u-boot.git/drivers/usb, branch v2019.07-rc2

usb: ohci: ohci-da8xx: Cleanup Error handling and fix flags

2019-05-09T23:52:55Z

Per feedback from Marek, he suggested better handling and to enable DM_FLAG_OS_PREPARE, this patch re-orders some of the error checking, and errors returns the error code right away and also sets DM_FLAG_OS_PREPARE. Signed-off-by: Adam Ford

usb: dwc3: Add Meson G12A USB Glue

2019-05-09T08:38:32Z

Adds support for Amlogic G12A USB Control Glue HW. The Amlogic G12A SoC Family embeds 2 USB Controllers : - a DWC3 IP configured as Host for USB2 and USB3 - a DWC2 IP configured as Peripheral USB2 Only A glue connects these both controllers to 2 USB2 PHYs, and optionnally to an USB3+PCIE Combo PHY shared with the PCIE controller. The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including routing of the OTG PHY between the DWC3 and DWC2 controllers, and setups the on-chip OTG mode selection for this PHY. This driver sets the OTG capable port as Host mode by default, the switch to Device mode is to be done in a separate patch. Signed-off-by: Neil Armstrong Reviewed-by: Marek Vasut

usb: ohci: ohci-da8xx: Enable da850-ohci driver with DM support

2019-05-05T12:48:50Z

This patch reuses some former code for the hawkboard, combines it with some some similar DM_USB compatible code for the OHCI driver, and enables the use of the da850's OHCI controller with DM_USB compatibility. Signed-off-by: Adam Ford

usb: musb_hcd: remove unnecessary ifdefs for dm* SoCs

2019-05-04T17:04:09Z

The support for DaVinci DM* SoCs has been dropped. The ifdefs in the musb_hcd driver are no longer needed. Remove them. Signed-off-by: Bartosz Golaszewski Acked-by: Marek Vasut

Merge git://git.denx.de/u-boot-usb

2019-05-03T18:22:38Z

- DaVinci updates

usb: ohci: Re-enable commented out delay

2019-05-03T15:14:49Z

There is a delay function that was commented out. This patch re-enables it, because it will be needed for da850 ohci support. Signed-off-by: Adam Ford

Merge tag 'rockchip-for-2019.07' of git://git.denx.de/u-boot-rockchip

2019-05-01T15:52:04Z

Improvements and new features: - improved SPI driver for better read throughput - refactors initialisation of debug UART init - restructures header file paths - adds pinctrl improvements Adds Kever as a co-custodian.

rockchip: use 'arch-rockchip' as header file path

2019-04-30T22:00:05Z

Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common header file path, so that we can get the correct path directly. Signed-off-by: Kever Yang Reviewed-by: Philipp Tomsich

Convert CONFIG_USB_EHCI_MX5 to Kconfig

2019-04-25T15:03:25Z

This converts the following to Kconfig: CONFIG_USB_EHCI_MX5 Signed-off-by: Lukasz Majewski

USB: DM: Convert i.MX5 ehci code to driver model

2019-04-25T15:03:25Z

This commit converts i.MX5's EHCI USB host driver to driver model (DM_USB). It is a straightforward conversion (to reuse as much code as possible), based on ehci-mx6.c code. Signed-off-by: Lukasz Majewski