u-boot.git/drivers/serial, branch v2016.07-rc1

Merge http://git.denx.de/u-boot-samsung

2016-06-06T17:39:43+00:00

Signed-off-by: Tom Rini 

Conflicts:
	configs/peach-pi_defconfig
	configs/peach-pit_defconfig

serial: 16550: Drop OMAP1510 support

2016-06-03T01:21:41+00:00

The CONFIG_OMAP1510 is no longer defined, so remove this dead code.

Signed-off-by: Marek Vasut 
Cc: Tom Rini 
Cc: Simon Glass 
Reviewed-by: Simon Glass 
Acked-by: Nishanth Menon

serial: 16550: Make serial_io/out_shift available to debug mode

2016-06-03T01:21:41+00:00

The ns16550 driver needs serial_in_shift() and serial_out_shift()
when compiled in debug UART mode, so shift the DM_SERIAL check a
little to make these functions available.

Signed-off-by: Marek Vasut 
Cc: Tom Rini 
Cc: Simon Glass 
Reviewed-by: Tom Rini 
Reviewed-by: Simon Glass

arm: add initial support for Amlogic Meson and ODROID-C2

2016-05-27T19:39:47+00:00

This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a
board definition for ODROID-C2. This initial submission only supports
UART and Ethernet (through the existing Designware driver). DTS files
are the ones submitted to Linux arm-soc for 4.7 [1].

[1] https://patchwork.ozlabs.org/patch/603583/

Signed-off-by: Beniamino Galvani 
Reviewed-by: Simon Glass

dm: ns16550: Don't map_physmem for I/O ports

2016-05-25T23:34:13+00:00

If the UART is to be accessed using I/O port accessors (inb & outb) then
using map_physmem doesn't make sense, since it operates in a different
memory space. Remove the call to map_physmem when
CONFIG_SYS_NS16550_PORT_MAPPED is defined, allowing I/O port addresses
to not be mangled by the incorrect mapping.

Signed-off-by: Paul Burton 
Signed-off-by: Daniel Schwierzeck

serial: s5p: use clock api to get clock rate

2016-05-25T01:00:19+00:00

On Exynos platforms that support clock driver API, allow the driver to
use clock api get the SCLK clock rate.

Cc: Minkyu Kang 
Signed-off-by: Thomas Abraham 
Reviewed-by: Simon Glass 
Signed-off-by: Minkyu Kang

serial: s5p: get the port id number from the alias of the device node

2016-05-25T01:00:19+00:00

The port id, if not specified in the device node, can be obtained from
the alias of the device node listed in the aliases node.

Cc: Minkyu Kang 
Signed-off-by: Thomas Abraham 
Reviewed-by: Simon Glass 
Signed-off-by: Minkyu Kang

ar933x: serial: Remove the explicit pinctrl setting

2016-05-20T23:36:38+00:00

The correct pinctrl is handled automatically so we don't need to do it in
the driver.

Signed-off-by: Wills Wang

drivers: serial: add serial driver for ar933x SOC

2016-05-20T23:25:50+00:00

This patch add support for ar933x serial.

Signed-off-by: Wills Wang 
Reviewed-by: Thomas Chou 
Reviewed-by: Daniel Schwierzeck 
Reviewed-by: Simon Glass

m68k: add DM model serial driver

2016-05-17T15:54:43+00:00

Boards can now use DM serial driver, or still legacy mcf uart
driver version.

Signed-off-by: Angelo Dureghello 
Acked-by: Simon Glass