If there is a SoC specific SCMI protocol driver, using
scmi_proto_driver_get() function can avoid to add SoC specific code to
scmi_agent-uclass.c.

Signed-off-by: Alice Guo <alice.guo@nxp.com>

The current DT bindings for the rk3576 clock use a different ID than the
one that is supposed to be written to the hardware registers.
Thus, we cannot use directly the id provided in the phandle, but rather
use a lookup table to correctly setup the hardware.

This follows the implementation done in the Linux-Kernel and also
how the rk3588 does this both in the Linux-Kernel as well as U-Boot.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
[adapted from mainline Linux code for u-boot]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Add clock driver for RK3528.

Imported from vendor U-Boot linux-6.1-stan-rkr5 tag with minor
adjustments and fixes for mainline.

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Current implementation releases most peripherals out of reset for
gen5, but A10 has more peripherals than gen5, hence this patch is
required to release the rest of peripherals to support old kernels.

Signed-off-by: Tien Fong Chee <tien.fong.chee@altera.com>
Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapalli@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>

Christian Marangi <ansuelsmth@gmail.com> says:

This little series adds initial support for Airoha AN7581 SoC.

With the help of some backport patch, this use OF_UPSTREAM
directly.

Posting this to have the targer and the very basic driver.

Ethernet, SNAND and eMMC support is already ready downstream
and will be posted shortly after this gets approved.

Having the first driver ready permits to separately push
dedicate series for SNAND, eMMC and Ethrnet as they all depends
on basic support of clock and reset and nothing else.

Link: https://lore.kernel.org/r/20250314185941.27834-1-ansuelsmth@gmail.com

Add driver for controlling the reset lines of AN7581. This is a detached
version of the clock controller driver present in Linux only used to
control reset lines. Driver gets loaded with the bind of the clock
driver and doesn't require a compatible. This is needed as they share
the same registers.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

Add spacemit reset driver.

Signed-off-by: Huan Zhou <me@per1cycle.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

Bind the USB VBUS regulator driver under the USB PHY reset driver for
the Renesas RZ/G2L and related SoCs. This additional bind is needed as
the corresponding device tree node does not contain a compatible string.

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>

Add a new driver to control the USB 2.0 PHY reset controller on the
Renesas RZ/G2L and related SoCs.

Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.

Update the comment in bootstage to refer to this symbol, instead of
SPL_

Signed-off-by: Simon Glass <sjg@chromium.org>