u-boot.git/drivers/qe, branch v2015.01

qe/deep-sleep: modify qe deep-sleep for generic board

2014-12-15T17:16:49+00:00

Deep sleep for generic board is supported now, modify qe
deep-sleep code to adapt it.

Signed-off-by: Zhao Qiang 
Reviewed-by: York Sun

u_qe: add u_qe_upload_firmware for u_qe

2014-11-19T20:56:19+00:00

Signed-off-by: Zhao Qiang 
Reviewed-by: York Sun

qe: add u-qe support to arm board

2014-11-19T20:55:45+00:00

ls1021 is arm-core and support qe which is u-qe.
add u-qe init for arm board.

Signed-off-by: Zhao Qiang 
[York Sun: Fix compiling error caused by u_qe_init()]
Reviewed-by: York Sun

net: Merge asm/fsl_enet.h into fsl_mdio.h

2014-09-08T17:30:33+00:00

fsl_enet.h defines the mapping of the usual MII management
registers, which are included in the MDIO register block
common to Freescale ethernet controllers. So it shouldn't
depend on the CPU architecture but it should be actually
part of the arch independent fsl_mdio.h.

To remove the arch dependency, merge the content of
asm/fsl_enet.h into fsl_mdio.h.
Some files (like fm_eth.h) were simply including fsl_enet.h
only for phy.h. These were updated to include phy.h instead.

Signed-off-by: Claudiu Manoil

driver/qe: update status of QE microcode

2014-08-20T17:44:16+00:00

This Patch updates error print for QE which should be easily understood

Signed-off-by: Vijay Rai 
Reviewed-by: York Sun

qe: move immap_qe.h from arch directory into common directory

2014-07-22T23:25:54+00:00

ls1021 is arm-core and supports qe too.
Move immap_qe.h into common directory for both arm and powerpc.

Signed-off-by: Zhao Qiang 
Reviewed-by: York Sun

qe: disable qe when qe-ucode fails to be uploaded for "deep sleep"

2014-05-13T15:26:56+00:00

when qe-ucode fails to be uploaded, "deep sleep" will hang.
if there is no qe-ucode, disable qe module for platforms
which support "deep sleep"

Signed-off-by: Zhao Qiang

QE/U-QE: Add U-QE support

2014-04-23T00:58:47+00:00

Modify code to adapt to both u-qe and qe.

U_QE is a kind of cutted QE.
the differences between U_QE and QE
	1. UCC: U_QE supports 2 UCCs while QE supports up to 8 UCCs.
	2. IMMR: have different immr base addr.
	3. iopin: U_QE doesn't need to config iopin.

Signed-off-by: Zhao Qiang 
Reviewed-by: York Sun

QE/FMAN: modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and CONFIG_SYS_QE_FW_ADDR

2014-04-23T00:58:47+00:00

CONFIG_SYS_QE_FMAN_FW_ADDR is used to both Fman and QE for microcode address.
Now using CONFIG_SYS_FMAN_FW_ADDR for Fman microcode address,
and CONFIG_SYS_QE_FW_ADDR for QE microcode address.

Signed-off-by: Zhao Qiang 
Reviewed-by: York Sun

drivers/qe: move the entry to drivers/Makefile

2013-11-17T19:11:31+00:00

Signed-off-by: Masahiro Yamada