u-boot.git/drivers/qe, branch v2009.11

mpc85xx: Configure QE USB for MPC8569E-MDS boards

2009-10-27T15:04:17+00:00

Setup QE pin multiplexing for USB function, configure needed BCSRs
and add some fdt fixups.

Signed-off-by: Anton Vorontsov 
Signed-off-by: Kumar Gala

net: uec: Fix uccf.h and uec.h headers to include headers they depend on

2009-09-25T23:25:50+00:00

Headers should include headers containing prototypes and defines they
depend on, don't assume that they're included by somebody else.

Signed-off-by: Anton Vorontsov 
Signed-off-by: Kim Phillips

net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs

2009-09-25T23:25:41+00:00

This will be needed for MPC8360E-MDS boards with rev. 2.1 CPUs.

Signed-off-by: Anton Vorontsov 
Signed-off-by: Kim Phillips

UEC FIXED PHY: Determine fixed-phy port using UEC interface name.

2009-08-10T23:07:54+00:00

Fixed a misunderstanding in the original implementation, 'devnum' that
was used in the cpu/ppc4xx/4xx_enet.c implementation was NOT the
PHY's SMI address, rather it was the number of the MAC interface on
the CPU. The equivalent of this for uec_phy will be the UEC number
stored in mii_info->dev->name. Usage example is updated for uec.

Signed-off-by: Richard Retanubun 
Signed-off-by: Ben Warren

Assigned a static SMI address to all UECs TBIPA address.

2009-08-10T22:55:42+00:00

It is set to 0x1F by default and can be overwritten on the board
header file by defining CONFIG_UTBIPAR_INIT_TBIPA. This allows
the CPU to simply "reserve" one SMI address instead of using
a different one for each UEC.

Signed-off-by: Richard Retanubun 
Signed-off-by: Ben Warren

Coding style cleanup; update CHANGELOG

2009-07-07T20:35:02+00:00

Signed-off-by: Wolfgang Denk

drivers/qe: add sgmii support in for UEC driver

2009-06-12T22:17:02+00:00

Signed-off-by: Haiying Wang 
Signed-off-by: Kumar Gala

qe: Pass in uec_info struct through uec_initialize

2009-06-12T22:17:02+00:00

The uec driver contains code to hard code configuration information for the uec
ethernet controllers. This patch creates an array of uec_info structures, which
are then parsed by the corresponding driver instance to determine configuration.
It also creates function uec_standard_init() to initialize all UEC interfaces
for 83xx and 85xx.

Signed-off-by: Haiying Wang 
Signed-off-by: Kumar Gala

drivers/qe: Add more SNUM number for QE

2009-06-12T22:17:00+00:00

Some QE chips like 8569 need more SNUM numbers for supporting 4 UECs in RGMII-
1000 mode.

Signed-off-by: Haiying Wang 
Acked-by: Timur Tabi 
Signed-off-by: Kumar Gala

drivers/qe: Change QE RISC ALLOCATION to support 4 RISCs

2009-06-12T22:16:59+00:00

Also define the QE_RISC_ALLOCATION_RISCs to MACROs instead of using enum, and
define MAX_QE_RISC for QE based silicons.

Signed-off-by: Haiying Wang 
Acked-by: Timur Tabi 
Signed-off-by: Kumar Gala