u-boot.git/drivers/rtc/Makefile, branch v2015.04

mpc8260: remove atc board support

2015-01-05T17:08:55+00:00

These boards are still non-generic boards.

drivers/rtc/ds12887.c should also be removed because it can not
be built without CONFIG_ATC.

Signed-off-by: Masahiro Yamada 
Cc: Wolfgang Denk

RTC: add support for DS1339 (using DS1307 driver)

2014-08-14T12:45:58+00:00

Signed-off-by: Markus Niebel

kbuild: use Linux Kernel build scripts

2014-02-19T16:07:50+00:00

Now we are ready to switch over to real Kbuild.

This commit disables temporary scripts:
  scripts/{Makefile.build.tmp, Makefile.host.tmp}
and enables real Kbuild scripts:
  scripts/{Makefile.build,Makefile.host,Makefile.lib}.

This switch is triggered by the line in scripts/Kbuild.include
  -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj
  +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj

We need to adjust some build scripts for U-Boot.
But smaller amount of modification is preferable.

Additionally, we need to fix compiler flags which are
locally added or removed.

In Kbuild, it is not allowed to change CFLAGS locally.
Instead, ccflags-y, asflags-y, cppflags-y,
CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o
are prepared for that purpose.

Signed-off-by: Masahiro Yamada 
Tested-by: Gerhard Sittig

drivers: convert makefiles to Kbuild style

2013-10-31T17:26:01+00:00

Signed-off-by: Masahiro Yamada

drivers: s3c44b0_rtc: delete an unused driver

2013-09-19T07:52:08+00:00

Since commit 5dc5f36 removed B2 board support,
there are no boards enabling s3c44b0_rtc.

Signed-off-by: Masahiro Yamada 
Cc: Wolfgang Denk 
Cc: Andrea Scian

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

rtc: add support of mx27 rtc

2012-09-01T12:58:25+00:00

This driver has been tested on board armadeus apf27.

Signed-off-by: Philippe Reynes 
Acked-by: Stefano Babic

rtc: imxdi: Initial support

2012-09-01T12:58:18+00:00

Add support for Freescale's i.MX DryIce RTC, present on i.MX25.

Signed-off-by: Benoît Thébaudeau 
Cc: Wolfgang Denk 
Cc: Stefano Babic 
Acked-by: Stefano Babic

Add support for DS1388.

2012-08-10T21:46:54+00:00

Support for DS1388 is added by extending the DS1337 driver. DS1388 is
similar to DS1337. The time registers are offset by 1 (due to support
for hundreds of seconds), and there is no century bit.
The configuration and trickle charge registers are also different.
Tested on hardware with Freescale P2010 and DS1388.

Signed-off-by: Kenth Eriksson

iMX28: Add driver for internal RTC

2011-11-11T10:36:57+00:00

Signed-off-by: Marek Vasut 
Cc: Stefano Babic 
Cc: Wolfgang Denk 
Cc: Detlev Zundel