u-boot.git/drivers/usb/gadget, branch v2015.07

usb: f_mass_storage: sleep_thread: decrease the interval for check ctrlc()

2015-06-08T13:26:00Z

This change decreases the interval of calls to: - display busy indicator - check ctrlc() - check cable connection By this change, breaking the UMS command is more easy on Odroid XU3. Signed-off-by: Inha Song Cc: Lukasz Majewski Cc: Marek Vasut

ci_udc: Update the ci_udc driver to support bulk transfers

2015-05-29T10:41:04Z

Update the ci_udc driver to support bulk transfer and also added capability of having multiple dtds if requested data is more than 16K. These changes are tested for both the DFU and lthor. Signed-off-by: Siva Durga Prasad Paladugu

net: cosmetic: Fix var naming net <-> eth drivers

2015-04-18T17:11:33Z

Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger Acked-by: Simon Glass

net: cosmetic: Name ethaddr variables consistently

2015-04-18T17:11:32Z

Use "_ethaddr" at the end of variables and drop CamelCase. Make constant values actually 'const'. Signed-off-by: Joe Hershberger Acked-by: Simon Glass

dm: usb: Allow setting up a USB controller as a device/gadget

2015-04-18T17:11:25Z

Some controllers support OTG (on-the-go) where they can operate as either host or device. The gadget layer in U-Boot supports this. While this layer does not interact with driver model, we can provide a function which sets up the controller in the correct way. This way the code at least builds (although it likely will not work). Signed-off-by: Simon Glass Reviewed-by: Marek Vasut

fastboot: add support for reboot-bootloader command

2015-04-14T08:19:05Z

The "fastboot reboot-bootloader" command is defined to re-enter into fastboot mode after rebooting into bootloader. This command is usually used after updating bootloader via fastboot. This commit implements only a generic side of the command - setting of the reset flag and then resetting. Setting of the reset flag is implemented using __weak fb_set_reboot_flag() function. The actual setting and checking of the reset flag should be implemented by a boot script and/or board/SoC specific code. Signed-off-by: Alexey Firago Tested-by: Steve Rae [Test HW: bcm28155_ap board]

usb: gadget: thor: Claim EP after allocating it in thor gadget

2015-04-14T03:48:12Z

Storing thor device struct as an EP private data. It is necessary for DWC3 operation. Signed-off-by: Marek Szyprowski

usb: dwc3: gadget: add common endpoint configuration for dwc3 udc driver

2015-04-14T03:48:12Z

This patch adds code to select standard, commonly used usb endpoint configuration (ep1in-bulk, ep2out-bulk, ep3in-int) to dwc3 driver. This ensures compatibility with old userspace and windows drivers, which expects hardcoded endpoint numbers. Signed-off-by: Marek Szyprowski

usb: composite: Add .reset callback to usb_gadget_driver structure

2015-04-14T03:48:12Z

DWC3 UDC driver requires presence of .reset callback in a composite driver. This setting is similar to the one nowadays present in linux kernel. Signed-off-by: Lukasz Majewski

usb: modify usb_gadget_handle_interrupts to take controller index

2015-04-14T03:48:11Z

Since we support multiple dwc3 controllers to be existent at the same time, in order to handle the interrupts of a particular dwc3 controller usb_gadget_handle_interrutps should take controller index as an argument. Hence the API of usb_gadget_handle_interrupts is modified to take controller index as an argument and made the corresponding changes to all the usb_gadget_handle_interrupts calls. Signed-off-by: Kishon Vijay Abraham I Reviewed-by: Lukasz Majewski