Now, all this driver does can be covered by the generic EHCI driver
(drivers/usb/host/ehci-generic.c).  UniPhier SoCs have switched to
use it.  Delete this driver rather than bothering to convert it to
Driver Model.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Marek Vasut <marex@denx.de>

This driver is designed in a generic manner, so clocks should be
handled genericly as well.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Use existing library function to poll bit(s).

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>

Use existing library function to poll bit(s).

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Tested-by: Sylvain Lemieux <slemieux@tycoint.com>

Use existing library function to poll bit(s).

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>

Add a compatible string to allow this to be specified in the device tree
if needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

USB protocol allows for 16 IN and 16 OUT endpoints (USB 2.0 Spec,
8.3.2.2 Endpoint Field). A function may have an EP 1 for both IN and OUT,
so these two should be kept separate. As EPs are either BULK or INTERRUPT
(or ISO), it is fine to have one array per direction for all transfer
types (also see e236519b7365ef75c5da6a5623f0b03d9c00cfae).

USB device address is 7 bits, so a bus may have more than 16 devices.
Check the device number, as the DWC2 driver only supports BULK/ISO for
the first 16 devices.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>

CSPLITs for INTERRUPT transactions have to be scheduled in each microframe
following the SSPLIT. INTERRUPT transfers are executed in the next even/
odd microframe depending on the HCCHAR_ODDFRM flag.

As there are no handshakes for INTERRUPT SSPLITs the SSPLIT may have
failed (transport error) without the error being detected by the host
driver. If the last CSPLIT is not received within 4 microframes after the
SSPLIT there was a transaction error and the complete transaction has
to be restarted.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>

In contrast to non-SPLIT transfers each transaction has to be submitted
as an individual chunk.
The transaction state machine proceeds from SSPLIT to CSPLIT if the ACK
flag is set. CSPLIT has to be repeated while NYET is set.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>