u-boot.git/drivers/scsi, branch v2020.07 Unnamed repository; edit this file 'description' to name the repository. common: Drop log.h from common header 2020-05-19T01:19:18+00:00 Simon Glass sjg@chromium.org 2020-05-10T17:40:05+00:00 f7ae49fc4f363a803dab3be078e93ead8e75a8e9 Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> 
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
common: Drop bootstage.h from common header 2020-05-18T21:33:33+00:00 Simon Glass sjg@chromium.org 2020-05-10T17:40:00+00:00 52f24238046ca28085f6de946d0358e5c7c7cbe8 Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> 
Move this fairly uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
common: Drop part.h from common header 2020-05-18T21:33:33+00:00 Simon Glass sjg@chromium.org 2020-05-10T17:39:58+00:00 e6f6f9e64882ddf242437c73fdd9ff06a8eb7c21 Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> 
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
scsi: Add dma direction member to command structure 2019-10-24T00:47:12+00:00 Faiz Abbas faiz_abbas@ti.com 2019-10-15T12:54:35+00:00 8fbac8e23e55a63c218b8d737e629a8d07e9a840 Some SCSI devices like UFS use DMA for executing scsi commands and hence need to know the direction of transfer of the dma. Add a dma_dir element to the command structure to facilitate this. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> 
Some SCSI devices like UFS use DMA for executing scsi commands and hence
need to know the direction of transfer of the dma. Add a dma_dir element
to the command structure to facilitate this.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
scsi: Retry inquiry 3 times to overcome Unit Attention condition 2019-10-24T00:47:12+00:00 Faiz Abbas faiz_abbas@ti.com 2019-10-15T12:54:34+00:00 d48f00ed11d04eb76d4510b3db1d7f36f758d4e9 The UFS SCSI device LUNs are observed to return failure the first time a unit ready inquiry is sent and pass on the second try. Send this inquiry 3 times to make sure device is ready. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> 
The UFS SCSI device LUNs are observed to return failure the first time a
unit ready inquiry is sent and pass on the second try. Send this
inquiry 3 times to make sure device is ready.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
scsi: Add max_bytes_per_req to scsi_platdata 2019-10-24T00:47:12+00:00 Faiz Abbas faiz_abbas@ti.com 2019-10-15T12:54:33+00:00 4ff572830eb1ae95fa85f8ab585521ccc1d86845 Add max_bytes_per_req to scsi_platdata to enable the host driver to limit the number of bytes that can be read/written per request. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> 
Add max_bytes_per_req to scsi_platdata to enable the host driver to limit
the number of bytes that can be read/written per request.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
scsi: Simplify scsi_read()/_write() 2019-10-24T00:47:12+00:00 Faiz Abbas faiz_abbas@ti.com 2019-10-15T12:54:32+00:00 66c54f1a3e467e25093253020a75f6b288b7281f With no non-DM driver using scsi_read()/_write() APIs, remove the legacy implementations. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> [trini: Reorder slightly and mark scsi_read/write behind BLK test to avoid warnings] Signed-off-by: Tom Rini <trini@konsulko.com> 
With no non-DM driver using scsi_read()/_write() APIs, remove
the legacy implementations.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
[trini: Reorder slightly and mark scsi_read/write behind BLK test to
avoid warnings]
Signed-off-by: Tom Rini <trini@konsulko.com>
env: Move env_set_ulong() to env.h 2019-08-11T20:43:41+00:00 Simon Glass sjg@chromium.org 2019-08-01T15:46:47+00:00 168068fb3d7da3d95bf37b21f39347f48d38497f Move env_set_ulong() over to the new header file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
Move env_set_ulong() over to the new header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
dm: scsi: report correct device number 2019-02-19T13:55:43+00:00 Heinrich Schuchardt xypron.glpk@gmx.de 2019-02-05T17:06:24+00:00 90037d4c73ed704d85485d4fa68a618d4db2b12a Before the patch scsi would report the same device number for all SCSI devices, e.g. Device 0: (1:0) Vendor: ATA Prod.: Crucial_CT128M55 Rev: MU01 Type: Hard Disk Capacity: 122104.3 MB = 119.2 GB (250069680 x 512) Device 0: (1:0) Vendor: ATA Prod.: Rev: Type: Hard Disk Capacity: not available With the patch the same device number is reported as is used in scsi_read(): Device 0: (1:0) Vendor: ATA Prod.: Crucial_CT128M55 Rev: MU01 Type: Hard Disk Capacity: 122104.3 MB = 119.2 GB (250069680 x 512) Device 1: (1:0) Vendor: ATA Prod.: Rev: Type: Hard Disk Capacity: not available Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> 
Before the patch scsi would report the same device number for all SCSI
devices, e.g.

  Device 0: (1:0) Vendor: ATA Prod.: Crucial_CT128M55 Rev: MU01
            Type: Hard Disk
            Capacity: 122104.3 MB = 119.2 GB (250069680 x 512)
  Device 0: (1:0) Vendor: ATA Prod.:  Rev:
            Type: Hard Disk
            Capacity: not available

With the patch the same device number is reported as is used in
scsi_read():

  Device 0: (1:0) Vendor: ATA Prod.: Crucial_CT128M55 Rev: MU01
            Type: Hard Disk
            Capacity: 122104.3 MB = 119.2 GB (250069680 x 512)
  Device 1: (1:0) Vendor: ATA Prod.:  Rev:
            Type: Hard Disk
            Capacity: not available

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
blk: Call part_init() in the post_probe() method 2018-11-14T17:16:27+00:00 Bin Meng bmeng.cn@gmail.com 2018-10-15T09:21:07+00:00 d0851c8937067ad396f2bdafc46d0326bf3317db part_init() is currently called in every DM BLK driver, either in its bind() or probe() method. However we can use the BLK uclass driver's post_probe() method to do it automatically. Update all DM BLK drivers to adopt this change. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
part_init() is currently called in every DM BLK driver, either
in its bind() or probe() method. However we can use the BLK
uclass driver's post_probe() method to do it automatically.

Update all DM BLK drivers to adopt this change.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>