u-boot.git/drivers/usb, branch v2014.10-rc2

USB: gadget: s3c: get rid of debug compile warning

2014-09-02T12:32:15Z

When enable debug option to compile, it will give the following warning, this patch is used to get rid of it. --->8--- warning: 'flags' is used uninitialized in this function [-Wuninitialized] ---8<--- Signed-off-by: Bo Shen

USB: gadget: atmel: get rid of debug compile warning

2014-09-02T12:32:15Z

usb: ci_udc: implement dfu_usb_get_reset

2014-09-02T12:29:28Z

This allows the USB code to determine whether a USB bus reset was issued, which in turn allows the code to differentiate between a detach (return to shell prompt) and a board reset/reboot request. Signed-off-by: Stephen Warren

udc: dfu: s3c_udc: Provide function to check if USB reset was asserted

2014-09-02T12:29:28Z

New dfu_usb_get_reset() method is necessary to distinct two different use cases of dfu-util program. This method checks if the USB bus reset has been really performed after DFU DETACH. Without this function the previous DFU behavior is preserved. Signed-off-by: Lukasz Majewski

dfu: Provide means to find difference between dfu-util -e and -R

2014-09-02T12:29:28Z

This commit provides distinction between DFU device detach and reset. The -R behavior is preserved with proper handling of the dfu-util's -e switch, which detach the DFU device. By running dfu-util -e; one can force device to finish the execution of dfu command on target and execute some other scripted commands. Moreover, some naming has been changed - the dfu_reset() method now is known as dfu_detach(). New name better reflects the purpose of the code. It was also necessary to increase the number of usb_gadget_handle_interrupts() calls since we also must wait for detection of the USB reset event. Example usage: 1. -e (detach) switch dfu-util -a0 -D file1.bin;dfu-util -a3 -D uImage;dfu-util -e access to u-boot prompt. 2. -R (reset) switch dfu-util -a0 -D file1.bin;dfu-util -R -a3 -D uImage target board reset Signed-off-by: Lukasz Majewski Reviewed-by: Stephen Warren Tested-by: Stephen Warren

Merge branch 'master' of git://git.denx.de/u-boot-arm

2014-08-28T17:03:25Z

lib, linux: move linux specific defines to linux/compat.h

2014-08-25T23:25:03Z

- move linux specific defines from usb and video code into linux/compat.h - move common linux specific defines from include/ubi_uboot.h to linux/compat.h - add for new mtd/ubi/ubifs sync new needed linux specific defines to linux/compat.h Signed-off-by: Heiko Schocher Cc: Marek Vasut Cc: Anatolij Gustschin [trini: Add spin_lock_irqsave/spin_unlock_irqrestore dummies from usb/lin_gadet_compat.h] Signed-off-by: Tom Rini

omap: remove omap5912osk board support

2014-08-21T16:01:12Z

Emails to the board maintainer "Rishi Bhattacharya " have been bouncing. Tom suggested to remove this board. Remove also omap1510_udc.c because this is the last board to enable it. Signed-off-by: Masahiro Yamada Suggested-by: Tom Rini

omap: clean-up dead configs

2014-08-09T15:17:04Z

The following configs are not defined at all. - CONFIG_OMAP1510 - CONFIG_OMAP_1510P1 - CONFIG_OMAP_SX1 - CONFIG_OMAP3_DMA - CONFIG_OMAP3_ZOOM2 - CONFIG_OMAP_INNOVATOR Signed-off-by: Masahiro Yamada Cc: Tom Rini

usb: ehci: rmobile: Remove xHCI address

2014-08-09T15:17:01Z

echi-rmobile does not support xHCI. This removes xHCI address from address table. And this revise a value of CONFIG_USB_MAX_CONTROLLER_COUNT for lager board and koelsh board. Signed-off-by: Nobuhiro Iwamatsu