u-boot.git/drivers/spi, branch v2016.01 Unnamed repository; edit this file 'description' to name the repository. spi: fsl_qspi: fix an error of using GENMASK 2016-01-07T14:59:33+00:00 Gong Qianyu Qianyu.Gong@freescale.com 2015-12-14T10:26:25+00:00 8770413f380d07439bc9ad60c6b4d108d5a9adf0 This commit fixes the change of below commit "spi: fsl_qspi: Use GENMASK" (sha1 :bad490a24212c068c5b718b9189f47ea4075d078) Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: Jagan Teki <jteki@openedev.com> 
This commit fixes the change of below commit
"spi: fsl_qspi: Use GENMASK"
(sha1 :bad490a24212c068c5b718b9189f47ea4075d078)

Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
spi: zynq_qspi: Add configuration to disable LQSPI feature 2015-12-18T12:15:57+00:00 Nathan Rossi nathan@nathanrossi.com 2015-12-08T14:44:40+00:00 04a44d367168da8e12cfe23bf65dfff2e01bc4a4 When the Zynq Boot ROM code loads the payload from QSPI it uses the LQSPI feature of the QSPI device, however it does not clean up its configuration before handing over to the payload which leaves the device confgured to by-pass the standard non-linear operating mode. This ensures the Linear QSPI mode is disabled before re-enabling the device. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Cc: Jagan Teki <jteki@openedev.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
When the Zynq Boot ROM code loads the payload from QSPI it uses the
LQSPI feature of the QSPI device, however it does not clean up its
configuration before handing over to the payload which leaves the device
confgured to by-pass the standard non-linear operating mode.

This ensures the Linear QSPI mode is disabled before re-enabling the
device.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Cc: Jagan Teki <jteki@openedev.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
fsl_qspi: Pet the watchdog while reading/writing 2015-12-15T00:57:33+00:00 Alexander Stein alexander.stein@systec-electronic.com 2015-11-04T08:19:10+00:00 beedbc2ea0e71c779b92e4d74b928a266d3e86f9 When reading a large blob. e.g. a linux kernel (several MiBs) a watchdog timeout might occur meanwhile. So pet the watchdog while operating on the flash. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Reviewed-by: York Sun <yorksun@freescale.com> 
When reading a large blob. e.g. a linux kernel (several MiBs) a watchdog
timeout might occur meanwhile. So pet the watchdog while operating on
the flash.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Reviewed-by: York Sun <yorksun@freescale.com>
spi: xilinx: Add new compatible strings 2015-12-11T16:42:24+00:00 Michal Simek michal.simek@xilinx.com 2015-12-11T11:41:14+00:00 76de51a6da0411e1f3e80e1c9a2ef5bfa8e35571 Add xlnx,xps-spi-2.00.a/b which is compatible string listed in the Linux kernel. Remove origin one which has no real background. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com> 
Add xlnx,xps-spi-2.00.a/b which is compatible string
listed in the Linux kernel.
Remove origin one which has no real background.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
spi: Kconfig: Fix correct target name for ZynqMP 2015-12-11T16:42:23+00:00 Michal Simek michal.simek@xilinx.com 2015-12-07T10:33:58+00:00 8e4920e53e1a45658743d79d6fa29a1b44448622 ZynqMP is using different symbol. Use correct one. Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
ZynqMP is using different symbol.
Use correct one.

Reviewed-by: Jagan Teki <jteki@openedev.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
spi: zynq_spi: Add cadence compatible string 2015-12-11T16:42:23+00:00 Michal Simek michal.simek@xilinx.com 2015-12-07T12:06:54+00:00 23ef5aea849ce2252086a4f79dde8205afc56a00 Extend compatible list table for cdns,spi-r1p6 compatible string. Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
Extend compatible list table for cdns,spi-r1p6 compatible string.

Reviewed-by: Jagan Teki <jteki@openedev.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
spi: ti_qspi: Fix SPI_3WIRE checking using mode 2015-12-11T16:42:23+00:00 Jagan Teki jteki@openedev.com 2015-12-03T16:55:20+00:00 cd337da21ecea0f34335d3b2d33bcd28d9e3d0d0 SPI_3WIRE is spi mode not spi flags, so this patch fixed the spi-3wire checking throgh mode instead of flags. Cc: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com> 
SPI_3WIRE is spi mode not spi flags, so this patch fixed
the spi-3wire checking throgh mode instead of flags.

Cc: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jagan Teki <jteki@openedev.com>
spi: Get spi-3wire from dts 2015-12-11T16:42:23+00:00 Jagan Teki jteki@openedev.com 2015-12-03T16:49:05+00:00 379b49d82ee3304b55ece1f32d95fbeef9e0176a spi-3wire is used when SI/SO signals shared so get the same from dts node and assign to mode on slave plat->mode. Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com> 
spi-3wire is used when SI/SO signals shared so get
the same from dts node and assign to mode on slave
plat->mode.

Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jagan Teki <jteki@openedev.com>
Move console definitions into a new console.h file 2015-11-20T03:27:50+00:00 Simon Glass sjg@chromium.org 2015-11-09T06:47:45+00:00 24b852a7a2b8eca71789100983bdb5104cc00696 The console includes a global variable and several functions that are only used by a small subset of U-Boot files. Before adding more functions, move the definitions into their own header file. Signed-off-by: Simon Glass <sjg@chromium.org> 
The console includes a global variable and several functions that are only
used by a small subset of U-Boot files. Before adding more functions, move
the definitions into their own header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Merge branch 'master' of git://git.denx.de/u-boot-spi 2015-11-19T18:27:26+00:00 Tom Rini trini@konsulko.com 2015-11-19T18:27:26+00:00 9ef671c9d4c70af3f8b21d8a31a89af4dc74d6b3