u-boot.git/drivers/usb, branch v2016.11-rc2

net: smsc95xx: fix DM MAC address reading

2016-10-13T17:25:40+00:00

eth-uclass.c expects DM-capable Ethernet adapters to implement ops->
read_rom_hwaddr(), or for some other mechanism to set pdata->enetaddr, or
for the user to set environment variable $usbethaddr. Without any of
these, it will refuse to initialize the device since no valid MAC address
is known. Implement this function for the smsc95xx driver.

With this feature implemented, there is no point smsc95xx_init_common()
re-reading the MAC address from ROM, so ifdef out this code when DM_ETH
is enabled.

This allows (at least) the built-in Ethernet on the NVIDIA Harmony board
to operate again.

Fixes: 0990fcb77219 ("net: smsc95xx: Add driver-model support")
Signed-off-by: Stephen Warren 
Acked-by: Joe Hershberger

usb: pci: Fix cast for 64-bit compilation

2016-10-11T03:55:33+00:00

Fix a cast that causes warnings on 64-bit machines.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

Merge branch 'master' of git://git.denx.de/u-boot-usb

2016-10-01T01:58:44+00:00

Signed-off-by: Tom Rini 

Conflicts:
	include/configs/dra7xx_evm.h

mpc85xx: powerpc: usb: Update the list of Socs afftected by erratum A006261

2016-09-28T16:08:16+00:00

Apply the erratum A006261 for the following Socs:
P2041 rev 2.0, P2040 rev 2.0, P5040 rev 2.0, 2.1

Do not apply erratum A006261 for the following Socs:
T4160, T4080, T1040, T1042, T1020, T1022, T2080, T2081

Erratum A006261 is applicable for the following Socs:
P1010(1.0, 2.0), P2041(1.0, 1.1, 2.0, 2.1), P2040(1.0, 1.1, 2.0, 2.1),
P3041(1.0, 1.1, 2.0, 2.1), P5010(1.0, 2.0), P5020(1.0, 2.0),
P5021(1.0, 2.0), T4240(1.0, 2.0), P5040(1.0,2.0,2.1).

Signed-off-by: Sriram Dash 
Signed-off-by: Rajesh Bhagat 
Reviewed-by: York Sun

drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller

2016-09-27T21:30:49+00:00

Currently the controller by default enables the Receive Detect feature in P3
mode in USB 3.0 PHY. However, USB 3.0 PHY does not reliably support receive
detection in P3 mode.
Enabling the USB3 controller to configure USB in P2 mode whenever the Receive
Detect feature is required.

Signed-off-by: Sriram Dash 
Signed-off-by: Rajesh Bhagat

usb: fsl: Renaming fdt_fixup_erratum and fdt_fixup_usb_erratum

2016-09-27T21:30:27+00:00

The functions fdt_fixup_erratum and fdt_fixup_usb_erratum are
fsl/nxp specific. So, make them explicit by renaming them
fsl_fdt_fixup_erratum and fsl_fdt_fixup_usb_erratum

Signed-off-by: Sriram Dash

usb: fsl: Rename fdt_fixup_dr_usb

2016-09-27T21:30:27+00:00

The function fdt_fixup_dr_usb is specific to fsl/nxp. So,
make the function name explicit and rename fdt_fixup_dr_usb
into fsl_fdt_fixup_dr_usb.

Signed-off-by: Sriram Dash

usb: host: ehci-vf: Migrate Vybrid USB to driver model

2016-09-27T21:30:22+00:00

Add driver model support for Vybrid USB driver.

Signed-off-by: Sanchayan Maity

drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests

2016-09-27T21:30:16+00:00

This is required for better performance, and performs below tuning:
1. Enable burst length set, and define it as 4/8/16.
2. Set burst request limit to 16 requests.

Signed-off-by: Rajesh Bhagat 
Signed-off-by: Sriram Dash

net: asix: Fix ASIX 88772B with driver model

2016-09-27T21:30:14+00:00

Commit 147271209a9d ("net: asix: fix operation without eeprom")
added a special handling for ASIX 88772B that enable another
type of header. This break the driver in DM mode as the extra handling
needed in the receive path is missing.

However this new header mode is not required and only seems to
increase the code complexity, so this patch revert this part of
commit 147271209a9d.

This also reverts commit 41d1258aceb45b45f9e68f67a9c40f0afbc09dc9
("net: asix: Fix AX88772B when used with DriverModel") of late.

Fixes: 147271209a9d ("net: asix: fix operation without eeprom")

Signed-off-by: Alban Bedel 
Signed-off-by: Marcel Ziswiler