u-boot.git/drivers/usb, branch v2020.04-rc3

dma-mapping: move dma_map_(un)single() to

2020-02-19T13:27:30Z

The implementation of dma_map_single() and dma_unmap_single() is exactly the same for all the architectures that support them. Factor them out to , and make all drivers to include instead of . If we need to differentiate them for some architectures, we can move the generic definitions to . Add some comments to the helpers. The concept is quite similar to the DMA-API of Linux kernel. Drivers are agnostic about what is going on behind the scene. Just call dma_map_single() before the DMA, and dma_unmap_single() after it. Signed-off-by: Masahiro Yamada

dma-mapping: fix the prototype of dma_unmap_single()

2020-02-19T13:27:30Z

dma_unmap_single() takes the dma address, not virtual address. Signed-off-by: Masahiro Yamada

dm: core: Create a new header file for 'compat' features

2020-02-06T02:33:46Z

At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass

dm: core: Require users of devres to include the header

2020-02-06T02:33:46Z

At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass Reviewed-by: Anatolij Gustschin

Merge tag 'rpi-next-2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi

2020-02-05T12:18:12Z

- DFU support file operations lager then the default max size - add dfu support to dwc2 for bcm2835 - enable DFU for RPi4 - Fix RPi4 memory map to include the genet device - add driver for the genet ethernet device - enable network support in RPi4 config

usb: cdns3: ep0: Invalidate cache before reading Setup Packet

2020-02-02T17:19:52Z

Invalidate dcache line before accessing Setup Packet contents. Otherwise driver will see stale content on non coherent architecture. Signed-off-by: Vignesh Raghavendra

usb: dwc2_udc_otg: add bcm2835 SoC (Raspberry Pi4) support

2020-01-29T17:30:33Z

Broadcom 2835 SoC requires special conversion of physical memory addresses for DMA purpose, so add needed wrappers to dwc2_udc_otg driver. Also extend the list of compatible devices with 'brcm,bcm2835-usb' entry. This allows to use USB gadget drivers (i.e. DFU) on Raspberry Pi4 boards. Signed-off-by: Marek Szyprowski Reviewed-by: Lukasz Majewski Signed-off-by: Matthias Brugger

usb: musb-new: mt85xx: add musb-new gadget driver.

2020-01-25T17:04:36Z

Using musb-new structure for mt85xx gadget driver. Add gadget driver dts for mt8518 SoCs. Signed-off-by: mingming lee

Merge tag '2020-01-20-ti-2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti

2020-01-20T19:54:55Z

K3 J721E: * DMA support. * MMC and ADMA support. * EEPROM support. * J721e High Security EVM support. * USB DT nodes K3 AM654: * Fixed boot due to pmic probe error. * USB support and DT nodes. * ADMA support DRA7xx/AM57xx: * BBAI board support * Clean up of net platform code under board/ti AM33/AM43/Davinci: * Reduce SPL size for omap3 boards. * SPL DT support for da850-lcdk * PLL divider fix for AM335x

dwc3-generic: Add support for AM654 USB controller

2020-01-20T04:40:29Z

AM654 has DWC3 USB controller that is very similar to other TI SoCs. Add a new compatible to enable the same. Signed-off-by: Vignesh Raghavendra Reviewed-by: Marek Vasut Signed-off-by: Lokesh Vutla