u-boot.git/drivers/qe, branch v2014.01

drivers/qe: move the entry to drivers/Makefile

2013-11-17T19:11:31+00:00

Signed-off-by: Masahiro Yamada

drivers: convert makefiles to Kbuild style

2013-10-31T17:26:01+00:00

Signed-off-by: Masahiro Yamada

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

ppc: Move CONFIG_QE to arch_global_data

2013-02-04T14:05:42+00:00

Move the quantative easing fields into arch_global_data and tidy up.

Signed-off-by: Simon Glass

ppc: Move brg_clk to arch_global_data

2013-02-01T20:42:45+00:00

Move this field into arch_global_data and tidy up.

Signed-off-by: Simon Glass

mpc83xx: add support for mpc8309

2012-10-23T20:23:26+00:00

This processor, though very similar to other members of the
PowerQUICC II Pro family (namely 8308, 8360 and 832x), provides
yet another feature set than any supported sibling.

Signed-off-by: Gerlando Falauto 
Signed-off-by: Kim Phillips

powerpc/mpc8xxx: Remove P1015 and P1016 from CPU list

2012-08-23T15:24:16+00:00

P1015 is the same as P1011 and P1016 is the same as P1012 from software
point of view. They have different packages but share SVRs.

Signed-off-by: York Sun 
Signed-off-by: Andy Fleming

drivers/qe/uec.c: Fix compile warning

2012-05-22T18:41:48+00:00

Fix this:
uec.c: In function 'uec_initialize':
uec.c:1404:12: warning: assignment from incompatible pointer type

Signed-off-by: Joe Hershberger

net/miiphy/serial: drop duplicate "NAMESIZE" define

2012-03-18T19:11:22+00:00

A few subsystems are using the same define "NAMESIZE".  This has been
working so far because they define it to the same number.  However, I
want to change the size of eth_device's NAMESIZE, so rather than tweak
the define names, simply drop references to it.  Almost no one does,
and the handful that do can easily be changed to a sizeof().

Signed-off-by: Mike Frysinger

powerpc/85xx: clean up and document the QE/FMAN microcode macros

2011-11-29T14:48:06+00:00

Several macros are used to identify and locate the microcode binary image
that U-boot needs to upload to the QE or Fman.  Both the QE and the Fman
use the QE Firmware binary format to package their respective microcode data,
which is why the same macros are used for both.  A given SOC will only have
a QE or an Fman, so this is safe.

Unfortunately, the current macro definition and usage has inconsistencies.
For example, CONFIG_SYS_FMAN_FW_ADDR was used to define the address of Fman
firmware in NOR flash, but CONFIG_SYS_QE_FW_IN_NAND contains the address
of NAND.  There's no way to know by looking at a variable how it's supposed
to be used.

In the future, the code which uploads QE firmware and Fman firmware will
be merged.

Signed-off-by: Timur Tabi 
Signed-off-by: Kumar Gala