u-boot.git/drivers/usb/host/Kconfig, branch v2016.09

dm: atmel: Add driver model support for the ehci driver

2016-08-15T20:58:04Z

Add driver model support while retaining the existing legacy code. This allows the driver to support boards that have converted to driver model as well as those that have not. Signed-off-by: Wenyou Yang Acked-by: Simon Glass

usb: add (move) CONFIG_USB_HOST to Kconfig

2016-08-07T19:55:42Z

The meaning of CONFIG_USB in U-Boot is different from that in Linux. As you see in drivers/usb/Kconfig of Linux, CONFIG_USB enables the USB host controller support, while CONFIG_USB_SUPPORT is used to enable the whole of the USB sub-system. When I added CONFIG_USB into Kconfig by commit 6e7e9294d321 ("usb: add basic USB configs in Kconfig"), I planned to follow the Linux's convention, i.e. CONFIG_USB to enable/disable the USB host support. Then, commit 68f7c5db2d1e ("usb: Generic USB Kconfig option, that fits both host and gadget and comments") changed the logic of the CONFIG_USB to point to the whole of the USB sub-system. As a result, currently we do not have an option for USB host. This commit adds CONFIG_USB_HOST, which will be useful to compile in the USB host support code. CONFIG_USB_HOST is not referenced at all, but strangely some boards define it in board headers. I removed them because USB_HOST will be selected in Kconfig going forward. Signed-off-by: Masahiro Yamada

usb: add CONFIG_USB_UHCI_HCD in Kconfig

2016-08-07T19:55:42Z

There is no UHCI driver entry in Kconfig for now, but we have some UHCI drivers, for example, LEON. This is a placeholder in case we want to move them to Kconfig in the future. The help message was copied from Linux. Signed-off-by: Masahiro Yamada

usb: add CONFIG_USB_OHCI_HCD in Kconfig

2016-08-07T19:55:42Z

Add this option as a common config for all OHCI controllers. Its help message was copied from Linux. Also, I moved it below EHCI to respect the order in Linux's Kconfig. Add CONFIG_USB_OHCI_HCD=y to axs103_defconfig, which is the only user of OHCI_GENERIC. Signed-off-by: Masahiro Yamada

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

2016-07-28T12:45:00Z

usb: Kconfig: Add Kconfigs entry USB_EHCI_ZYNQ

2016-07-22T12:06:11Z

Add Kconfig entry config option for USB_EHCI_ZYNQ and update the same to enable for all zynq boards which supports USB Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek

usb: ehci-mx6: introduce config for high active power pin

2016-07-19T17:52:14Z

Add a new config CONFIG_MXC_USB_OTG_HACTIVE which configures the OTG Power Pin to be high active. Low active is the reset value of the affected configuration register, hence the config option is named by the non-reset configuration. Signed-off-by: Stefan Agner

usb: move CONFIG_USB_EHCI_MX7 to Kconfig

2016-07-19T17:52:14Z

Create an entry for "config USB_EHCI_MX7" in Kconfig and switch over to it for all boards. Signed-off-by: Stefan Agner

usb: move CONFIG_USB_XHCI_DWC3 to Kconfig

2016-06-03T22:43:53Z

Create an entry for "config USB_XHCI_DWC3" in Kconfig and switch over to it for all boards. Signed-off-by: Masahiro Yamada

usb: move CONFIG_USB_XHCI to Kconfig with renaming

2016-06-03T22:43:53Z

Move CONFIG_USB_XHCI to defconfig files for all boards, renaming it into CONFIG_USB_XHCI_HCD. As commented in the help of "config USB_XHCI" entry, this has been a TODO for a long time; now CONFIG_USB_XHCI_HCD and CONFIG_USB_XHCI have been unified in favor of the former. Note: Some boards define CONFIG_USB_XHCI in their headers without CONFIG_USB, which does not meet the "depends on" in Kconfig. I added CONFIG_USB=y for those boards when converting. Otherwise, they would fail to build. Signed-off-by: Masahiro Yamada