u-boot.git/drivers/usb/dwc3/io.h, branch main

usb: dwc3: invalidate dcache on buffer used in interrupt handling

2024-10-15T09:03:57Z

On Qualcomm systems, the setup buffer and even buffers are in a bad state at interrupt handling, so invalidate the dcache lines for the setup_buf and event buffer to make sure we read correct data written by the hardware. This fixes the following error: dwc3-generic-peripheral usb@a600000: UNKNOWN IRQ type -1 dwc3-generic-peripheral usb@a600000: UNKNOWN IRQ type 4673109 and invalid situation in dwc3_gadget_giveback() because setup_buf content is read at 0s and leads to fatal crash fixed by [1]. [1] https://lore.kernel.org/all/20240528-topic-sm8x50-dwc3-gadget-crash-fix-v1-1-58434ab4b3d3@linaro.org/ Reviewed-by: Mattijs Korpershoek Signed-off-by: Neil Armstrong Reviewed-by: Marek Vasut Link: https://lore.kernel.org/r/20241011-u-boot-dwc3-gadget-dcache-fixup-v4-3-5f3498d8035b@linaro.org Signed-off-by: Mattijs Korpershoek

usb: dwc3: fix dcache flush range calculation

2024-10-15T09:03:57Z

The current flush operation will omit doing a flush/invalidate on the first and last bytes if the base address and size are not aligned with CACHELINE_SIZE. This causes operation failures Qualcomm platforms. Take in account the alignment and size of the buffer and also flush the previous and last cacheline. Reviewed-by: Mattijs Korpershoek Signed-off-by: Neil Armstrong Reviewed-by: Marek Vasut Link: https://lore.kernel.org/r/20241011-u-boot-dwc3-gadget-dcache-fixup-v4-2-5f3498d8035b@linaro.org Signed-off-by: Mattijs Korpershoek

tree-wide: Replace http:// link with https:// link for ti.com

2023-11-10T16:01:50Z

Replace instances of http://www.ti.com with https://www.ti.com Signed-off-by: Nishanth Menon

common: Move ARM cache operations out of common.h

2019-12-02T23:24:58Z

These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass Reviewed-by: Daniel Schwierzeck Reviewed-by: Tom Rini

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

usb: dwc3: ensure consistent types for dwc3_flush_cache

2017-04-14T14:44:16Z

The dwc3_flush_cache() call was declared and used inconsistently: * The declaration assumed 'int' for addresses (a potential issue when running in a LP64 memory model). * The invocation cast the address to 'long'. This change ensures that both the declaration and usage of this function consistently uses 'uintptr_t' for correct behaviour even when the allocated buffers (to be flushed) reside outside of the lower 32bits of memory. Signed-off-by: Philipp Tomsich

usb: dwc3: Fix warnings on 64-bit builds

2015-11-03T16:29:54Z

Change aritmentics to use 64bit types to be compatible with 64bit builds. Signed-off-by: Michal Simek

dwc3: flush the buffers before using it

2015-04-14T03:48:10Z

In the linux kernel, non cacheable buffers are used. However in uboot since there are no APIs to allocate non cacheable memory, all the buffers should be flushed before using it. Signed-off-by: Kishon Vijay Abraham I

usb: dwc3: fix dwc3 header files

2015-04-14T03:48:09Z

Changed the header files included in core.h and io.h to the u-boot header files so that these files can be included in other dwc3 source files and be compiled in uboot. Also added otg.h which has the defines for dr_mode. Signed-off-by: Kishon Vijay Abraham I Reviewed-by: Lukasz Majewski

usb: dwc3: remove trace_* APIs from dwc3 driver

2015-04-14T03:48:09Z

Removed most of the trace_* APIs from dwc3 driver since tracepoints are not supported in u-boot. Replaced some of the trace_* API with dev_dbg/dev/vdbg. Signed-off-by: Kishon Vijay Abraham I Review-by: Lukasz Majewski