u-boot.git/drivers/timer, branch v2022.10-rc5 Unnamed repository; edit this file 'description' to name the repository. timer: orion-timer: Use timer_conv_64() to fix timer wrap around 2022-09-18T10:41:57+00:00 Stefan Roese sr@denx.de 2022-09-15T14:20:36+00:00 5996a8a8356c11c6eb504eeea93c267f9adbf53c While testing on some Kirkwood platforms it was noticed that the timer did not function correctly all the time. The driver did not correctly handle 32bit timer value wrap arounds. Using the timer_conv_64() conversion function fixes this issue. Fixes: e9e73d78a8fb ("timer: add orion-timer support") Suggested-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier-oss@weidmueller.com> Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: Tony Dinh <mibodhi@gmail.com> 
While testing on some Kirkwood platforms it was noticed that the timer
did not function correctly all the time. The driver did not correctly
handle 32bit timer value wrap arounds. Using the timer_conv_64()
conversion function fixes this issue.

Fixes: e9e73d78a8fb ("timer: add orion-timer support")
Suggested-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier-oss@weidmueller.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Tested-by: Tony Dinh <mibodhi@gmail.com>
timer: add orion-timer support 2022-08-23T10:39:00+00:00 Michael Walle michael@walle.cc 2022-08-17T19:37:51+00:00 e9e73d78a8fb5566fdb306482945f6c9ff45c2a9 Add timer support for Kirkwood and MVEBU devices. Cc: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> 
Add timer support for Kirkwood and MVEBU devices.

Cc: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Merge tag 'xilinx-for-v2022.10' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next 2022-06-27T14:15:50+00:00 Tom Rini trini@konsulko.com 2022-06-27T14:15:50+00:00 c316ee674f25b73285f241ce922307296616a92a Xilinx changes for v2022.10 cpu: - Add driver for microblaze cpu net: - Add support for DM_ETH_PHY to AXI emac and emaclite xilinx: - Switch platforms to DM_ETH_PHY - DT chagnes in ZynqMP and Zynq - Enable support for SquashFS zynqmp: - Add support for KR260 boards - Move BSS from address 0 - Move platform identification from board code to soc driver - Improve zynqmp_psu_init_minimize versal: - Enable loading app at EL1 serial: - Setup default address and clock rates for DEBUG uarts pinctrl: - Add support for tri state and output enable properties relocate-rela: - Clean relocate-rela implementation for ARM64 - Add support for Microblaze microblaze: - Add support for runtime relocation - Rework cache handling (wiring, Kconfig) based on cpuinfo - Remove interrupt support timer: - Extract axi timer driver from Microblaze to generic location 
Xilinx changes for v2022.10

cpu:
- Add driver for microblaze cpu

net:
- Add support for DM_ETH_PHY to AXI emac and emaclite

xilinx:
- Switch platforms to DM_ETH_PHY
- DT chagnes in ZynqMP and Zynq
- Enable support for SquashFS

zynqmp:
- Add support for KR260 boards
- Move BSS from address 0
- Move platform identification from board code to soc driver
- Improve zynqmp_psu_init_minimize

versal:
- Enable loading app at EL1

serial:
- Setup default address and clock rates for DEBUG uarts

pinctrl:
- Add support for tri state and output enable properties

relocate-rela:
- Clean relocate-rela implementation for ARM64
- Add support for Microblaze

microblaze:
- Add support for runtime relocation
- Rework cache handling (wiring, Kconfig) based on cpuinfo
- Remove interrupt support

timer:
- Extract axi timer driver from Microblaze to generic location
timer: Add SPL_REGMAP dependency for Xilinx timer 2022-06-27T07:03:54+00:00 Michal Simek michal.simek@amd.com 2022-06-23T11:08:30+00:00 728a86edb63a647e6faf211c0dbc7bd0e4ff7ac6 Add SPL_REGMAP dependency when SPL is enabled. This can avoid compilation issues if timer is selected but SPL_REGMAP not. Reported-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/8f6c187e04cb3127bf5148ae2dbbdf55b25ea544.1655982509.git.michal.simek@amd.com 
Add SPL_REGMAP dependency when SPL is enabled. This can avoid compilation
issues if timer is selected but SPL_REGMAP not.

