Workaround makes FS as default mode on all affected socs.

Add support to check erratum-A005275 validity for an soc. This info is
required to determine whether a given soc is affected by this erratum.
Add quirk for this erratum "has_fsl_erratum_a005275" . This quirk is used
to enable workaround for the errata

Force FS mode as default by:
        - making EPS as FS
        - setting PFSC bit to disable HS chirping

This workaround can be disabled by mentioning "no_erratum_a005275" in
hwconfig string

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: York Sun <york.sun@nxp.com>

MSM uses the chipidea controller IP, however it requires
to reinit the phy after controller reset. in EHCI mode there's a
dedicated callback for it.
In device mode however there's no such callback.
Add implementaion of ci_init_after_reset() to implement the above
requirement in case CI_UDC driver is used.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>

Change ehci_usb_probe() function to initialize the
USB according to the init_type provided.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>

All the underlying USB PHY was handled in the ehci driver.
Use the generic phy API instead.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>

platdata_auto_alloc_size was not initialized in structure.
Caused null pointer dereference when configuring device as
gadget.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>

Use standard board_usb_init() instead of the specific board_prepare_usb.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>

Add vbus-supply regulator support.
On some board vbus is not controlled by the phy but by
an external regulator.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

Add code to reset all reset signals as in usb DT node. A reset property
is an optional feature, so only print out a warning and do not fail if a
reset property is not present.

If a reset property is discovered, then use it to deassert, thus
bringing the IP out of reset.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

Add support for operating a PHY attached to ehci-pci. There are
systems where the EHCI controller is internally wired to a PCI
bus and has a PHY connected to it as well, ie. the R-Car Gen2.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Pull out the EHCI PHY functions into the ehci-hcd.c to let other
EHCI drivers use them.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>