u-boot.git/drivers/usb/host, branch v2022.10Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/drivers/usb/host?h=v2022.102022-09-25T23:49:36Zusb: host: nuvoton: Add nuvoton NPCM7xx ehci/ohci driver2022-09-25T23:49:36ZJim Liujim.t90615@gmail.com2022-06-21T09:09:02Zurn:sha1:693765a720ba4f116923372deb0c32488f031cf8
Add nuvoton BMC NPCM750 ehci/ohci driver
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Convert CONFIG_SYS_FSL_QMAN_V3 et al to Kconfig2022-08-12T20:10:49ZTom Rinitrini@konsulko.com2022-08-01T01:08:29Zurn:sha1:ff4e87c030bd62d643b0cbd86e7ff893caa97d1b
This converts the following to Kconfig:
CONFIG_FSL_NGPIXIS
CONFIG_SYS_FSL_QMAN_V3
CONFIG_SYS_FSL_RAID_ENGINE
CONFIG_SYS_FSL_RMU
CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
CONFIG_SYS_FSL_SRIO_LIODN
CONFIG_SYS_FSL_TBCLK_DIV
CONFIG_SYS_FSL_USB1_PHY_ENABLE
CONFIG_SYS_FSL_USB2_PHY_ENABLE
CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
Signed-off-by: Tom Rini <trini@konsulko.com>
usb: ehci-mx6: Remove MX6Q_ARM2 related ifdefery2022-07-25T13:08:23ZFabio Estevamfestevam@denx.de2022-05-19T12:13:58Zurn:sha1:96e85ba0c202f77adac5c781b9de7e378efbb7b8
The imx6q arm2 board support has been removed from U-Boot
as it did not get converted to DM.
Remove the MX6Q_ARM2 related ifdefery in the driver.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Merge https://source.denx.de/u-boot/custodians/u-boot-usb2022-07-14T15:10:49ZTom Rinitrini@konsulko.com2022-07-14T15:10:49Zurn:sha1:54f683dbfb8b0777ee4d0ba00872da33e54c98fausb: xhci-mtk: add support for MediaTek MT7621 SoC2022-07-13T21:03:37ZWeijie Gaoweijie.gao@mediatek.com2022-05-20T03:22:56Zurn:sha1:5ac88d1b0122303a9f6e250d3711f144bc61e72f
This patch makes xhci-mtk driver available for MediaTek MT7621 SoC
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
usb: common: move urb code to common2022-07-12T19:59:54ZRui Miguel Silvarui.silva@linaro.org2022-06-29T10:06:14Zurn:sha1:b2d2b7872249e6816487e95bd9197a9417aa62bb
Move urb code from musb only use to a more common scope, so other
drivers in the future can use the handling of urb in usb.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Merge branch 'next'2022-07-11T18:58:57ZTom Rinitrini@konsulko.com2022-07-11T14:18:13Zurn:sha1:36b661dc919da318c163a45f4a220d2e3d9db608usb: ohci-hcd: Remove some unused legacy code2022-07-07T13:29:08ZTom Rinitrini@konsulko.com2022-06-25T15:02:32Zurn:sha1:dea25842ab72427fde250992da1d29c2fbc256f8
At this point, the only user of ohci-hcd that also uses PCI is using DM,
so we can drop CONFIG_PCI_OHCI* usage. No platforms set either of
CONFIG_SYS_USB_OHCI_BOARD_INIT or CONFIG_SYS_USB_OHCI_CPU_INIT so those
hooks can be removed as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_USB_OHCI_NEW et al to Kconfig2022-07-07T13:29:08ZTom Rinitrini@konsulko.com2022-06-25T15:02:31Zurn:sha1:cd6a45a41fb2c19884ac87afade87b4d53601929
This converts the following to Kconfig:
CONFIG_SYS_OHCI_SWAP_REG_ACCESS
CONFIG_SYS_USB_OHCI_CPU_INIT
CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS
CONFIG_SYS_USB_OHCI_SLOT_NAME
CONFIG_USB_ATMEL
CONFIG_USB_ATMEL_CLK_SEL_PLLB
CONFIG_USB_ATMEL_CLK_SEL_UPLL
CONFIG_USB_OHCI_LPC32XX
CONFIG_USB_OHCI_NEW
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_USB_XHCI_EXYNOS et al to Kconfig2022-07-07T13:29:08ZTom Rinitrini@konsulko.com2022-06-11T03:03:00Zurn:sha1:abba59f1155aa45daf37c59e248164387482a3c4
This converts the following to Kconfig:
CONFIG_USB_XHCI_EXYNOS
CONFIG_USB_EHCI_EXYNOS
Signed-off-by: Tom Rini <trini@konsulko.com>