Reported-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/8f6c187e04cb3127bf5148ae2dbbdf55b25ea544.1655982509.git.michal.simek@amd.com
microblaze: Convert axi timer to DM driver 2022-06-24T12:16:32+00:00 Michal Simek michal.simek@amd.com 2022-06-24T12:16:32+00:00 a36d86720f23a6dd503073a82905002b88c8e363 Move axi timer driver from Microblaze to generic location. Origin implementation was irq based with counting down timer. CONFIG_TIMER drivers are designed differently that timer is free running up timer with automatic reload without any interrupt. Information about clock rates are find out in timer_pre_probe() that's why there is no need to get any additional information from DT in the driver itself (only register offset). Signed-off-by: Michal Simek <michal.simek@amd.com> Tested-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/6c12fc86bbc1f17d05c25018862e7b7b03346b36.1654684731.git.michal.simek@amd.com 
Move axi timer driver from Microblaze to generic location.
Origin implementation was irq based with counting down timer.

CONFIG_TIMER drivers are designed differently that timer is free running up
timer with automatic reload without any interrupt.
Information about clock rates are find out in timer_pre_probe() that's why
there is no need to get any additional information from DT in the driver
itself (only register offset).

Signed-off-by: Michal Simek <michal.simek@amd.com>
Tested-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Link: https://lore.kernel.org/r/6c12fc86bbc1f17d05c25018862e7b7b03346b36.1654684731.git.michal.simek@amd.com
timer: gxp: Add HPE GXP timer support 2022-06-23T01:30:04+00:00 Nick Hawkins nick.hawkins@hpe.com 2022-06-08T21:21:35+00:00 b25913b40ee138c35d4c92e55898a365348d5769 Add support for the HPE GXP SOC timer. The GXP supports several different kinds of timers but for the purpose of this driver there is only support for the General Timer. The timer has a 1us resolution and is 56 bits. Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com> 
Add support for the HPE GXP SOC timer. The GXP supports several different
kinds of timers but for the purpose of this driver there is only support
for the General Timer. The timer has a 1us resolution and is 56 bits.

Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
arm: omap2plus: Move CONFIG_SYS_PTV out of CONFIG namespace 2022-06-06T16:09:00+00:00 Tom Rini trini@konsulko.com 2022-05-12T21:22:26+00:00 12f613cf0e823b278917faf58643383bf309e668 This is always defined to 2, and referenced in two places. Move the define to <asm/omap_common.h> and make sure the code that uses this includes that file. Make <asm/arch-omap*/clock.h> not include that file, as we don't need to be doing so. Signed-off-by: Tom Rini <trini@konsulko.com> 
This is always defined to 2, and referenced in two places.  Move the
define to <asm/omap_common.h> and make sure the code that uses this
includes that file.  Make <asm/arch-omap*/clock.h> not include that
file, as we don't need to be doing so.

Signed-off-by: Tom Rini <trini@konsulko.com>
timer: npcm: Add NPCM timer support 2022-05-05T13:28:47+00:00 Jim Liu jim.t90615@gmail.com 2022-04-19T05:32:22+00:00 b789e4f215614e3aee2f78925683dc722ca617fc Add Nuvoton BMC NPCM7xx/NPCM8xx timer driver. Signed-off-by: Jim Liu <JJLIU0@nuvoton.com> Signed-off-by: Stanley Chu <yschu@nuvoton.com> 
Add Nuvoton BMC NPCM7xx/NPCM8xx timer driver.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
vpl: Add Kconfig options for VPL 2022-05-02T13:58:13+00:00 Simon Glass sjg@chromium.org 2022-04-30T06:56:53+00:00 747093dd4089bdb2eccae90d7bccf33198e78eaa Add VPL versions of commonly used Kconfig options. Signed-off-by: Simon Glass <sjg@chromium.org> 
Add VPL versions of commonly used Kconfig options.

Signed-off-by: Simon Glass <sjg@chromium.org>
timers: atmel_pit: introduce CONFIG_SPL_ATMEL_PIT_TIMER 2022-04-26T06:54:41+00:00 Eugen Hristev eugen.hristev@microchip.com 2022-04-04T08:35:51+00:00 632422d4b333f3580b9fd28c424ff728ed3d3bad This commit allows the ATMEL_PIT_TIMER driver to be unselected in SPL and be selected in u-boot proper. The SPL can use a different timer. By having a separate Kconfig for ATMEL_TCB in SPL, the size of the SPL decreases by 0.3 KBytes. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> 
This commit allows the ATMEL_PIT_TIMER driver to be unselected in SPL and be
selected in u-boot proper. The SPL can use a different timer.
By having a separate Kconfig for ATMEL_TCB in SPL, the size of the SPL
decreases by 0.3 KBytes.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>