u-boot.git/drivers/serial/Kconfig, branch v2017.09-rc2

serial: sh: Convert to Kconfig

2017-08-02T19:26:24Z

Convert the SH Serial to Kconfig using tools/moveconfig.py tool and a bit of manual adjustment to cater for failed conversions. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu Signed-off-by: Nobuhiro Iwamatsu

serial: stm32x7: Convert CONFIG_STM32X7_SERIAL to Kconfig

2017-07-31T15:22:54Z

Add CONFIG_STM32X7_SERIAL as a Kconfig option. Signed-off-by: Patrice Chotard Reviewed-by: Vikas Manocha

serial: ns16550: Add RX interrupt buffer support

2017-07-23T21:04:46Z

Pasting longer lines into the U-Boot console prompt sometimes leads to characters missing. One problem here is the small 16-byte FIFO of the legacy NS16550 UART, e.g. on x86 platforms. This patch now introduces a Kconfig option to enable RX interrupt buffer support for NS16550 style UARTs. With this option enabled, I was able paste really long lines into the U-Boot console, without any characters missing. Signed-off-by: Stefan Roese Reviewed-by: Simon Glass Cc: Bin Meng [trini: Guard ns16550_serial_remove with CONFIG_IS_ENABLED(SERIAL_PRESENT) to match struct assignment] Signed-off-by: Tom Rini

serial: mxc: Add debug uart support

2017-07-12T07:44:22Z

Add support for the debug UART to assist with early debugging. Enable it for i.CoreM6 as an example. Signed-off-by: Jagan Teki Reviewed-by: Simon Glass

powerpc, 8xx: move Serial driver to drivers/serial/

2017-07-08T19:56:04Z

At the same time, move to Kconfig Signed-off-by: Christophe Leroy

serial, kconfig: fix menutext

2017-06-23T14:38:09Z

fix menutext for the options SPL_DM_SERIAL and TPL_DM_SERIAL. Both have the same text as DM_SERIAL, which is confusing. Signed-off-by: Heiko Schocher Reviewed-by: Stefan Roese

serial: omap: Support debug UART

2017-05-12T02:21:27Z

Add debug UART functions to permit omap specific ns16550 to provide an early debug UART. This is mostly in common with DEBUG_UART_NS16550 except for Mode definition register which is required for selecting UART mode(16x auto-baud or 13x mode). Signed-off-by: Lokesh Vutla Reviewed-by: Simon Glass Reviewed-by: Tom Rini

serial: add serial driver for BCM6345

2017-05-10T14:16:09Z

It is based on linux/drivers/tty/serial/bcm63xx_uart.c Signed-off-by: Álvaro Fernández Rojas Reviewed-by: Simon Glass

sunxi: fix the default value of CONS_INDEX on non-A23/A33 SUN8I

2017-04-25T09:44:21Z

Only A23/A33 in SUN8I want a default value of CONS_INDEX of 5, for other chips the default value is 1 like other Allwinner SoCs. Fix this default value. The original wrong value has lead to wrong console on H3 Orange Pi boards. Fixes: 7095f8641863 ("sunxi: Convert CONS_INDEX to Kconfig") Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard

sunxi: Convert CONS_INDEX to Kconfig

2017-04-20T11:20:32Z

Convert the CONS_INDEX configuration to Kconfig. Update sunxi's defconfigs to remove SYS_EXTRA_OPTIONS variable not needed anymore. Default value is 1 except for sun5i (equals 2) and sun8i (equals 5). Signed-off-by: Mylène Josserand [Maxime: Added a depends on ARCH_SUNXI to avoid build breakages] Signed-off-by: Maxime Ripard