u-boot.git/drivers/usb/dwc3/Makefile, branch master Unnamed repository; edit this file 'description' to name the repository. Kbuild: Always use $(PHASE_) 2025-04-11T18:16:44+00:00 Tom Rini trini@konsulko.com 2025-04-01T22:55:23+00:00 302b41d5397e9f821d360a74335e8821d4513970 It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our Makefiles as part of the macros to determine when to do something in our Makefiles based on what phase of the build we are in. For consistency, bring this down to a single macro and use "$(PHASE_)" only. Signed-off-by: Tom Rini <trini@konsulko.com> 
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.

Signed-off-by: Tom Rini <trini@konsulko.com>
usb: dwc3-generic: Add STih407 support 2025-02-11T08:00:42+00:00 Patrice Chotard patrice.chotard@foss.st.com 2025-01-30T16:35:43+00:00 23542078ec9a49cfb35cc00a6715106afbf65627 Add STi glue logic to manage the DWC3 HC on STiH407 SoC family. It configures the internal glue logic and syscfg registers. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20250130163547.512990-6-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> 
Add STi glue logic to manage the DWC3 HC on STiH407
SoC family. It configures the internal glue logic and
syscfg registers.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20250130163547.512990-6-patrice.chotard@foss.st.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
global: Rename SPL_ to XPL_ 2024-10-11T17:44:48+00:00 Simon Glass sjg@chromium.org 2024-09-30T01:49:53+00:00 c46760d5967d12b6f7d37402878d1607a98b2b84 Use XPL_ as the symbol to indicate an SPL build. This means that SPL_ is no-longer set. Signed-off-by: Simon Glass <sjg@chromium.org> 
Use XPL_ as the symbol to indicate an SPL build. This means that SPL_ is
no-longer set.

Signed-off-by: Simon Glass <sjg@chromium.org>
usb: dwc3: Add dwc3 glue driver for am62 2024-05-15T16:45:02+00:00 Sjoerd Simons sjoerd@collabora.com 2024-05-06T14:38:41+00:00 92114d7c0a19a9719cfd821cf9e44a7fc090b2c1 Add glue code for TI AM62 to the dwc3 driver; Most code adopted from TI vendor u-boot code. Signed-off-by: Sjoerd Simons <sjoerd@collabora.com> Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on beagle play 
Add glue code for TI AM62 to the dwc3 driver; Most code adopted from
TI vendor u-boot code.

Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on beagle play
usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver 2022-07-15T12:10:39+00:00 Angus Ainslie angus@akkea.ca 2022-07-14T15:11:11+00:00 582ce23c7870b93e361083b1578ae45ed61df9b6 Suppress warnings when building the SPL without USB_DWC3_GENERIC Signed-off-by: Angus Ainslie <angus@akkea.ca> 
Suppress warnings when building the SPL without USB_DWC3_GENERIC

Signed-off-by: Angus Ainslie <angus@akkea.ca>
usb: dwc3: add layerscape support 2021-11-09T11:48:23+00:00 Michael Walle michael@walle.cc 2021-10-15T13:15:23+00:00 2b0b51d0bedf70ced90960eb029908d04c8e4d77 Add support for the proper dwc3 device tree binding support as specified in the offical device tree spec. Initially, add support for the LS1028A support. Other SoCs should be easy to add by just adding the corresponding compatible string. Unfortunately, the device trees of all other layerscape SoCs are not converted and uses a wrong compatible string only known in u-boot. To maintain backwards compatibility with current u-boot device trees, add the generic "fsl,layerscape-dwc3" compatible string. OTG mode is not supported yet. The dr_mode in the devicetree will either have to be set to peripheral or host. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> 
Add support for the proper dwc3 device tree binding support as specified
in the offical device tree spec.

Initially, add support for the LS1028A support. Other SoCs should be
easy to add by just adding the corresponding compatible string.
Unfortunately, the device trees of all other layerscape SoCs are not
converted and uses a wrong compatible string only known in u-boot.

To maintain backwards compatibility with current u-boot device trees,
add the generic "fsl,layerscape-dwc3" compatible string.

OTG mode is not supported yet. The dr_mode in the devicetree will either
have to be set to peripheral or host.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
usb: dwc3: add Amlogic GXL & GXL DWC3 Glue 2020-10-05T15:59:45+00:00 Neil Armstrong narmstrong@baylibre.com 2020-09-10T08:48:13+00:00 46eddbc58f0d038df5fb51d6c27a989ba826a620 The USB support was initialy done with a set of PHYs and dwc3-of-simple because the architecture of the USB complex was not understood correctly at the time (and proper documentation was missing...). But with the G12A family, the USB complex was correctly understood and implemented correctly. This adds a proper driver for the glue, based on the G12A one, but with enough changes to require a different driver in U-Boot. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> 
The USB support was initialy done with a set of PHYs and dwc3-of-simple
because the architecture of the USB complex was not understood correctly
at the time (and proper documentation was missing...).

But with the G12A family, the USB complex was correctly understood and
implemented correctly.

This adds a proper driver for the glue, based on the G12A one, but with
enough changes to require a different driver in U-Boot.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
usb: dwc3: Add Meson G12A USB Glue 2019-05-09T08:38:32+00:00 Neil Armstrong narmstrong@baylibre.com 2019-02-19T12:42:01+00:00 adb049abf7a209629c7b5e4bc673a0d802c616c2 Adds support for Amlogic G12A USB Control Glue HW. The Amlogic G12A SoC Family embeds 2 USB Controllers : - a DWC3 IP configured as Host for USB2 and USB3 - a DWC2 IP configured as Peripheral USB2 Only A glue connects these both controllers to 2 USB2 PHYs, and optionnally to an USB3+PCIE Combo PHY shared with the PCIE controller. The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including routing of the OTG PHY between the DWC3 and DWC2 controllers, and setups the on-chip OTG mode selection for this PHY. This driver sets the OTG capable port as Host mode by default, the switch to Device mode is to be done in a separate patch. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Marek Vasut <marex@denx.de> 
Adds support for Amlogic G12A USB Control Glue HW.

The Amlogic G12A SoC Family embeds 2 USB Controllers :
- a DWC3 IP configured as Host for USB2 and USB3
- a DWC2 IP configured as Peripheral USB2 Only

A glue connects these both controllers to 2 USB2 PHYs, and optionnally
to an USB3+PCIE Combo PHY shared with the PCIE controller.

The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including
routing of the OTG PHY between the DWC3 and DWC2 controllers, and
setups the on-chip OTG mode selection for this PHY.

This driver sets the OTG capable port as Host mode by default,
the switch to Device mode is to be done in a separate patch.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Marek Vasut <marex@denx.de>
usb: dwc3: Add generic DWC3 glue logic driver 2018-05-18T11:23:10+00:00 Michal Simek michal.simek@xilinx.com 2018-05-18T11:15:06+00:00 49d674547c5bf668802b4b6a24218205fed957f0 By enabling BLK by default this is the next driver which needs to get support for DM_USB. Adding generic DWC3 glue logic which only parse nodes and read device mode. Based on it probe proper host/peripheral DWC3 drivers for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
By enabling BLK by default this is the next driver which needs to get
support for DM_USB. Adding generic DWC3 glue logic which only
parse nodes and read device mode. Based on it probe proper
host/peripheral DWC3 drivers for it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07T13:34:12+00:00 Tom Rini trini@konsulko.com 2018-05-06T21:58:06+00:00 83d290c56fab2d38cd1ab4c4cc7099559c1d5046 When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>