u-boot.git/drivers/ufs/Makefile, branch v2020.04Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/drivers/ufs/Makefile?h=v2020.042019-10-24T00:47:12Zufs: Add glue layer driver for TI J721E devices2019-10-24T00:47:12ZFaiz Abbasfaiz_abbas@ti.com2019-10-15T12:54:38Zurn:sha1:4390eaf67630ed0cff1ed069d73a243c145c2aa5
Add glue layer driver for the controller present on TI's J721E devices.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
ufs: Add Support for Cadence platform UFS driver2019-10-24T00:47:12ZFaiz Abbasfaiz_abbas@ti.com2019-10-15T12:54:37Zurn:sha1:ef5fb5a84cd7d09fe577f6664885df14310861e9
Add Support for the platform driver for the Cadence device present on
TI's J721e device.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
ufs: Add Initial Support for UFS subsystem2019-10-24T00:47:12ZFaiz Abbasfaiz_abbas@ti.com2019-10-15T12:54:36Zurn:sha1:7feafb0ae4f703874119bd90d53258134f850d37
Add Support for UFS Host Controller Interface (UFSHCI) for communicating
with Universal Flash Storage (UFS) devices. The steps to initialize the
host controller interface are the following:
- Initiate the Host Controller Initialization process by writing to the
Host controller enable register.
- Configure the Host Controller base address registers by allocating a
host memory space and related data structures.
- Unipro link startup procedure
- Check for connected device
- Configure UFS host controller to process requests
Also register this host controller as a SCSI host controller.
Taken from Linux Kernel v5.2 (drivers/scsi/ufs/ufshcd.c) and ported to
U-boot.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>