When you enable CONFIG_OF_LIVE, you will end up with a lot of
conversions.

To help this tedious work, this commit converts devfdt_get_addr_ptr()
to dev_read_addr_ptr() by coccinelle. I also removed redundant casts
because dev_read_addr_ptr() returns an opaque pointer.

To generate this commit, I ran the following semantic patch
excluding include/dm/.

  <smpl>
  @@
  type T;
  expression dev;
  @@
  -(T *)devfdt_get_addr_ptr(dev)
  +dev_read_addr_ptr(dev)
  @@
  expression dev;
  @@
  -devfdt_get_addr_ptr(dev)
  +dev_read_addr_ptr(dev)
  </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Add necessary defconfig and Kconfig entries to enable SiFive SoC's
reset driver so as to utilise U-Boot's reset framework.

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>

PRCI module within SiFive SoC's has register with which we can
reset the sub-systems within the SoC. The resets to DDR and ethernet
sub systems within FU540-C000 SoC are active low, and are hold low
by default on power-up. Currently these are directly asserted within
prci driver via register read/write.
With the DM based reset driver support here, we bind the reset
driver with clock (prci) driver and assert the reset signals of
both sub-system's appropriately.

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>

When you enable CONFIG_OF_LIVE, you will end up with a lot of
conversions.

To generate this commit, I used coccinelle excluding drivers/core/,
include/dm/, and test/

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  expression dev;
  @@
  -devfdt_get_addr(dev)
  +dev_read_addr(dev)
  </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing
changes made to 56d37f1c564107e27d873181d838571b7d7860e7.

Unfortunately this is causing CI failures:
https://travis-ci.org/github/trini/u-boot/jobs/711313649

Signed-off-by: Tom Rini <trini@konsulko.com>

When you enable CONFIG_OF_LIVE, you will end up with a lot of
conversions.

To generate this commit, I used coccinelle excluding drivers/core/,
include/dm/, and test/

The semantic patch that makes this change is as follows:

  <smpl>
  @@
  expression dev;
  @@
  -devfdt_get_addr(dev)
  +dev_read_addr(dev)
  </smpl>

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Raspberry Pi 4's co-processor controls some of the board's HW
initialization process, but it's up to Linux to trigger it when
relevant. Introduce a reset controller capable of interfacing with
RPi4's co-processor that models these firmware initialization routines as
reset lines.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>

This patch adds a generic reset driver. It is designed to be useful when
one has a register in a regmap which contains bits that reset other
devices. I thought this seemed like a very generic use, so here is a
generic driver. The overall structure has been modeled on the syscon-reboot
driver.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>