Enable DRAM ASR, auto self-refresh, conditionally, based on DT PWRCTL
register bits. While ASR does save considerable amount of power at
runtime automatically, it also causes LTDC underruns on large panels.
Let user select whether or not ASR is required or not, generally ASR
should be enabled on portable and battery operated devices.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>

Allow device tree to provide ti,ddr-freq0 to be used as the initial DDR
frequency that is set for lpddr4 before initialization of the
controller. Make this optional and continue to use PLL bypass frequency
as is done currently if ti,ddr-freq0 is not provided.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>

The k3-ddrss driver wants to configure the DDRSS_V2A_CTL_REG to reflect
the maximum possible SDRAM of 2 GB for AM64x (instead of the register's
default that says 8 GB, which the AM64x DDR controller wouldn't support).

The offset 0x20 was correct, but the register name DDRSS_V2A_R1_MAT_REG
was that of the next register at offset 0x24.

Signed-off-by: Dominic Rath <rath@ibv-augsburg.net>

Add rockchip rk3066 sdram driver

Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>

Makes it possible to use 16-bit DDR memory.

Signed-off-by: Dominic Rath <rath@ibv-augsburg.net>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>

Introduce ECC Functionality for full memory space as implemented in the
DDRSS. The following is done to accomplish this:

 * Introduce a memory region "ss" to allow dt to provide DDRSS region,
   which is not the same as "ctl" which is the controller region.

 * Introduce a "ti,ecc-enable" flag which allows a memorycontroller
   instance to enable ecc.

 * Introduce functionality to properly program the DDRSS registers to
   enable ECC for the full DDR memory space if enabled with above flag.

 * Expose a k3_ddrss_ddr_fdt_fixup call to allow fixup of fdt blob to
   account from DDR memory that must be reserved for ECC operation.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>

The current address being read from dt actually represents the ddrss_ctl
memory region, while ddrss_ss region is something else. Introduce
ddrss_ctl_regs and use it to free up ddrss_ss_regs for its proper
purpose later so that we can avoid confusion.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>

Prepare v2022.04-rc5

A comma at the end of a line gives sometimes strange
effects in combination with some code formatters,
so replace a comma by a semicolon in the sdram_rk3188.c
and sdram_rk3288.c files.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>