u-boot.git/drivers/timer, branch v2024.10-rc2 Unnamed repository; edit this file 'description' to name the repository. drivers: timer: Remove duplicate newlines 2024-07-22T16:53:06+00:00 Marek Vasut marek.vasut+renesas@mailbox.org 2024-07-20T12:41:01+00:00 6478e02b2a5734d22e0137139eb30964a7a57798 Drop all duplicate newlines. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> 
Drop all duplicate newlines. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
timer: mtk: skip setting parent with dummy fixed-clock 2024-07-18T13:40:30+00:00 Christian Marangi ansuelsmth@gmail.com 2024-07-06T16:13:02+00:00 0f02269b76bc25a7c9332ae8630ba407cb62f9ec Skip setting parent with dummy fixed-clock. Upstream linux might declare an additional clock for the mtk timer and that additional clock might also be a fixed-clock defined in DT. Setting parent of a dummy fixed-clock resulta in error hence mtk timer fails to probe. Skip setting parent to permit correct probe of the mtk timer. Fixes: d3c3606c5cc6 ("timer: MediaTek: add timer driver for MediaTek SoCs") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> 
Skip setting parent with dummy fixed-clock. Upstream linux might declare
an additional clock for the mtk timer and that additional clock might
also be a fixed-clock defined in DT. Setting parent of a dummy fixed-clock
resulta in error hence mtk timer fails to probe.

Skip setting parent to permit correct probe of the mtk timer.

Fixes: d3c3606c5cc6 ("timer: MediaTek: add timer driver for MediaTek SoCs")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet" 2024-05-20T19:35:03+00:00 Tom Rini trini@konsulko.com 2024-05-20T19:35:03+00:00 03de305ec48b0bb28554372abb40ccd46dbe0bf9 As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> 
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" 2024-05-19T14:16:36+00:00 Tom Rini trini@konsulko.com 2024-05-19T02:20:43+00:00 d678a59d2d719da9e807495b4b021501f2836ca5 When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> 
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Merge patch series "arm: Add Analog Devices SC5xx Machine Type" 2024-05-08T01:24:07+00:00 Tom Rini trini@konsulko.com 2024-05-08T01:24:07+00:00 1afa75c087a7961428f9cd9d0f47d5baa928c445 Greg Malysa <greg.malysa@timesys.com> says: This series adds support for the ADI SC5xx machine type and includes two core drivers that are required for being able to boot any board--a UART driver, the gptimer driver which is used as a clock reference (CNTVCNT is not supported on the armv7 sc5xx SoCs) and the clock tree driver. Our corresponding Linux support relies on u-boot configuring the clocks correctly before booting, so it is not possible to boot any board without the CGU/CDU configuration happening here. There are also no board files, device trees, or defconfigs included here, but some common definitions that will be used to build board files currently are. The sc5xx SoCs themselves include many armv7 families (sc57x, sc58x, and sc594) all using an ARM Cortex-A5, and one armv8 family (sc598) indended to be a drop-in replacement for the SC594 in terms of peripherals, with a Cortex-A55 instead. Some of the configuration code in dmcinit and clkinit is quite scary and causes a lot of checkpatch violations. It is modified from code initially provided by ADI, but it has not been fully rewritten. There's a question of how important it is to clean up this code--it has some quality violations, but it has been in use (including in production) for over two years and is known to work for performing the low level SoC initialization, while a rewrite might introduce timing or sequence bugs that could take a significant amount of time to detect in the future. 
Greg Malysa <greg.malysa@timesys.com> says:

This series adds support for the ADI SC5xx machine type and includes two
core drivers that are required for being able to boot any board--a UART
driver, the gptimer driver which is used as a clock reference (CNTVCNT
is not supported on the armv7 sc5xx SoCs) and the clock tree driver. Our
corresponding Linux support relies on u-boot configuring the clocks
correctly before booting, so it is not possible to boot any board
without the CGU/CDU configuration happening here. There are also no
board files, device trees, or defconfigs included here, but some common
definitions that will be used to build board files currently are. The
sc5xx SoCs themselves include many armv7 families (sc57x, sc58x, and
sc594) all using an ARM Cortex-A5, and one armv8 family (sc598) indended
to be a drop-in replacement for the SC594 in terms of peripherals, with
a Cortex-A55 instead.

