u-boot.git/drivers/reset, branch v2024.07 Unnamed repository; edit this file 'description' to name the repository. Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" 2024-05-19T14:16:36+00:00 Tom Rini trini@konsulko.com 2024-05-19T02:20:43+00:00 d678a59d2d719da9e807495b4b021501f2836ca5 When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> 
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
reset: Remove <common.h> and add needed includes 2024-05-07T14:00:56+00:00 Tom Rini trini@konsulko.com 2024-05-02T01:31:14+00:00 174f184a84734a20a4d79a23912cc992dda1ce34 Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> 
Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
reset: imx: Add support for i.MX8MP reset controller 2024-03-24T16:35:59+00:00 Sumit Garg sumit.garg@linaro.org 2024-03-21T14:54:59+00:00 a295bd86be24b929df1b7ac40b1fbec9f827a458 Add support for i.MX8MP reset controller, it has same reset IP inside as the other iMX7 and iMX8M variants but with different module layout. Inspired from counterpart Linux kernel v6.8-rc3 driver: drivers/reset/reset-imx7.c. Use last Linux kernel driver reference commit bad8a8afe19f ("reset: Explicitly include correct DT includes"). Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8mp-venice* Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> 
Add support for i.MX8MP reset controller, it has same reset IP inside
as the other iMX7 and iMX8M variants but with different module layout.

Inspired from counterpart Linux kernel v6.8-rc3 driver:
drivers/reset/reset-imx7.c. Use last Linux kernel driver reference
commit bad8a8afe19f ("reset: Explicitly include correct DT includes").

Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8mp-venice*
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
reset: imx: Refactor driver to simplify function names 2024-03-24T16:35:59+00:00 Sumit Garg sumit.garg@linaro.org 2024-03-21T14:54:58+00:00 78d7c9d481301102e0b2c1ce0098448a6ee226f5 imx7_reset_{deassert/assert}_imx* are a bit more confusing when compared with imx*_reset_{deassert/assert}. So refactor driver to use function names easier to understand. This shouldn't affect the functionality though. Suggested-by: Marek Vasut <marex@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> 
imx7_reset_{deassert/assert}_imx* are a bit more confusing when compared
with imx*_reset_{deassert/assert}. So refactor driver to use function
names easier to understand. This shouldn't affect the functionality
though.

Suggested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
reset: reset-hisilicon: also handle #reset-cells = <2> 2024-01-24T21:17:14+00:00 Yang Xiwen forbidden405@outlook.com 2024-01-19T12:49:17+00:00 53c3e386063b9e1ab955d4658a035f1eea8a1cc0 It's also valid to have #reset-cells = <2> while the third arg defaults to ASSERT_SET. Signed-off-by: Yang Xiwen <forbidden405@outlook.com> 
It's also valid to have #reset-cells = <2> while the third arg defaults
to ASSERT_SET.

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
reset: npcm: Add support for Nuvoton NPCM BMC family 2024-01-16T22:05:29+00:00 Jim Liu jim.t90615@gmail.com 2024-01-03T07:29:33+00:00 883a7a982a56b1e121f77b1d30ce880a0164d624 Add reset controller driver for Nuvoton BMCs. The npcm reset driver not only supports reset each module reset but setting initial value of reset Control Registers. And The driver support each module reset. Signed-off-by: Jim Liu <JJLIU0@nuvoton.com> 
Add reset controller driver for Nuvoton BMCs.
The npcm reset driver not only supports reset each module reset
but setting initial value of reset Control Registers.

And The driver support each module reset.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
clk/qcom: handle resets and clocks in one device 2024-01-16T12:26:23+00:00 Konrad Dybcio konrad.dybcio@linaro.org 2023-11-07T12:41:01+00:00 3ead661633293413e9af6d1e20c0a1a362d08ee8 Qualcomm's clock controller blocks actually do much more than it says on the tin.. They provide clocks, resets and power domains. Currently, U-Boot requires one to spawn 2 separate devices for controlling clocks and resets, both spanning the same register space. Refactor the code to make it work with just a single DT node, making it compatible with upstream Linux bindings and dropping the dedicated reset driver in favour of including it in the clock driver. Heavily inspired by Renesas code for a similar hw block. [caleb: moved drivers to clk/qcom, added reset driver and adjusted bind logic. Imported qcom,gcc-ipq4019.h from Linux] Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> 
Qualcomm's clock controller blocks actually do much more than it
says on the tin.. They provide clocks, resets and power domains.
Currently, U-Boot requires one to spawn 2 separate devices for
controlling clocks and resets, both spanning the same register space.
Refactor the code to make it work with just a single DT node, making
it compatible with upstream Linux bindings and dropping the dedicated
reset driver in favour of including it in the clock driver.

Heavily inspired by Renesas code for a similar hw block.

[caleb: moved drivers to clk/qcom, added reset driver and adjusted bind
logic. Imported qcom,gcc-ipq4019.h from Linux]

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
tree-wide: Replace http:// link with https:// link for ti.com 2023-11-10T16:01:50+00:00 Nishanth Menon nm@ti.com 2023-11-01T20:56:03+00:00 a94a4071d449e12c9fb5ac37d6362d22efcb27da Replace instances of http://www.ti.com with https://www.ti.com Signed-off-by: Nishanth Menon <nm@ti.com> 
Replace instances of http://www.ti.com with https://www.ti.com

Signed-off-by: Nishanth Menon <nm@ti.com>
Merge tag 'u-boot-amlogic-20231015' of https://source.denx.de/u-boot/custodians/u-boot-amlogic 2023-10-16T13:09:54+00:00 Tom Rini trini@konsulko.com 2023-10-16T13:09:54+00:00 2e1577e8360d8e467bf28009f6763a2ac511f743 - add Amlogic A1 clock driver - add Amlogic A1 reset support - add USB Device support for Amlogic A1 - enable RNG on Amlogic A1 & Amlogic S4 - move Amlogic Secure Monitor to standalone driver 
- add Amlogic A1 clock driver
- add Amlogic A1 reset support
- add USB Device support for Amlogic A1
- enable RNG on Amlogic A1 & Amlogic S4
- move Amlogic Secure Monitor to standalone driver
scmi: refactor the code to hide a channel from devices 2023-10-13T20:59:23+00:00 AKASHI Takahiro takahiro.akashi@linaro.org 2023-10-11T10:06:54+00:00 c6230cd8427c906baa52dbff5b95027ef58e6048 The commit 85dc58289238 ("firmware: scmi: prepare uclass to pass channel reference") added an explicit parameter, channel, but it seems to make the code complex. Hiding this parameter will allow for adding a generic (protocol-agnostic) helper function, i.e. for PROTOCOL_VERSION, in a later patch. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com> 
The commit 85dc58289238 ("firmware: scmi: prepare uclass to pass channel
reference") added an explicit parameter, channel, but it seems to make
the code complex.

Hiding this parameter will allow for adding a generic (protocol-agnostic)
helper function, i.e. for PROTOCOL_VERSION, in a later patch.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>