u-boot.git/drivers/power, branch v2020.04-rc2

Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

2020-02-11T15:58:41Z

sandbox conversion to SDL2 TPM TEE driver Various minor sandbox video enhancements New driver model core utility functions

regulator: fix: Move code to enable gpio regulator to pre_probe from ofdata_to_platdata

2020-02-10T23:00:38Z

The commit e8e9715df2d4 ("regulator: fixed: Modify enable-active-high behavior") fixed the regulator driver behavior when 'enable-active-high' is defined. Unfortunately, this patch used dm_regulator_platdata()'s "boot_on" member to set GPIOD_IS_OUT_ACTIVE flag and enable the regulator. The issue here is that regulator_common_ofdata_to_platdata() is called _before_ regulator_pre_probe() function in which the 'regulator-boot-on' property is asserted. As a result the GPIOD_IS_OUT_ACTIVE flag is not set and gpio_request_by_name() called in the former function is not enabling the regulator. This is problematic for e.g. i.MX ethernet driver, which then tries to perform initialization without power (and fails). The solution here is to explicitly enable regulator in regulator_pre_probe() callback only when 'regulator-boot-on' property is present in device tree. The GPIOD_IS_OUT_ACTIVE flag is not set at all, but relevant gpio is requested. Signed-off-by: Lukasz Majewski Reviewed-by: Patrice Chotard Tested-by: Patrice Chotard

dm: core: Create a new header file for 'compat' features

2020-02-06T02:33:46Z

At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass

dm: core: Require users of devres to include the header

2020-02-06T02:33:46Z

At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass Reviewed-by: Anatolij Gustschin

power-domain: Rename free() to rfree()

2020-02-06T02:33:46Z

This function name conflicts with our desire to #define free() to something else on sandbox. Since it deals with resources, rename it to rfree(). Signed-off-by: Simon Glass Reviewed-by: Anatolij Gustschin

sandbox: pmic: Correct i2c pmic emulator platdata method

2020-02-06T02:33:46Z

This currently reads the uclass's private data in the ofdata_to_platdata method which is not allowed, since the uclass has not read it from the device tree. This happens in the probe method. Fix it by adding a probe() method and moving the code there. Signed-off-by: Simon Glass

dm: pci: Update the PCI read_config() method to const dev *

2020-02-06T02:33:45Z

At present this method uses a non-const udevice pointer, but the call should not modify the device. Use a const pointer. Signed-off-by: Simon Glass

power: regulator: add driver for Dialog DA9063 PMIC

2020-01-28T00:54:20Z

Add a driver for the regulators in the the DA9063 PMIC. Robert Beckett: move regulator modes to header so board code can set modes. Correct mode mask used in ldo_set_mode. Add an option CONFIG_SPL_DM_REGULATOR_DA9063. Signed-off-by: Martin Fuzzey Signed-off-by: Robert Beckett

power: pmic: add driver for Dialog DA9063 PMIC

2020-01-28T00:54:20Z

This adds the basic register access operations and child regulator binding (if a regulator driver exists). Robert Beckett: simplify accesses by using bottom bit of address as offset overflow. This avoids the need to track which page we are on. Add an option CONFIG_SPL_DM_PMIC_DA9063. Signed-off-by: Martin Fuzzey Signed-off-by: Robert Beckett

power: regulator: tps62360_regulator: Convert ofdata_to_platdata to the missing probe

2020-01-20T04:40:28Z

commit 29f7d05a347a ("dm: core: Move ofdata_to_platdata() call earlier") introduces changes in the order of device_probe execution. ofdata_to_platdata now comes before the probe function which resulted in a deadlock and caused boot hang on AM6 devices. Deadlock sequence: tps62360_regulator_ofdata_to_platdata --> i2c_get_chip --> device_probe(tps62360) --> tps62360_regulator_ofdata_to_platdata Hence convert ofdata_to_platdata to the missing probe function to fix the hang. Fixes: 22e8f18980d6 ("power: regulator: tps6236x: add support for tps6236x regulators") Signed-off-by: Keerthy Tested-by: Lokesh Vutla Signed-off-by: Lokesh Vutla