u-boot.git/drivers/usb, branch v2018.05-rc2

usb: host: dwc3: Add support for multiple PHYs

2018-04-11T15:22:07Z

DWC3 Ips can have more than 1 PHY for USB2 and 1 PHY for USB3, add support for a generic number of PHYs and adapt the code to handle a generic number of PHYs. Signed-off-by: Neil Armstrong

usb: host: Add simple of glue driver for DWC3 USB Controllers integration

2018-04-11T15:22:07Z

This is a port of the dwc3-of-simple driver from Linux to enable/deassert clock and resets of a simple DWC3 Controller HW glue. Signed-off-by: Neil Armstrong

net: Move enetaddr env access code to env config instead of net config

2018-04-09T03:00:58Z

In order that we can use eth_env_* even when CONFIG_NET isn't set, move these functions to environment code from net code. This fixes failures such as: board/ti/am335x/built-in.o: In function `board_late_init': board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr' u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr' which caters for use cases such as: commit f411b5cca48f ("board: am335x: Always set eth/eth1addr environment variable") when Ethernet is required in Linux, but not U-Boot. Signed-off-by: Alex Kiernan

usb: gadget: USB_ETHER requires network support

2018-04-09T03:00:58Z

In order to compile the USB Ethernet gadget support we require that NET is enabled, add that dependency here. Signed-off-by: Alex Kiernan Acked-by: Joe Hershberger

usb: rockchip: remove duplicate assignement.

2018-03-28T21:30:31Z

Assigning f_rkusb->reboot_flag twice doesn't make sense. Signed-off-by: Heinrich Schuchardt Acked-by: Philipp Tomsich Reviewed-by: Philipp Tomsich

lan7xxx: Require phylib

2018-03-22T20:05:31Z

The lan75xx and lan78xx drivers need to drive their phy via the generic phylib framework. Let's reflect that dependency in Kconfig, so that we don't get build errors when phylib does not get selected. Signed-off-by: Alexander Graf Acked-by: Joe Hershberger

usb: dwc2: Replace printf, pr_err by dev_info, dev_err

2018-03-17T02:23:09Z

Replace printf() call by dev_info() and pr_err() by dev_err() Signed-off-by: Patrice Chotard

usb: dwc2: increase timeout in wait_for_chhltd

2018-03-17T02:23:09Z

This patch increases timeout to 2s. It was seen on 2 USB devices (Verbatim STORE N GO 070B4AED0FB22358 and USB DISK 2.0 9000729BA41DDF40) that the request sense command takes between 1.3s and and 1.5s. Signed-off-by: Christophe Kerello Signed-off-by: Patrice Chotard

usb: dwc2: disable external vbus supply when the device is removed

2018-03-17T02:23:09Z

This patch adds an interface to disable the power in dwc2 driver. This new interface is called when the device is removed. Signed-off-by: Christophe Kerello Signed-off-by: Patrice Chotard

usb: ohci-generic: replace pr_err() by dev_err()

2018-03-17T02:20:53Z

As we get access to struct udevice, use dev_err() instead of pr_err(). Signed-off-by: Patrice Chotard