u-boot.git/drivers/rtc, branch v2010.03

Merge branch 'master' into next

2009-12-05T01:11:59+00:00

Conflicts:
	board/esd/plu405/plu405.c
	drivers/rtc/ftrtc010.c

Signed-off-by: Wolfgang Denk

RTC: Fix return code in MC13783 RTC driver.

2009-12-02T22:29:18+00:00

Signed-off-by: Magnus Lilja

m41t11: Remove unused functions

2009-12-02T22:21:02+00:00

Signed-off-by: Peter Tyser

arm: A320: driver for FTRTC010 real time clock

2009-11-27T22:26:17+00:00

This patch adds an FTRTC010 driver for Faraday A320 evaluation board.

Signed-off-by: Po-Yu Chuang

Add a unified s3c24x0 header file

2009-11-27T22:26:13+00:00

This patch adds a unified s3c24x0 cpu header file that selects the header
file for the specific s3c24x0 cpu from the SOC and CPU configs defined in
board config file. This removes the current chain of s3c24-type #ifdef's
from the s3c24x0 code.

Signed-off-by: Kevin Morfitt 
Signed-off-by: Minkyu Kang

Move s3c24x0 header files to asm-arm/arch-s3c24x0/

2009-11-27T22:26:12+00:00

This patch moves the s3c24x0 header files from include/ to
include/asm-arm/arch-s3c24x0/.

checkpatch.pl showed 2 errors and 3 warnings. The 2 errors were both due
to a non-UTF8 character in David M?ller's name:

ERROR: Invalid UTF-8, patch and commit message should be encoded in UTF-8
#489: FILE: include/asm-arm/arch-s3c24x0/s3c2410.h:3:
+ * David M?ller ELSOFT AG Switzerland. d.mueller@elsoft.ch

As David's name correctly contains a non-UTF8 character I haven't fixed
these errors.

The 3 warnings were all because of the use of 'volatile' in s3c24x0.h:

WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt
#673: FILE: include/asm-arm/arch-s3c24x0/s3c24x0.h:35:
+typedef volatile u8	S3C24X0_REG8;
+typedef volatile u16	S3C24X0_REG16;
+typedef volatile u32	S3C24X0_REG32;

I'll fix these errors in another patch.

Tested by running MAKEALL for ARM8 targets and ensuring there were no new
errors or warnings.

Signed-off-by: Kevin Morfitt 
Signed-off-by: Minkyu Kang

Fix for Void function returning value in sbc35-a9g20

2009-11-27T22:26:11+00:00

Void function was returning 0 in the m41t94 rtc driver.
This makes it similar to m41t62 rtc driver.

Signed-off-by: Sandeep Paulraj

Add driver for FTRTC010 real time clock

2009-11-22T21:26:35+00:00

Signed-off-by: Po-Yu Chuang 

Edited commit message.
Signed-off-by: Wolfgang Denk

Clean-up of s3c24x0 drivers excluding nand driver

2009-10-14T02:13:56+00:00

This patch re-formats the arm920t s3c24x0 driver files, excluding the nand
driver, in preparation for changes to add support for the Embest SBC2440-II Board.

The changes are as follows:
- re-indent the code using Lindent
- make sure register layouts are defined using a C struct
- replace the upper-case typedef'ed C struct names with lower case
  non-typedef'ed ones
- make sure registers are accessed using the proper accessor functions
- run checkpatch.pl and fix any error reports

It assumes the following patch has been applied first:
- [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009
- patches 1/4 and 2/4 of this series

Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
any s3c2400 or s3c2410 boards but need this patch applying before I can submit
patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400,
smdk2410 and trab configs to use the mtd nand driver (which isn't used by any
board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or
errors were found.

Signed-off-by: Kevin Morfitt 
Signed-off-by: Minkyu Kang

rtc/ds1337.c: Allow to set TCR register

2009-09-23T22:20:33+00:00

This is needed to correctly start the charging of an attached capacitor
or battery.

Signed-off-by: Werner Pfister 
Signed-off-by: Detlev Zundel