u-boot.git/drivers/serial/mcfuart.c, branch master

serial: mcfuart: renaming to a more appropriate name

2020-03-13T13:29:50+00:00

All drivers seems to align now to serial_xxx maning, so, aligning
also this driver, to allow to be found easily.

Signed-off-by: Angelo Durgehello

serial: mcfuart: fix uart port index

2020-03-13T13:28:17+00:00

Actually, using dev->seq value before probe to deduce the current
serial port index leads to reading an invalid seq value (-1).
So, getting dev->seq at probe time.

Signed-off-by: Angelo Durgehello

drivers: serial: mcfuart: add DT support

2019-05-24T12:11:58+00:00

This patch adds devicetree support to the mcfuart.c driver
and removes non DM code.

Reviewed-by: Simon Glass 
Signed-off-by: Angelo Dureghello

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

m68k: add DM model serial driver

2016-05-17T15:54:43+00:00

Boards can now use DM serial driver, or still legacy mcf uart
driver version.

Signed-off-by: Angelo Dureghello 
Acked-by: Simon Glass

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

ColdFire: uart: fix build failure for missing header files

2012-10-19T15:52:16+00:00

The following commit introduces some build failures for ColdFire
platform.

commit abaef69fbe683197607febeb2cc619490aca2a10
Author: Marek Vasut 
Date:   Thu Sep 13 16:51:38 2012 +0200

Add the missed header files.

Sign-off-by: Alison Wang

serial: Use default_serial_puts() in drivers

2012-10-17T14:55:50+00:00

Replace the in-place ad-hoc implementation of serial_puts() within
the drivers with default_serial_puts() call. This cuts down on the
code duplication quite a bit.

Signed-off-by: Marek Vasut 
Cc: Marek Vasut 
Cc: Tom Rini

serial: Remove CONFIG_SERIAL_MULTI from serial drivers

2012-10-15T18:53:58+00:00

Remove the support for not-CONFIG_SERIAL_MULTI part from serial
port drivers and some board files. Since CONFIG_SERIAL_MULTI is
now enabled by default, that part is a dead code. Remove it.

Signed-off-by: Marek Vasut 
Cc: Marek Vasut 
Cc: Anatolij Gustschin 
Cc: Stefan Roese 
Signed-off-by: Tom Rini

serial: mcf: Implement CONFIG_SERIAL_MULTI into MCF serial driver

2012-10-15T18:53:54+00:00

Implement support for CONFIG_SERIAL_MULTI into MCF serial driver.
This driver was so far only usable directly, but this patch also adds
support for the multi method. This allows using more than one serial
driver alongside the MCF driver. Also, add a weak implementation
of default_serial_console() returning this driver.

Signed-off-by: Marek Vasut 
Cc: Marek Vasut 
Cc: Tom Rini 
Cc: TsiChung Liew