The U_BOOT_DRIVER macro creates a list of drivers used at link time, and
all entries here must be unique. This in turn means that all entries in
the code should also be unique in order to not lead to build failures
later with unexpected build combinations. Typically, the problem we have
here is when a driver is obviously based on another driver and didn't
update this particular field and so while the name field reflects
something unique the linker entry itself is not. In a few places this
provides a more suitable string name as well, however.

Reviewed-by: Marek Vasut <marek.vasut+usb@mailbox.org>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com> # Tegra
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

TARGET namespace is for machines / boards / what-have-you that
building U-Boot for. Simply replace from TARGET to ARCH
make things more clear and proper for ALL SoCFPGA.

Signed-off-by: Brian Sune <briansune@gmail.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>

# Conflicts:
#	drivers/ddr/altera/Makefile

Introduce a new sysreset driver for the QEMU Virtual System Controller.
This device is found on QEMU "virt" machines (such as the m68k virt
target) and provides a mechanism to trigger system reset and power-off
events.

The driver maps U-Boot sysreset types to the corresponding controller
commands:
- SYSRESET_WARM / SYSRESET_COLD -> VIRT_CTRL_CMD_RESET
- SYSRESET_POWER_OFF -> VIRT_CTRL_CMD_HALT

Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Simon Glass <simon.glass@canonical.com>

The MPC83xx sysreset driver cannot build without access to some
architecture specific header files. Express that requirements in Kconfig
as well.

Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

Put all slave CPUs (CPU1-3) into WFI mode. Master CPU (CPU0) writes
the magic word into system manager's scratch register to indicate
the system has performed L2 reset and request reset manager to
perform hardware handshake and then trigger L2 reset. CPU0 put
itself into WFI mode. L2 reset will reboot all HPS CPU cores after
which all HPS cores are in WFI mode. L2 reset is followed by warm
reset request by SPL via RMR_EL3 system register.

Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>

SYSRESET_PSCI should select SPL_ARM_PSCI_FW only when SPL_SYSRESET is
enabled/required. This change saves 1.6kB on Xilinx ZynqMP Kria platform.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

MAX8907 PMIC has embedded poweroff function used by some device to initiane
device power off. Implement it as optional sysreset driver guarded by
kconfig option and system-power-controller device tree property.

Tested-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>

GPIO reset and power-off functionality depends on device tree data, which
is often absent in SPL or TPL. To address this, incorporate PHASE_ into the
config option and add Kconfig option or each phase.

Adjust SYSRESET_GPIO and POWEROFF_GPIO uses to address possible
regressions.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>

Depending on ARCH_IPQ40XX is too restrictive, as this architecture is
explicitly armv7. This driver is also used on msm8916 devices, which
have cortex-a53 armv8 cores.

Signed-off-by: Sam Day <me@samcday.com>
Link: https://lore.kernel.org/r/20250125-msm8916-sysreset-v1-2-62073932ff0e@samcday.com
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>

Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.

Update the comment in bootstage to refer to this symbol, instead of
SPL_

Signed-off-by: Simon Glass <sjg@chromium.org>