<feed xmlns='http://www.w3.org/2005/Atom'>
<title>u-boot.git/drivers/serial/serial_mpc8xx.c, branch master</title>
<subtitle>Unnamed repository; edit this file 'description' to name the repository.
</subtitle>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/'/>
<entry>
<title>Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"</title>
<updated>2024-05-20T19:35:03+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2024-05-20T19:35:03+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=03de305ec48b0bb28554372abb40ccd46dbe0bf9'/>
<id>03de305ec48b0bb28554372abb40ccd46dbe0bf9</id>
<content type='text'>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman &lt;jonas@kwiboo.se&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman &lt;jonas@kwiboo.se&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""</title>
<updated>2024-05-19T14:16:36+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2024-05-19T02:20:43+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=d678a59d2d719da9e807495b4b021501f2836ca5'/>
<id>d678a59d2d719da9e807495b4b021501f2836ca5</id>
<content type='text'>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman &lt;jonas@kwiboo.se&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman &lt;jonas@kwiboo.se&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>serial: Remove &lt;common.h&gt; and add needed includes</title>
<updated>2024-05-07T14:00:56+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2024-05-02T01:31:17+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=a8604d0ce1c0b5de855c6a205f00360c93a6d197'/>
<id>a8604d0ce1c0b5de855c6a205f00360c93a6d197</id>
<content type='text'>
Remove &lt;common.h&gt; from this driver directory and when needed
add missing include files directly.

Reviewed-by: Peter Robinson &lt;pbrobinson@gmail.com&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Remove &lt;common.h&gt; from this driver directory and when needed
add missing include files directly.

Reviewed-by: Peter Robinson &lt;pbrobinson@gmail.com&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>serial, mpc8xx: Take parameter RAM relocation into account</title>
<updated>2023-05-05T05:26:53+00:00</updated>
<author>
<name>Christophe Leroy</name>
<email>christophe.leroy@csgroup.eu</email>
</author>
<published>2023-05-03T07:20:15+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=388cb1a10f091e494b837a8666d49866e9c7b1e2'/>
<id>388cb1a10f091e494b837a8666d49866e9c7b1e2</id>
<content type='text'>
Instead of inhibiting parameter RAM relacation, take
into account the configured one.

It means INIT_TRX command cannot be used and must be done
manually as explained in the microcode patch application note.

Signed-off-by: Christophe Leroy &lt;christophe.leroy@csgroup.eu&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Instead of inhibiting parameter RAM relacation, take
into account the configured one.

It means INIT_TRX command cannot be used and must be done
manually as explained in the microcode patch application note.

Signed-off-by: Christophe Leroy &lt;christophe.leroy@csgroup.eu&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>powerpc: mpc8xx: CPM parameter RAM can be anywhere</title>
<updated>2023-05-04T08:58:07+00:00</updated>
<author>
<name>Christophe Leroy</name>
<email>christophe.leroy@csgroup.eu</email>
</author>
<published>2023-05-03T08:31:19+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=fdd243d81bcf5e7fdc8cc7b5060c0c6ed60c5c81'/>
<id>fdd243d81bcf5e7fdc8cc7b5060c0c6ed60c5c81</id>
<content type='text'>
With relocation, CPM parameter RAM can be anywhere in the
dual port RAM, so don't split dual port RAM.

Remove dparam and dparam16 members of struct comm_proc

PROFF_XXX become offsets from the start of dual port RAM,
then they are now consistant with the offsets in RPBASE
registers.

Signed-off-by: Christophe Leroy &lt;christophe.leroy@csgroup.eu&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
With relocation, CPM parameter RAM can be anywhere in the
dual port RAM, so don't split dual port RAM.

Remove dparam and dparam16 members of struct comm_proc

PROFF_XXX become offsets from the start of dual port RAM,
then they are now consistant with the offsets in RPBASE
registers.

Signed-off-by: Christophe Leroy &lt;christophe.leroy@csgroup.eu&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>serial: Use -EAGAIN in getc and putc</title>
<updated>2023-01-02T21:01:40+00:00</updated>
<author>
<name>Pali Rohár</name>
<email>pali@kernel.org</email>
</author>
<published>2022-12-10T23:31:21+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=1138bbe05e617034cf542ac0bc13cfa804cb09f6'/>
<id>1138bbe05e617034cf542ac0bc13cfa804cb09f6</id>
<content type='text'>
U-Boot serial code already handles -EAGAIN value from getc and putc
callbacks. So change drivers code to return -EAGAIN when HW is busy instead
of doing its own busy loop and waiting until HW is ready.