Some of the configuration code in dmcinit and clkinit is quite scary and
causes a lot of checkpatch violations. It is modified from code
initially provided by ADI, but it has not been fully rewritten. There's
a question of how important it is to clean up this code--it has some
quality violations, but it has been in use (including in production) for
over two years and is known to work for performing the low level SoC
initialization, while a rewrite might introduce timing or sequence bugs
that could take a significant amount of time to detect in the future.
drivers: timer: Add in driver support for ADI SC5XX-family GP timer peripheral 2024-05-08T01:24:00+00:00 Greg Malysa greg.malysa@timesys.com 2024-04-25T00:04:03+00:00 8691ffa5c06f4a171d1c418cdb5711334dd2470d Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Co-developed-by: Angelo Dureghello <angelo.dureghello@timesys.com> Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Co-developed-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> 
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Co-developed-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Co-developed-by: Ian Roberts <ian.roberts@timesys.com>
Signed-off-by: Ian Roberts <ian.roberts@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
timer: Remove <common.h> and add needed includes 2024-05-07T14:00:56+00:00 Tom Rini trini@konsulko.com 2024-05-02T01:31:27+00:00 0a0a6b7e345ddc0ec9a8e3754115b23c04cb4527 Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> 
Remove <common.h> from this driver directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
treewide: Remove clk_free 2024-01-30T03:35:02+00:00 Sean Anderson seanga2@gmail.com 2023-12-16T19:38:42+00:00 c9309f40a6831b1ac5cd0a7227b5c3717d34c812 This function is a no-op. Remove it. Signed-off-by: Sean Anderson <seanga2@gmail.com> Link: https://lore.kernel.org/r/20231216193843.2463779-3-seanga2@gmail.com 
This function is a no-op. Remove it.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Link: https://lore.kernel.org/r/20231216193843.2463779-3-seanga2@gmail.com
global: Restrict use of '#include <linux/kconfig.h>' 2023-12-21T13:54:05+00:00 Tom Rini trini@konsulko.com 2023-12-14T12:16:54+00:00 b106961c2e4e7f339485a401ebb06c936fc432ee In general terms, we -include include/linux/kconfig.h and so normal U-Boot code does not need to also #include it. However, for code which is shared with userspace we may need to add it so that either our full config is available or so that macros such as CONFIG_IS_ENABLED() can be evaluated. In this case make sure that we guard these includes with a test for USE_HOSTCC so that it clear as to why we're doing this. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> 
In general terms, we -include include/linux/kconfig.h and so normal
U-Boot code does not need to also #include it. However, for code which
is shared with userspace we may need to add it so that either our full
config is available or so that macros such as CONFIG_IS_ENABLED() can be
evaluated. In this case make sure that we guard these includes with a
test for USE_HOSTCC so that it clear as to why we're doing this.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
timer: starfive: Add Starfive timer support 2023-12-18T03:08:54+00:00 Kuan Lim Lee kuanlim.lee@starfivetech.com 2023-12-11T02:22:10+00:00 429fa3b32dbbc89793823607b4151a35dc9e7629 Add timer driver in Starfive SoC. It is an timer that outside of CPU core and inside Starfive SoC. Signed-off-by: Kuan Lim Lee <kuanlim.lee@starfivetech.com> Signed-off-by: Wei Liang Lim <weiliang.lim@starfivetech.com> Changes for v2: - correct driver name, comment, variable Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> 
Add timer driver in Starfive SoC. It is an timer that outside
of CPU core and inside Starfive SoC.

Signed-off-by: Kuan Lim Lee <kuanlim.lee@starfivetech.com>
Signed-off-by: Wei Liang Lim <weiliang.lim@starfivetech.com>

Changes for v2:
- correct driver name, comment, variable
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>