u-boot.git/drivers/usb/dwc3/core.c, branch v2020.01

usb: dwc3: Fix UTMI/UTMIW phy interface initialization

2019-12-21T19:35:16Z

DWC3 support phy interfaces like 8/16-bit UTMI+. phy interface initialization code would handle them properly along with UNKNOWN type by default if none of the user/board doesn't need to use the phy interfaces at all. The current code is masking the 8/16-bit UTMI+ interface bits globally which indeed effect the UNKNOWN cases, therefore it effects the platforms which are not using phy interfaces at all. So, handle the phy masking bits accordingly on respective interface type cases. Fixes: 6b7ebff00190 ("usb: dwc3: Add phy interface for dwc3_uboot") Reported-by: Andy Shevchenko Signed-off-by: Jagan Teki

common: Move ARM cache operations out of common.h

2019-12-02T23:24:58Z

These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass Reviewed-by: Daniel Schwierzeck Reviewed-by: Tom Rini

usb: dwc3: Add phy interface for dwc3_uboot

2019-11-23T14:29:49Z

U-Boot has two different variants of dwc3 initializations, - with dm variant gadget, so the respective dm driver would call the dwc3_init in core. - with non-dm variant gadget, so the usage board file would call dwc3_uboot_init in core. The driver probe would handle all respective gadget properties including phy interface via phy_type property and then trigger dwc3_init for dm-variant gadgets. So, to support the phy interface for non-dm variant gadgets, the better option is dwc3_uboot_init since there is no dedicated controller for non-dm variant gadgets. This patch support for adding phy interface like 8/16-bit UTMI+ code for dwc3_uboot. This change used Linux phy.h enum list, to make proper code compatibility. Cc: Marek Vasut Tested-by: Levin Du Signed-off-by: Jagan Teki Reviewed-by: Marek Vasut Reviewed-by: Kever Yang

usb: dwc3: Kconfig: get rid of obsolete mode selection

2019-10-24T09:28:17Z

The mode selection for the DWC3 is kind of obsolete. The driver does not have to be host only or gadget only. This choice is confusing. All the remaining callers of dwc3_uboot_init() explicitly set dr_mode before calling the function, so none rely on a default behavior. Remove the choice menu and keep only the USB_DWC3_GADGET option. Enable it by default if USB_GADGET and USB_DWC3 are enabled. It must be disabled for the evb-rk3328 as it uses DWC2 for the gadget and DWC3 for the host. Signed-off-by: Jean-Jacques Hiblot

usb: dwc3: Add dwc3_of_parse() to get quirks information from DT

2019-10-24T09:28:17Z

Add a new function that read quirk and configuration information from the DT. The goal is to allow platforms using their own version of DWC3 driver to migrate to the generic DWC3 driver. The function is adapted from the function dwc3_get_properties() in the linux dwc3 driver introduced in commit c5ac6116db35d. Signed-off-by: Jean-Jacques Hiblot

usb: dwc3-generic: add a new host driver that uses the dwc3 core

2019-10-24T09:28:17Z

Currently the host driver used by dwc3-generic is "xhci-dwc3". This is a functional driver but it doesn't use the dwc3 core and, in particular, it lacks some bits that may be important. For example on the k2 platforms, it is important that the phy are properly suspended when the USB is not used anymore. The dwc3 core also has a partial support for quirks. The new driver can be used as a drop-in replacement for "xhci-dwc3". In terms of implementation, it may seem strange that 2 private structures dwc3_generic_host_priv and dwc3_generic_priv) are used. The reason for this is simply that the xhci layer expects a struct xhci_ctrl at the beginning of the private data and it seemed wasteful to include it also for the peripheral case. Signed-off-by: Jean-Jacques Hiblot

usb: dwc3: switch to peripheral mode when exiting

2019-10-24T09:28:16Z

This allow the phy to enter idle and then suspend. the K2 platforms require the PHY to be suspended before the USB domain clock can be turned off. Signed-off-by: Jean-Jacques Hiblot

drivers: usb: dwc3: setup phy before dwc3 core soft reset

2019-10-08T07:41:27Z

Phy setup should be done before dwc3 soft core reset as it is done in linux & this fixes unreliable detection of usb cable on host side. Signed-off-by: T Karthik Reddy Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek

dwc3: move phy operation to core.c

2018-12-07T15:31:45Z

Those operations can be used for peripheral operation as well as host operation. Signed-off-by: Jean-Jacques Hiblot # Conflicts: # drivers/usb/dwc3/core.c # drivers/usb/host/xhci-dwc3.c

usb: introduce a separate config option for DM USB device

2018-12-07T15:31:45Z

Using CONFIG_DM_USB for this purpose prevents using DM_USB for host and not for device. Signed-off-by: Jean-Jacques Hiblot Reviewed-by: Lukasz Majewski