u-boot.git/drivers/usb/host, branch v2020.07-rc2

usb: mx6: add fuse check

2020-05-10T11:21:27Z

Add fuse check for USB. If the fuse indicates the module will not work in the SoC, let's fail the initialization. Signed-off-by: Peng Fan

xhci: mediatek: Add support for MTK xHCI host controller

2020-05-02T10:32:28Z

This patch is used to support the on-chip xHCI controller on MediaTek SoCs, currently control/bulk/interrupt transfers are supported. Signed-off-by: Chunfeng Yun Signed-off-by: Frank Wunderlich Reviewed-by: Weijie Gao Reviewed-by: Jagan Teki

usb: dwc3: use the phy bulk API to get phys

2020-05-02T10:32:28Z

Get a group of phys by the phy bulk API Signed-off-by: Chunfeng Yun Signed-off-by: Frank Wunderlich Reviewed-by: Weijie Gao

usb: host: dwc3-sti-glue: Use UCLASS_NOP instead of UCLASS_MISC

2020-04-28T11:52:52Z

dwc3-sti-glue has been broken since MISC uclass has been modified to scan DT sub-nodes after bind. Fixing it by a using the no-op uclass. Signed-off-by: Patrice Chotard

usb: host: dwc2: add trace to have clean usb start

2020-04-28T11:52:52Z

Solve issue for the display of "usb start" command on stm32mp1 because one carriage return is missing in DWC2 probe. Before the patch: STM32MP> usb start starting USB... Bus usb-otg@49000000: Bus usbh-ehci@5800d000: USB EHCI 1.00 after the patch: STM32MP> usb start starting USB... Bus usb-otg@49000000: USB DWC2 Bus usbh-ehci@5800d000: USB EHCI 1.00 Signed-off-by: Patrick Delaunay

usb: host: dwc2: force reset assert

2020-04-28T11:52:52Z

Assert reset before deassert in dwc2_reset; this patch solve issues when the DWC2 registers are already initialized with value incompatible with host mode. Force a hardware reset of the IP reset all the DWC2 registers at default value, the host driver start with a clean state (Core Soft reset doen in dwc_otg_core_reset is not enought to reset all register). The error can occurs in U-Boot when DWC2 device gadget driver force device mode (called by ums or dfu command, before to execute the usb start command). Signed-off-by: Patrick Delaunay

usb: host: dwc2: add clk support

2020-04-28T11:52:52Z

Add support for clock with driver model. This patch don't added dependency because when CONFIG_CLK is not activated the clk function are stubbed. Reviewed-by: Simon Goldschmidt Signed-off-by: Patrick Delaunay

usb: host: dwc2: add phy support

2020-04-28T11:52:52Z

Use generic phy to initialize the PHY associated to the DWC2 device and available in the device tree. This patch don't added dependency because when CONFIG_PHY is not activated, the generic PHY function are stubbed. Reviewed-by: Simon Goldschmidt Signed-off-by: Patrick Delaunay

usb: avoid NULL check before free

2020-04-28T11:52:52Z

The free() function checks if the argument is NULL. Do not duplicate this check. Signed-off-by: Heinrich Schuchardt

drivers: usb: host: Add BRCM xHCI driver

2020-04-13T11:48:41Z

Base driver for Broadcom xHCI controllers Signed-off-by: Bharat Kumar Reddy Gooty Signed-off-by: Rayagonda Kokatanur Signed-off-by: Vladimir Olovyannikov