u-boot.git/drivers/rtc/rx8025.c, branch master Unnamed repository; edit this file 'description' to name the repository. Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet" 2024-05-20T19:35:03+00:00 Tom Rini trini@konsulko.com 2024-05-20T19:35:03+00:00 03de305ec48b0bb28554372abb40ccd46dbe0bf9 As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> 
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" 2024-05-19T14:16:36+00:00 Tom Rini trini@konsulko.com 2024-05-19T02:20:43+00:00 d678a59d2d719da9e807495b4b021501f2836ca5 When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> 
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
rtc: Remove <common.h> and add needed includes 2024-05-07T14:00:56+00:00 Tom Rini trini@konsulko.com 2024-05-02T01:31:15+00:00 16a50b666d4aab6f1cb43b8d99a1d259ba04c753 Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> 
Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
rtc: rx8025: revise single register write to use offset 2021-10-03T18:40:56+00:00 Mathew McBride matt@traverse.com.au 2021-09-17T06:46:04+00:00 701c04f331f8389c9def2f61ef2a5d7d3e3e5bfd Writing of individual registers was not functioning correctly as a 0 'offset' byte under DM-managed I2C was being appended in front of register we wanted to access. Signed-off-by: Mathew McBride <matt@traverse.com.au> 
Writing of individual registers was not functioning
correctly as a 0 'offset' byte under DM-managed
I2C was being appended in front of register we
wanted to access.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
rtc: rx8025: set date in a single i2c transaction 2021-10-03T18:40:56+00:00 Mathew McBride matt@traverse.com.au 2021-09-17T06:46:03+00:00 771fc0c0798a3c2f9d0c51cdf8f1f2eff90dbafb The RX8025/RX8035 does not like having it's time registers set byte-by-byte in separate I2C transactions. From the note at the top of the file, it appears target-dependent workarounds have been used in the past for this. Resolve this by setting the time registers in a single I2C transaction. As part of this, also ensure the '24/12' flag in the RTC is reset before writing the date (instead of after), otherwise the RX8035 will clear the seconds and minutes registers. Tested on Traverse Ten64 (NXP LS1088A) with RX8035. Signed-off-by: Mathew McBride <matt@traverse.com.au> 
The RX8025/RX8035 does not like having it's time registers
set byte-by-byte in separate I2C transactions.

From the note at the top of the file, it appears
target-dependent workarounds have been used in the
past for this.

Resolve this by setting the time registers in a single
I2C transaction.

As part of this, also ensure the '24/12' flag in the RTC
is reset before writing the date (instead of after), otherwise
the RX8035 will clear the seconds and minutes registers.

Tested on Traverse Ten64 (NXP LS1088A) with RX8035.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
rtc: rx8025: add support for EPSON RX8035. 2021-10-03T18:40:56+00:00 Mathew McBride matt@traverse.com.au 2021-09-17T06:46:02+00:00 9ca4ae2d2a7300e9d2bfdd0b818aacc854c7c617 The RX8035 is a newer model from EPSON which is very similar in operation to the RX8025. The changes mirror similar ones that will be in Linux 5.15: https://lore.kernel.org/all/20210709044518.28769-2-matt@traverse.com.au/ The UBOOT_DRIVER ID has also been corrected, previously it declared itself as rx8010sj_rtc which is a different driver. Signed-off-by: Mathew McBride <matt@traverse.com.au> 
The RX8035 is a newer model from EPSON which is
very similar in operation to the RX8025.

The changes mirror similar ones that will be
in Linux 5.15:
https://lore.kernel.org/all/20210709044518.28769-2-matt@traverse.com.au/

The UBOOT_DRIVER ID has also been corrected, previously
it declared itself as rx8010sj_rtc which is a different driver.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
rtc: rx8025: drop non-DM support 2021-10-03T18:40:56+00:00 Mathew McBride matt@traverse.com.au 2021-09-17T06:46:01+00:00 152ef916f8f3a8b650aa7ab1ea5b4e9555011536 A search of the tree showed there is only one user of this driver (soon to be two) - board/socrates The second user will be the Traverse Ten64 board. Both these boards have DM_RTC. Signed-off-by: Mathew McBride <matt@traverse.com.au> 
A search of the tree showed there is only one user
of this driver (soon to be two) - board/socrates

The second user will be the Traverse Ten64 board.

Both these boards have DM_RTC.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
rtc, rx8025: add DM support 2019-07-29T13:32:12+00:00 Heiko Schocher hs@denx.de 2019-07-16T03:31:35+00:00 0c4e81e0eb6bec3aab1f4500f8fb347202c5b601 add DM support for this RTC driver. Signed-off-by: Heiko Schocher <hs@denx.de> 
add DM support for this RTC driver.

Signed-off-by: Heiko Schocher <hs@denx.de>
rtc, rx8025: fix Coding Style 2019-07-29T13:32:12+00:00 Heiko Schocher hs@denx.de 2019-07-16T03:31:34+00:00 f91fb7242a308d986574ec35281edcda1c149b4c fix Coding Style for this driver. Signed-off-by: Heiko Schocher <hs@denx.de> 
fix Coding Style for this driver.

Signed-off-by: Heiko Schocher <hs@denx.de>
rtc: remove CONFIG_CMD_DATE dependency 2018-07-25T13:00:24+00:00 Heinrich Schuchardt xypron.glpk@gmx.de 2018-07-07T21:39:12+00:00 5d889024010e0d2397c2bd3e6dd66e12e9f657d0 The EFI subsystem accesses the real time clock and is enabled by default. So we should drop any CONFIG_CMD_DATE dependency from the real time clock drivers. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de> 
The EFI subsystem accesses the real time clock and is enabled by default.
So we should drop any CONFIG_CMD_DATE dependency from the real time clock
drivers.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>