u-boot.git/drivers/serial/altera_uart.c, branch v2015.07 Unnamed repository; edit this file 'description' to name the repository. nios2: divide nios2-io.h into each specific drivers and remove it 2014-08-30T09:48:43+00:00 Thomas Chou thomas@wytron.com.tw 2014-08-25T08:50:14+00:00 8645071006a0b577ae4660f4a271f42c081ef4ab The nios2-io.h defines hardware registers and bits of several FPGA IP cores. It could be divided in to the specific drivers, including altera timer, altera sysid, altera uart and altera jtag uart. The altera pio and altera spi drivers use their own hardware definitions. The removal of nios2-io.h will help modularity and maintenance. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> 
The nios2-io.h defines hardware registers and bits of several FPGA
IP cores. It could be divided in to the specific drivers, including
altera timer, altera sysid, altera uart and altera jtag uart. The
altera pio and altera spi drivers use their own hardware definitions.
The removal of nios2-io.h will help modularity and maintenance.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24T13:44:38+00:00 Wolfgang Denk wd@denx.de 2013-07-08T07:37:19+00:00 1a4596601fd395f3afb8f82f3f840c5e00bdd57a Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> 
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
serial: Use default_serial_puts() in drivers 2012-10-17T14:55:50+00:00 Marek Vasut marex@denx.de 2012-10-06T14:07:02+00:00 ec3fd68952662b1badb02caab9705eb93bdc4f1b Replace the in-place ad-hoc implementation of serial_puts() within the drivers with default_serial_puts() call. This cuts down on the code duplication quite a bit. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> 
Replace the in-place ad-hoc implementation of serial_puts() within
the drivers with default_serial_puts() call. This cuts down on the
code duplication quite a bit.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
serial: Remove CONFIG_SERIAL_MULTI from serial drivers 2012-10-15T18:53:58+00:00 Marek Vasut marex@denx.de 2012-09-14T21:44:09+00:00 a3827250606895ec2dd4b8d867342b7cabf3692f Remove the support for not-CONFIG_SERIAL_MULTI part from serial port drivers and some board files. Since CONFIG_SERIAL_MULTI is now enabled by default, that part is a dead code. Remove it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@ti.com> 
Remove the support for not-CONFIG_SERIAL_MULTI part from serial
port drivers and some board files. Since CONFIG_SERIAL_MULTI is
now enabled by default, that part is a dead code. Remove it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
serial: arm: Implement CONFIG_SERIAL_MULTI into altera serial driver 2012-10-15T18:53:54+00:00 Marek Vasut marex@denx.de 2012-09-13T14:49:51+00:00 b207d6455b123b08ad8d2d29dec76c6cd6fee87a Implement support for CONFIG_SERIAL_MULTI into altera serial driver. This driver was so far only usable directly, but this patch also adds support for the multi method. This allows using more than one serial driver alongside the altera driver. Also, add a weak implementation of default_serial_console() returning this driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Scott McNutt <smcnutt@psyent.com> 
Implement support for CONFIG_SERIAL_MULTI into altera serial driver.
This driver was so far only usable directly, but this patch also adds
support for the multi method. This allows using more than one serial
driver alongside the altera driver. Also, add a weak implementation
of default_serial_console() returning this driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Scott McNutt <smcnutt@psyent.com>
nios2: Fix outx/writex parameter order in io.h 2010-04-02T16:28:41+00:00 Scott McNutt smcnutt@psyent.com 2010-03-22T01:24:43+00:00 3ea0037f2337de692b5fd2b6a4449db1de3067a2 The outx/writex macros were using writex(addr, val) rather than the standard writex(val, addr), resulting in incompatibilty with architecture independent components. This change set uses standard parameter order. Signed-off-by: Scott McNutt <smcnutt@psyent.com> 
The outx/writex macros were using writex(addr, val) rather than
   the standard writex(val, addr), resulting in incompatibilty with
   architecture independent components. This change set uses standard
   parameter order.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>
nios2: Move serial drivers to individual files in drivers/serial 2010-04-02T16:28:40+00:00 Scott McNutt smcnutt@psyent.com 2010-03-19T23:03:28+00:00 c9d4f46b5d639a45747d5eaabd31d35856cb918f The standard Altera UART & JTAG UART as well as the OpenCores YANU driver are now in individual files in drivers/serial rather than a single file uner cpu/nios2. Signed-off-by: Scott McNutt <smcnutt@psyent.com> 
   The standard Altera UART & JTAG UART as well as the OpenCores
   YANU driver are now in individual files in drivers/serial
   rather than a single file uner cpu/nios2.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>