Signed-off-by: Pali Rohár &lt;pali@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
U-Boot serial code already handles -EAGAIN value from getc and putc
callbacks. So change drivers code to return -EAGAIN when HW is busy instead
of doing its own busy loop and waiting until HW is ready.

Signed-off-by: Pali Rohár &lt;pali@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>serial: Do not write additional \r before \n for dm_serial drivers</title>
<updated>2023-01-02T21:01:40+00:00</updated>
<author>
<name>Pali Rohár</name>
<email>pali@kernel.org</email>
</author>
<published>2022-12-10T23:27:44+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=59440d83d38bfed31931d11aa06a3fb56acbd2f0'/>
<id>59440d83d38bfed31931d11aa06a3fb56acbd2f0</id>
<content type='text'>
serial-uclass.c code already puts \r before \n for all dm_serial drivers.

Signed-off-by: Pali Rohár &lt;pali@kernel.org&gt;
Reviewed-by: Stefan Roese &lt;sr@denx.de&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
serial-uclass.c code already puts \r before \n for all dm_serial drivers.

Signed-off-by: Pali Rohár &lt;pali@kernel.org&gt;
Reviewed-by: Stefan Roese &lt;sr@denx.de&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>cyclic: Use schedule() instead of WATCHDOG_RESET()</title>
<updated>2022-09-18T08:26:33+00:00</updated>
<author>
<name>Stefan Roese</name>
<email>sr@denx.de</email>
</author>
<published>2022-09-02T12:10:46+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=29caf9305b6fafe8f6d6b18fa1f825dff8686e61'/>
<id>29caf9305b6fafe8f6d6b18fa1f825dff8686e61</id>
<content type='text'>
Globally replace all occurances of WATCHDOG_RESET() with schedule(),
which handles the HW_WATCHDOG functionality and the cyclic
infrastructure.

Signed-off-by: Stefan Roese &lt;sr@denx.de&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
Tested-by: Tom Rini &lt;trini@konsulko.com&gt; [am335x_evm, mx6cuboxi, rpi_3,dra7xx_evm, pine64_plus, am65x_evm, j721e_evm]
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Globally replace all occurances of WATCHDOG_RESET() with schedule(),
which handles the HW_WATCHDOG functionality and the cyclic
infrastructure.

Signed-off-by: Stefan Roese &lt;sr@denx.de&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
Tested-by: Tom Rini &lt;trini@konsulko.com&gt; [am335x_evm, mx6cuboxi, rpi_3,dra7xx_evm, pine64_plus, am65x_evm, j721e_evm]
</pre>
</div>
</content>
</entry>
<entry>
<title>common: Drop asm/global_data.h from common header</title>
<updated>2021-02-02T20:33:42+00:00</updated>
<author>
<name>Simon Glass</name>
<email>sjg@chromium.org</email>
</author>
<published>2020-10-31T03:38:53+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=401d1c4f5d2d29c4bc4beaec95402ca23eb63295'/>
<id>401d1c4f5d2d29c4bc4beaec95402ca23eb63295</id>
<content type='text'>
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include &lt;asm/global_data.h&gt; at all, so
remove that include.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include &lt;asm/global_data.h&gt; at all, so
remove that include.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>drivers: serial: get rid of non DM mpc8xx driver</title>
<updated>2018-12-03T15:44:10+00:00</updated>
<author>
<name>Christophe Leroy</name>
<email>christophe.leroy@c-s.fr</email>
</author>
<published>2018-11-21T08:51:53+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=42b54013a08dbda78b466243f03ced249a7fbe84'/>
<id>42b54013a08dbda78b466243f03ced249a7fbe84</id>
<content type='text'>
Signed-off-by: Christophe Leroy &lt;christophe.leroy@c-s.fr&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Christophe Leroy &lt;christophe.leroy@c-s.fr&gt;
</pre>
</div>
</content>
</entry>
</feed>
