u-boot.git/drivers/usb/common, branch v2024.01 Unnamed repository; edit this file 'description' to name the repository. common: Drop linux/printk.h from common header 2023-09-24T13:54:57+00:00 Simon Glass sjg@chromium.org 2023-09-15T00:21:46+00:00 1e94b46f73cedcebbff73799203f3266c5b28d90 This old patch was marked as deferred. Bring it back to life, to continue towards the removal of common.h Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass <sjg@chromium.org> 
This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
usb: add isp1760 family driver 2022-07-12T19:59:54+00:00 Rui Miguel Silva rui.silva@linaro.org 2022-06-29T10:06:15+00:00 88861a2c2c4f4f00008c14911e05f645ae5dd915 ISP1760/61/63 are a family of usb controllers, here the main goal is to support the ISP1763 hcd part found in the MPS3 FPGA board form Arm. This is based on the kernel driver and ported to u-boot. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> 
ISP1760/61/63 are a family of usb controllers, here the main
goal is to support the ISP1763 hcd part found in the MPS3 FPGA
board form Arm. This is based on the kernel driver and ported
to u-boot.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
usb: common: move urb code to common 2022-07-12T19:59:54+00:00 Rui Miguel Silva rui.silva@linaro.org 2022-06-29T10:06:14+00:00 b2d2b7872249e6816487e95bd9197a9417aa62bb Move urb code from musb only use to a more common scope, so other drivers in the future can use the handling of urb in usb. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> 
Move urb code from musb only use to a more common scope, so other
drivers in the future can use the handling of urb in usb.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig 2022-06-28T21:11:48+00:00 Tom Rini trini@konsulko.com 2022-06-13T00:02:04+00:00 3371eddaa10212b1303b2de305e1d976fe7770ca This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com> 
This converts the following to Kconfig:
   CONFIG_USB_MAX_CONTROLLER_COUNT

Signed-off-by: Tom Rini <trini@konsulko.com>
usb: xhci-dwc3: Support role switch default role 2022-05-20T07:41:33+00:00 Mark Kettenis kettenis@openbsd.org 2022-04-19T19:06:33+00:00 6a6468f479a7e816fb656b3e1d8af30c7de837a4 When the device tree indicates support for role switching through the "usb-role-switch" property, take the "role-switch-default-mode" property into account when deciding which role to put the controller into. This makes USB devices work on Apple M1 systems where the device tree may include a "dr_mode" property that is set to "otg", but where we need to put the controller into "host" mode to see devices connected to the type-C ports. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> 
When the device tree indicates support for role switching through
the "usb-role-switch" property, take the "role-switch-default-mode"
property into account when deciding which role to put the
controller into.

This makes USB devices work on Apple M1 systems where the device
tree may include a "dr_mode" property that is set to "otg", but
where we need to put the controller into "host" mode to see
devices connected to the type-C ports.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
usb: common: silence dubious errors 2021-11-09T11:48:23+00:00 Michael Walle michael@walle.cc 2021-10-15T13:15:20+00:00 7f79a2c2357d16fc9dd08e761e931a4f2169d625 Both dr_mode and maximum-speed properties are usually optional. Drivers will still try to fetch the properties nonetheless, which leads to error messages, although they are no errors. Change pr_err() to pr_debug(). Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> 
Both dr_mode and maximum-speed properties are usually optional. Drivers
will still try to fetch the properties nonetheless, which leads to error
messages, although they are no errors. Change pr_err() to pr_debug().

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
usb: add support for ULPI/SERIAL/HSIC PHY modes 2021-09-22T19:29:56+00:00 Matthias Schiffer matthias.schiffer@ew.tq-group.com 2021-09-20T13:37:22+00:00 950cb1f25f0bf7aaa83db41b14fc2aaab214125c Import usb_phy_interface enum values and DT match strings from the Linux kernel. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> 
Import usb_phy_interface enum values and DT match strings from the Linux
kernel.

Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
common: Drop asm/global_data.h from common header 2021-02-02T20:33:42+00:00 Simon Glass sjg@chromium.org 2020-10-31T03:38:53+00:00 401d1c4f5d2d29c4bc4beaec95402ca23eb63295 Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> 
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
usb: common: add define of usb_speed_string() 2020-10-19T22:49:05+00:00 Chunfeng Yun chunfeng.yun@mediatek.com 2020-10-14T07:08:28+00:00 d92e866f6008fdd6483735c6fd1ed95c8fdc87b1 There is only declaration of usb_speed_string(), but no definition, so add it to avoid build error when call it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
There is only declaration of usb_speed_string(), but no definition,
so add it to avoid build error when call it.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
usb: add USB_SPEED_SUPER_PLUS 2020-10-19T22:49:05+00:00 Chunfeng Yun chunfeng.yun@mediatek.com 2020-10-14T07:08:27+00:00 a4de6e380fd1078c3f06210a0be0f3f8a69062dc Add enum USB_SPEED_SUPER_PLUS for USB3.1 Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> 
Add enum USB_SPEED_SUPER_PLUS for USB3.1

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>