u-boot.git/drivers/spi/Makefile, branch v2018.09

arm: sunxi: Allwinner A10 SPI driver

2018-08-03T05:44:08Z

Add spi driver for sun4i, sun5i and sun7i SoCs. The driver is adapted from mailine kernel. Signed-off-by: Stefan Mavrodiev Reviewed-by: Jagan Teki

spi: zynqmp_gqspi: Add support for ZynqMP qspi driver

2018-07-16T08:31:47Z

This patch adds qspi driver support for ZynqMP SoC. This driver is responsible for communicating with qspi flash devices. Signed-off-by: Siva Durga Prasad Paladugu [jagan: removed GQSPI_MIO_NUM_ macros] Reviewed-by: Jagan Teki

board: arm: Add support for Broadcom BCM7445

2018-07-10T20:55:57Z

Add support for loading U-Boot on the Broadcom 7445 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons Cc: Stefan Roese Cc: Tom Rini Cc: Florian Fainelli

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

mtd: spi: Add Renesas RPC SPI-flash driver

2018-04-11T21:12:01Z

Add driver for the RPC block in SPI-flash mode. This driver allows access to a SPI NOR flash attached to the RPC block and does not support RPC in Hyperflash mode. Note that this block is extremely selective when communicating with the SPI NOR. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu

dm: spi: add BCM63xx HSSPI driver

2018-01-24T06:34:06Z

This driver is a simplified version of linux/drivers/spi/spi-bcm63xx-hsspi.c Signed-off-by: Álvaro Fernández Rojas Reviewed-by: Simon Glass Reviewed-by: Daniel Schwierzeck Reviewed-by: Jagan Teki

dm: spi: add BCM63xx SPI driver

2018-01-24T06:33:43Z

This driver is a simplified version of linux/drivers/spi/spi-bcm63xx.c Signed-off-by: Álvaro Fernández Rojas Reviewed-by: Simon Glass Reviewed-by: Daniel Schwierzeck Reviewed-by: Jagan Teki

spi: nds_ae3xx: Rename nds_ae3xx_spi as atcspi200_spi

2017-11-30T01:44:09Z

atcspi200 is Andestech spi ip which is embedded in AE3XX and AE250 platforms. So rename as atcspi200 will be more reasonable to be used in different platforms. Signed-off-by: Rick Chen

spi: Drop CONFIG_ATMEL_DATAFLASH_SPI

2017-10-16T13:42:51Z

Last user of this option went away in commit: fdc7718999 ("board: usb_a9263: Update to support DT and DM") Signed-off-by: Tuomas Tynkkynen Acked-by: Wenyou Yang

nds32: spi: Support spi dm driver.

2017-09-21T02:30:22Z

Support spi driver and can detect MX25U1635E flash on AE3XX board. Verification: sf probe 0:0 50000000 0 spi_flash_std_probe(sf_Probr.c) spi_flash_probe_slave(sf_Probr.c) SF: Detected mx25u1635e with page size 256 Bytes, erase size 4 KiB, total 2 MiB NDS32 # sf test 0x100000 0x1000 SPI flash test: 0 erase: 34 ticks, 117 KiB/s 0.936 Mbps 1 check: 15 ticks, 266 KiB/s 2.128 Mbps 2 write: 21 ticks, 190 KiB/s 1.520 Mbps 3 read: 11 ticks, 363 KiB/s 2.904 Mbps Test passed 0 erase: 34 ticks, 117 KiB/s 0.936 Mbps 1 check: 15 ticks, 266 KiB/s 2.128 Mbps 2 write: 21 ticks, 190 KiB/s 1.520 Mbps 3 read: 11 ticks, 363 KiB/s 2.904 Mbps Signed-off-by: rick