u-boot.git/drivers/usb, branch v2020.04-rc2

dm: core: Create a new header file for 'compat' features

2020-02-06T02:33:46+00:00

At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass

dm: core: Require users of devres to include the header

2020-02-06T02:33:46+00:00

At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass 
Reviewed-by: Anatolij Gustschin

Merge tag 'rpi-next-2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi

2020-02-05T12:18:12+00:00

- DFU support file operations lager then the default max size
- add dfu support to dwc2 for bcm2835
- enable DFU for RPi4
- Fix RPi4 memory map to include the genet device
- add driver for the genet ethernet device
- enable network support in RPi4 config

usb: cdns3: ep0: Invalidate cache before reading Setup Packet

2020-02-02T17:19:52+00:00

Invalidate dcache line before accessing Setup Packet contents. Otherwise
driver will see stale content on non coherent architecture.

Signed-off-by: Vignesh Raghavendra

usb: dwc2_udc_otg: add bcm2835 SoC (Raspberry Pi4) support

2020-01-29T17:30:33+00:00

Broadcom 2835 SoC requires special conversion of physical memory addresses
for DMA purpose, so add needed wrappers to dwc2_udc_otg driver. Also extend
the list of compatible devices with 'brcm,bcm2835-usb' entry. This allows
to use USB gadget drivers (i.e. DFU) on Raspberry Pi4 boards.

Signed-off-by: Marek Szyprowski 
Reviewed-by: Lukasz Majewski 
Signed-off-by: Matthias Brugger

usb: musb-new: mt85xx: add musb-new gadget driver.

2020-01-25T17:04:36+00:00

Using musb-new structure for mt85xx gadget driver.
Add gadget driver dts for mt8518 SoCs.

Signed-off-by: mingming lee

Merge tag '2020-01-20-ti-2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti

2020-01-20T19:54:55+00:00

K3 J721E:
* DMA support.
* MMC and ADMA support.
* EEPROM support.
* J721e High Security EVM support.
* USB DT nodes

K3 AM654:
* Fixed boot due to pmic probe error.
* USB support and DT nodes.
* ADMA support

DRA7xx/AM57xx:
* BBAI board support
* Clean up of net platform code under board/ti

AM33/AM43/Davinci:
* Reduce SPL size for omap3 boards.
* SPL DT support for da850-lcdk
* PLL divider fix for AM335x

dwc3-generic: Add support for AM654 USB controller

2020-01-20T04:40:29+00:00

AM654 has DWC3 USB controller that is very similar to other TI SoCs. Add
a new compatible to enable the same.

Signed-off-by: Vignesh Raghavendra 
Reviewed-by: Marek Vasut 
Signed-off-by: Lokesh Vutla

common: Move hang() to the same header as panic()

2020-01-17T22:53:40+00:00

At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.

Signed-off-by: Simon Glass 
[trini: Migrate a few more files]
Signed-off-by: Tom Rini

common: Rename and move source()

2020-01-17T19:02:35+00:00

This function has a very generic name which does not adequately describe
its purpose. Rename it and move it to image.h, since it relates to reading
a script from an image.

Signed-off-by: Simon Glass