u-boot.git/drivers/ram/aspeed, branch master

Merge patch series "arm: aspeed: add initial AST2700 SoC support"

2026-06-29T21:29:56Z

Ryan Chen says: AST2700 is the 8th generation of Integrated Remote Management Processor introduced by ASPEED Technology Inc. It is a Board Management Controller (BMC) SoC family with a dual-die architecture: SoC0 ("CPU" die with four ARM Cortex-A35 application cores) and SoC1 ("IO" die with peripherals) each SoC have its own SCU PLLs, clock dividers and reset domains. Link: https://lore.kernel.org/r/20260612-ast2700_clk-v4-0-9bea29cfdc39@aspeedtech.com

ram: aspeed: add SDRAM controller driver for AST2700

2026-06-29T19:43:21Z

Add a SDRAM controller driver for the AST2700, derived from the existing AST2700 controller code used by the Ibex SPL but adapted to run from ARM U-Boot proper on the Cortex-A35 cores. The DDR4/DDR5 controller and its DesignWare PHY are programmed by the Ibex SPL before ARM U-Boot proper takes over. This driver reads back the configuration left by the SPL, probes the controller, and exposes ram_info (base and size, with the VGA carve-out subtracted) via UCLASS_RAM so that dram_init() can populate gd->ram_size. The PHY firmware-load entry points (dwc_ddrphy_phyinit_userCustom_*) are kept compiled but call a __weak fmc_hdr_get_prebuilt() stub when ARM U-Boot proper is the caller; the real implementation is provided by the Ibex SPL via the same fmc_hdr.h descriptor format (here added for the ARM build). Adds the supporting register-layout headers under arch/arm/include/asm/arch-aspeed/: - sdram.h: SDRAM controller and DWC PHY register definitions - scu.h: SCU bits referenced by the SDRAM driver - fmc_hdr.h: prebuilt-blob descriptor (binary-compatible with arch/riscv/include/asm/arch-ast2700/fmc_hdr.h used by the Ibex SPL) Signed-off-by: Ryan Chen

Kconfig: drivers: restyle remaining

2026-06-25T21:00:58Z

Restyle all Kconfigs for the rest of "drivers": Menu entries : no space left Menu attributes: 1 TAB Help text : 1 TAB + 2 spaces Replace '---help---' by 'help' Signed-off-by: Johan Jonker [trini: Add missing indentation on a few more multi-paragraph help texts] Signed-off-by: Tom Rini

ram: aspeed: Use dev_read_addr_x() API

2026-06-09T20:53:34Z

Use dev_read_addr_ptr() and dev_read_addr_index_ptr() which support both live device tree and flat DT backends, avoiding direct dependency on devfdt_* helpers. While at here, also use ofnode_read_s32_default() to replace fdtdec_get_int(). No functional changes. Signed-off-by: Peng Fan

ram: ast2700: Add DRAM controller initialization

2024-09-11T12:35:03Z

Add driver for AST2700 to initialize DRAM in SPL. This patch also refactors the Kconfig dependency of Aspeed DRAM drivers as some of them are shared among the file structures of RV and ARM ISAs. Signed-off-by: Chia-Wei Wang Acked-by: Leo Yu-Chi Liang

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03Z

As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36Z

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman Signed-off-by: Tom Rini

ram: Remove and add needed includes

2024-05-07T14:00:56Z

Remove from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini

ram: ast2600: Keep MPLL power on

2023-03-06T22:03:56Z

According to the PLL vendor, we should keep the PLL power on, so we shouldn't toggle the power-down bit during PLL initialization. Signed-off-by: Dylan Hung Reviewed-by: Joel Stanley

global: Finish CONFIG -> CFG migration

2023-01-20T17:27:24Z

At this point, the remaining places where we have a symbol that is defined as CONFIG_... are in fairly odd locations. While as much dead code has been removed as possible, some of these locations are simply less obvious at first. In other cases, this code is used, but was defined in such a way as to have been missed by earlier checks. Perform a rename of all such remaining symbols to be CFG_... rather than CONFIG_... Signed-off-by: Tom Rini Reviewed-by: Simon Glass