u-boot.git/drivers/timer/Kconfig, branch v2017.11

driver: timer: Add the Atmel PIT timer driver

2017-08-26T18:56:08+00:00

Add the new Atmel PIT timer driver, which supports the driver model
and device tree.

Signed-off-by: Wenyou Yang

rockchip: timer: add device-model timer driver for RK3368 (and similar)

2017-08-13T15:12:36+00:00

This adds a device-model driver for the timer block in the RK3368 (and
similar devices that share the same timer block, such as the RK3288) for
the down-counting (i.e. non-secure) timers.

This allows us to configure U-Boot for the RK3368 in such a way that
we can run with the secure timer inaccessible or uninitialised (note
that the ARMv8 generic timer does not count, if the secure timer is
not enabled).

Signed-off-by: Philipp Tomsich 
Reviewed-by: Simon Glass

dm: timer: normalise SPL and TPL support

2017-08-13T15:12:36+00:00

To fully support DM timer in SPL and TPL, we need a few things cleaned
up and normalised:
- inclusion of the uclass and drivers should be an all-or-nothing
  decision for each stage and under control of $(SPL_TPL_)TIMER
  instead of having the two-level configuration with TIMER and
  $(SPL_TPL_)TIMER_SUPPORT
- when $(SPL_TPL_)TIMER is enabled, the ARMv8 generic timer code can
  not be compiled in

This normalises configuration to $(SPL_TPL_)TIMER and moves the config
options to drivers/timer/Kconfig (and cleans up the collateral damage
to some defconfigs that had SPL_TIMER_SUPPORT enabled).

Signed-off-by: Philipp Tomsich 
Reviewed-by: Simon Glass

x86: kconfig: Select TIMER and X86_TSC_TIMER

2017-08-01T12:17:02+00:00

Without a timer, U-Boot just doesn't boot. This is not something
we can turn off.

Signed-off-by: Bin Meng 
Reviewed-by: Andy Shevchenko 
Reviewed-by: Simon Glass

nds32: Support AE3XX platform.

2017-05-22T06:05:46+00:00

Support Andestech AE3xx platform: serial, timer device tree flow.

Signed-off-by: rick

nds32: Support AG101P timer DM.

2017-05-22T06:05:40+00:00

Support AG101P timer device tree flow.

Signed-off-by: rick

drivers: timer: Introduce ARC timer driver

2017-03-24T11:20:55+00:00

This commit introduces timer driver for ARC.

ARC timers are configured via ARC AUX registers so we use special
functions to access timer control registers.

This driver allows utilization of either timer0 or timer1
depending on which one is available in real hardware. Essentially
only existing timers should be mentioned in board's Device Tree
description.

Signed-off-by: Vlad Zakharov 
Reviewed-by: Simon Glass

STiH410: Add STi timer driver

2017-03-15T00:40:18+00:00

Add ARM global timer based timer

Signed-off-by: Patrice Chotard 
Reviewed-by: Simon Glass

aspeed: Add drivers common to all Aspeed SoCs

2017-01-28T19:04:27+00:00

Add support for Watchdog Timer, which is compatible with AST2400 and
AST2500 watchdogs. There is no uclass for Watchdog yet, so the driver
does not follow the driver model. It also uses fixed clock, so no clock
driver is needed.

Add support for timer for Aspeed ast2400/ast2500 devices.
The driver actually controls several devices, but because all devices
share the same Control Register, it is somewhat difficult to completely
decouple them. Since only one timer is needed at the moment, this should
be OK. The timer uses fixed clock, so does not rely on a clock driver.

Add sysreset driver, which uses watchdog timer to do resets and particular
watchdog device to use is hardcoded (0)
Reviewed-by: Simon Glass

timer: Provide an early timer

2016-02-26T15:53:10+00:00

In some cases the timer must be accessible before driver model is active.
Examples include when using CONFIG_TRACE to trace U-Boot's execution before
driver model is set up. Enable this option to use an early timer. These
functions must be supported by your timer driver: timer_early_get_count()
and timer_early_get_rate().

Signed-off-by: Simon Glass