u-boot.git/drivers/rtc, branch v2015.01

mpc8260: remove atc board support

2015-01-05T17:08:55+00:00

These boards are still non-generic boards.

drivers/rtc/ds12887.c should also be removed because it can not
be built without CONFIG_ATC.

Signed-off-by: Masahiro Yamada 
Cc: Wolfgang Denk

Replace with

2014-12-08T14:35:46+00:00

Including  is enough for general use.

Signed-off-by: Masahiro Yamada

rtc: mc146818: Set up RTC at start of day

2014-11-25T13:33:59+00:00

Provide a function to set up the RTC ready for use.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

arm: marvell: Move arch/kirkwood.h to arch/soc.h

2014-10-23T13:59:20+00:00

This move makes is possible to use this header not only from kirkwood
platforms but from all Marvell mvebu platforms.

Signed-off-by: Stefan Roese 
Tested-by: Luka Perkov 
Acked-by: Prafulla Wadaskar

kconfig: add blank Kconfig files

2014-09-24T22:30:28+00:00

This would be useful to start moving various config options.

Signed-off-by: Masahiro Yamada 
Acked-by: Simon Glass 
Tested-by: Simon Glass

RTC: add support for DS1339 (using DS1307 driver)

2014-08-14T12:45:58+00:00

Signed-off-by: Markus Niebel

kbuild: use Linux Kernel build scripts

2014-02-19T16:07:50+00:00

Now we are ready to switch over to real Kbuild.

This commit disables temporary scripts:
  scripts/{Makefile.build.tmp, Makefile.host.tmp}
and enables real Kbuild scripts:
  scripts/{Makefile.build,Makefile.host,Makefile.lib}.

This switch is triggered by the line in scripts/Kbuild.include
  -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj
  +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj

We need to adjust some build scripts for U-Boot.
But smaller amount of modification is preferable.

Additionally, we need to fix compiler flags which are
locally added or removed.

In Kbuild, it is not allowed to change CFLAGS locally.
Instead, ccflags-y, asflags-y, cppflags-y,
CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o
are prepared for that purpose.

Signed-off-by: Masahiro Yamada 
Tested-by: Gerhard Sittig

Merge branch 'master' of git://git.denx.de/u-boot-mips

2013-11-11T14:40:34+00:00

Merge branch 'iu-boot/master' into 'u-boot-arm/master'

2013-11-09T21:59:47+00:00

Conflicts:
	arch/arm/cpu/arm926ejs/mxs/Makefile
	board/compulab/cm_t35/Makefile
	board/corscience/tricorder/Makefile
	board/ppcag/bg0900/Makefile
	drivers/bootcount/Makefile
	include/configs/omap4_common.h
	include/configs/pdnb3.h

Makefile conflicts are due to additions/removals of
object files on the ARM branch vs KBuild introduction
on the main branch. Resolution consists in adjusting
the list of object files in the main branch version.
This also applies to two files which are not listed
as conflicting but had to be modified:

	board/compulab/common/Makefile
	board/udoo/Makefile

include/configs/omap4_common.h conflicts are due to
the OMAP4 conversion to ti_armv7_common.h on the ARM
side, and CONFIG_SYS_HZ removal on the main side.
Resolution is to convert as this icludes removal of
CONFIG_SYS_HZ.

include/configs/pdnb3.h is due to a removal on ARM side.
Trivial resolution is to remove the file.

Note: 'git show' will also list two files just because
they are new:

	include/configs/am335x_igep0033.h
	include/configs/omap3_igep00x0.h

malta: enable RTC support

2013-11-09T16:21:02+00:00

This is actually required in order for a Linux kernel to boot
successfully on a physical Malta board. Without enabling the RTC, a
Malta Linux kernel will get stuck in its estimate_frequencies function
on boot.

Signed-off-by: Paul Burton