u-boot.git/drivers/usb/eth, branch v2014.07

usb: eth: smsc95xx: add LAN9500A device ID

2014-06-25T20:46:28+00:00

Add LAN9500A product ID (0x9e00) in order to support LAN9500A based dongles.
Tested on cm_t335.

Signed-off-by: Ilya Ledvich 
Acked-by: Marek Vasut

usb: cosmetic: double const

2014-06-25T20:22:20+00:00

For plain array const can be either before or after
the type definition. Adding both is simply redundand.
Remove the later one.

cc: marex@denx.de
Signed-off-by: Jeroen Hofstee

usb: net: introduce support for Moschip USB ethernet

2014-03-12T21:04:31+00:00

introduce an 'mcs7830' driver for Moschip MCS7830 based (7730/7830/7832)
USB 2.0 Ethernet Devices

see "MCS7830 -- USB 2.0 to 10/100M Fast Ethernet Controller" at
http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=109;74;109

the driver was implemented based on the U-Boot Asix driver with
additional information gathered from the Moschip Linux driver,
development was done on "Delock 61147" and "Logilink UA0025C" dongles

Signed-off-by: Gerhard Sittig 
Acked-by: Marek Vasut

net: asix: don't pad odd-length TX packets

2014-03-07T15:59:06+00:00

For Ethernet/USB RX packets, the ASIX HW pads odd-sized packets so that
they have an even size. Currently, asix_recv() does remove this padding,
and asic_send() adds equivalent padding in the TX path. However, the HW
does not appear to need this packing for TX packets in practical testing
with "ASIX Elec. Corp. AX88x72A 000001" Vendor: 0x0b95 Product 0x7720
Version 0.1. The Linux kernel does no such padding for the TX path.

Remove the padding from the TX path:

* For consistency with the Linux kernel.
* NVIDIA has a Tegra simulator which validates that the length of USB
  packets sent to an ASIX device matches the packet length value inside
  the packet data. Having U-Boot and the kernel do the same thing when
  creating the TX packets simplifies the simulator's validation.

Cc: Lucas Stach 
Cc: Marek Vasut 
Cc: Simon Glass 
Signed-off-by: Stephen Warren 
Acked-by: Simon Glass 
Acked-by: Marek Vasut 
Tested-by: Marek Vasut 
Tested-by: Gerhard Sittig

drivers: usb: convert makefiles to Kbuild style

2013-10-31T17:25:38+00:00

Signed-off-by: Masahiro Yamada

usb:smsx95xx LED activity for USB net driver

2013-10-20T21:42:40+00:00

Add LED activity for SMSX95XX USB Ether driver.

Signed-off-by: “Suriyan Ramasami" 
Acked-by: Simon Glass

net: smsc95xx: Add support for another SMSC95xx variant

2013-08-19T17:34:18+00:00

This patch adds support for the SMSC9500 with product id 0x9900 which is
equipped in the "EXSYS USB 2.0" etherner USB adapter.

Tested on omap3_beagle.

Signed-off-by: Stefan Roese

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

usb: add support for the USB Ethernet adapter D-Link DUB-E100 H/W Ver C1

2013-06-30T16:41:08+00:00

This trivial patch adds the definition of the vid/pid for the Ver C1 of the
USB Ethernet adapter D-Link DUB-E100.

Signed-off-by: Pierre Aubert 
CC: Marek Vasut

usb: asix: Move software resets to basic_init

2013-06-12T20:22:51+00:00

The ASIX driver calls a basic_init() function during get_info(), so that
not all initialization tasks need to be redone on every init().
Unfortunately, the most important one is still triggered too often: the
driver does a full port and MII reset on every asix_init(), requiring up
to several seconds to reestablish the link.

This patch confines that software reset into the asix_basic_init()
function so that it will only be executed once. This saves about a
second of boot time on systems using BOOTP.

Note: this patch was previously submitted many moons ago as:

   usb: usbeth: asix: Do a fast init if link already established

That patch seens to have been lost or forgotten, so this is a rebased
version. It is tested on snow with a Asix USB dongle (Cisco).

Signed-off-by: Julius Werner 
Signed-off-by: Simon Glass 
Reviewed-by: Simon Glass 
Reviewed-by: Vadim Bendebury