<feed xmlns='http://www.w3.org/2005/Atom'>
<title>u-boot.git/drivers/usb/ulpi/ulpi.c, branch master</title>
<subtitle>Unnamed repository; edit this file 'description' to name the repository.
</subtitle>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/'/>
<entry>
<title>usb: ulpi: Incorrect operator used</title>
<updated>2025-10-28T15:33:15+00:00</updated>
<author>
<name>Andrew Goodbody</name>
<email>andrew.goodbody@linaro.org</email>
</author>
<published>2025-09-30T16:06:44+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=dd01b0541be38894c05f0dad2dad135ef1a9da6b'/>
<id>dd01b0541be38894c05f0dad2dad135ef1a9da6b</id>
<content type='text'>
Combining two bits into a mask to be used so that the same write code
can be used to set or reset bits in a register clearly needs to use the
binary 'or' operator, not the binary 'and'. Fix it.

This issue was found by Smatch.

Signed-off-by: Andrew Goodbody &lt;andrew.goodbody@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Combining two bits into a mask to be used so that the same write code
can be used to set or reset bits in a register clearly needs to use the
binary 'or' operator, not the binary 'and'. Fix it.

This issue was found by Smatch.

Signed-off-by: Andrew Goodbody &lt;andrew.goodbody@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"</title>
<updated>2024-05-20T19:35:03+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2024-05-20T19:35:03+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=03de305ec48b0bb28554372abb40ccd46dbe0bf9'/>
<id>03de305ec48b0bb28554372abb40ccd46dbe0bf9</id>
<content type='text'>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman &lt;jonas@kwiboo.se&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman &lt;jonas@kwiboo.se&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""</title>
<updated>2024-05-19T14:16:36+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2024-05-19T02:20:43+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=d678a59d2d719da9e807495b4b021501f2836ca5'/>
<id>d678a59d2d719da9e807495b4b021501f2836ca5</id>
<content type='text'>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman &lt;jonas@kwiboo.se&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman &lt;jonas@kwiboo.se&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>usb: Remove &lt;common.h&gt; and add needed includes</title>
<updated>2024-05-07T14:00:56+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2024-05-02T01:31:30+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=12a8b0dcaec239c53bc69b3df0abc0f4d5454309'/>
<id>12a8b0dcaec239c53bc69b3df0abc0f4d5454309</id>
<content type='text'>
Remove &lt;common.h&gt; from this driver directory and when needed
add missing include files directly.

Reviewed-by: Mattijs Korpershoek &lt;mkorpershoek@baylibre.com&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Remove &lt;common.h&gt; from this driver directory and when needed
add missing include files directly.

Reviewed-by: Mattijs Korpershoek &lt;mkorpershoek@baylibre.com&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>global: Finish CONFIG -&gt; CFG migration</title>
<updated>2023-01-20T17:27:24+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2023-01-10T16:19:45+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=6e7df1d151a7a127caf3b62ff6dfc003fc2aefcd'/>
<id>6e7df1d151a7a127caf3b62ff6dfc003fc2aefcd</id>
<content type='text'>
At this point, the remaining places where we have a symbol that is
defined as CONFIG_... are in fairly odd locations. While as much dead
code has been removed as possible, some of these locations are simply
less obvious at first. In other cases, this code is used, but was
defined in such a way as to have been missed by earlier checks.  Perform
a rename of all such remaining symbols to be CFG_... rather than
CONFIG_...

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
At this point, the remaining places where we have a symbol that is
defined as CONFIG_... are in fairly odd locations. While as much dead
code has been removed as possible, some of these locations are simply
less obvious at first. In other cases, this code is used, but was
defined in such a way as to have been missed by earlier checks.  Perform
a rename of all such remaining symbols to be CFG_... rather than
CONFIG_...

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>common: Drop linux/delay.h from common header</title>
<updated>2020-05-19T01:19:23+00:00</updated>
<author>
<name>Simon Glass</name>
<email>sjg@chromium.org</email>
</author>
<published>2020-05-10T17:40:11+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=c05ed00afb95fa5237f16962fccf5810437317bf'/>
<id>c05ed00afb95fa5237f16962fccf5810437317bf</id>
<content type='text'>
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>common: Drop log.h from common header</title>
<updated>2020-05-19T01:19:18+00:00</updated>
<author>
<name>Simon Glass</name>
<email>sjg@chromium.org</email>
</author>
<published>2020-05-10T17:40:05+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=f7ae49fc4f363a803dab3be078e93ead8e75a8e9'/>
<id>f7ae49fc4f363a803dab3be078e93ead8e75a8e9</id>
<content type='text'>
Move this header out of the common header.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move this header out of the common header.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>SPDX: Convert all of our single license tags to Linux Kernel style</title>
<updated>2018-05-07T13:34:12+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2018-05-06T21:58:06+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=83d290c56fab2d38cd1ab4c4cc7099559c1d5046'/>
<id>83d290c56fab2d38cd1ab4c4cc7099559c1d5046</id>
<content type='text'>
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Add GPL-2.0+ SPDX-License-Identifier to source files</title>
<updated>2013-07-24T13:44:38+00:00</updated>
<author>
<name>Wolfgang Denk</name>
<email>wd@denx.de</email>
</author>
<published>2013-07-08T07:37:19+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=1a4596601fd395f3afb8f82f3f840c5e00bdd57a'/>
<id>1a4596601fd395f3afb8f82f3f840c5e00bdd57a</id>
<content type='text'>
Signed-off-by: Wolfgang Denk &lt;wd@denx.de&gt;
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini &lt;trini@ti.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Wolfgang Denk &lt;wd@denx.de&gt;
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini &lt;trini@ti.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>usb: ulpi: add indicator configuration function</title>
<updated>2012-10-15T18:54:01+00:00</updated>
<author>
<name>Lucas Stach</name>
<email>dev@lynxeye.de</email>
</author>
<published>2012-09-30T22:44:34+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=141288b3a3249b79a168988c7d9e9ce817013d6f'/>
<id>141288b3a3249b79a168988c7d9e9ce817013d6f</id>
<content type='text'>
Allows for easy configuration of the VBUS indicator related ULPI
config bits.

Also move the external indicator setup from ulpi_set_vbus() to
the new function.

Signed-off-by: Lucas Stach &lt;dev@lynxeye.de&gt;
Acked-by: Igor Grinberg &lt;grinberg@compulab.co.il&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Allows for easy configuration of the VBUS indicator related ULPI
config bits.

Also move the external indicator setup from ulpi_set_vbus() to
the new function.

Signed-off-by: Lucas Stach &lt;dev@lynxeye.de&gt;
Acked-by: Igor Grinberg &lt;grinberg@compulab.co.il&gt;
</pre>
</div>
</content>
</entry>
</feed>
