Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.

Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal <anshuld@ti.com> #TI boards
Acked-by: Yao Zi <me@ziyao.cc> #TH1520
Signed-off-by: Peng Fan <peng.fan@nxp.com>

NXP i.MX SoCs are available in different temperature grades. By default,
device-tree contains only thermal trips for consumer grade parts. On the
other hand, part temp grade fuse can be used to determine thermal trip
points. We already do this in imx_tmu_bind() function. Now, factor out
this functionality to a standalone function imx_tmu_set_trips() and use
it for both cases. This fixes an issue where 'cpu-thermal' child device
would set different thermal trips than the parent 'tmu@44482000' sensor,
depending on which gets used.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>

Linux kernel .get_temp() callback reports values in millicelsius,
U-Boot currently reports them in celsius. Align the two and report
in millicelsius. Update drivers accordingly. Update callsites that
use thermal_get_temp() as well.

The 'temperature' command now reports temperature in millicelsius
as well, with additional accuracy. This changes command line ABI
slightly.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: David Zang <davidzangcs@gmail.com>
[trini: Update test/cmd/temperature.c]
Signed-off-by: Tom Rini <trini@konsulko.com>

Add support for R-Car Gen3/Gen4 and RZ/G2 thermal sensors.
Fuse readout support is present, including fallback trimming.

Example usage using the 'temperature' command on R-Car V4H Sparrow Hawk:

"
=> temperature list
| Device                        | Driver                        | Parent
| thermal-rcar-gen3-tsc.0       | thermal-rcar-gen3-tsc         | thermal@e6198000
| thermal-rcar-gen3-tsc.1       | thermal-rcar-gen3-tsc         | thermal@e6198000
| thermal-rcar-gen3-tsc.2       | thermal-rcar-gen3-tsc         | thermal@e6198000
| thermal-rcar-gen3-tsc.3       | thermal-rcar-gen3-tsc         | thermal@e6198000

=> for i in 0 1 2 3 ; do temperature get thermal-rcar-gen3-tsc.$i ; done
thermal-rcar-gen3-tsc.0: 56 C
thermal-rcar-gen3-tsc.1: 50 C
thermal-rcar-gen3-tsc.2: 48 C
thermal-rcar-gen3-tsc.3: 52 C
"

Ported from Linux 6.16-rc6 commit
9e1dc0360fcf ("thermal/drivers/rcar_gen3: Add support for R-Car V4H default trim values")

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

All instances of the U_BOOT_DRIVER must use a unique name or they will
lead to link time failures due to name space conflicts when both are
present. In this case the driver was reusing the ti_bandgap name.

Signed-off-by: Tom Rini <trini@konsulko.com>

Make sandbox_thermal_get_temp() static, since this is not called
outside of the driver. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

Sort the Makefile alphabetically. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

Drop all duplicate newlines. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>