u-boot.git/drivers/usb, branch v2021.10-rc2

pci: usb: ohci: Test on PCI not DM_PCI

2021-08-05T23:45:54Z

Now that DM_PCI is always enabled, check on CONFIG_PCI instead. Signed-off-by: Simon Glass [trini: Update for non-PCI users of this code, reword] Signed-off-by: Tom Rini

global: Convert simple_strtoul() with decimal to dectoul()

2021-08-02T17:32:14Z

It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass

Rename SPL_USB_HOST_SUPPORT to SPL_USB_HOST

2021-07-28T18:27:54Z

Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass

usb: Enforce DM_USB migration for USB_HOST devices.

2021-07-19T01:05:31Z

As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut Cc: Icenowy Zheng Cc: Samuel Holland Cc: FUKAUMI Naoki Cc: Andre Przywara Cc: Jagan Teki Signed-off-by: Tom Rini

usb: musb-new: Add glue driver for ST-Ericsson Ux500

2021-07-14T20:48:16Z

The ST-Ericsson DB8500 SoC contains a MUSB OTG controller which supports both host and gadget mode. For some reason there is nothing special about it - add a simple glue driver for Ux500 that literally just sets up MUSB together with a generic PHY. There are no SoC-specific registers etc needed to make USB work. The new Ux500 glue driver is only tested to work with DM_USB and DM_USB_GADGET. Both host and gadget mode work fine on the u8500 "stemmy" board that is already present in U-Boot. Reviewed-by: Linus Walleij Signed-off-by: Stephan Gerhold

arm: Remove spear600 boards and the rest of SPEAr support

2021-07-08T02:22:42Z

These boards have not been converted to CONFIG_DM_USB by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the last of the SPEAr platforms, so remove the rest of the remaining support as well. Cc: Vipin Kumar Signed-off-by: Tom Rini

dm: define LOG_CATEGORY for all uclass

2021-07-06T16:38:03Z

Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay Reviewed-by: Simon Glass

usb: ehci-mx6: Do not fail when 'reg' is not found

2021-06-24T18:23:23Z

Unlike imx6, on imx7 the USB PHY is described as: usbphynop1: usbphynop1 { compatible = "usb-nop-xceiv"; clocks = <&clks IMX7D_USB_PHY1_CLK>; clock-names = "main_clk"; #phy-cells = <0>; }; which does not have the 'reg' property. Do not return an error when the 'reg' property is not found for the USB PHY. This fixes USB gadget regression on a imx7s-warp board. Successfully tested the "ums 0 mmc 0" command on two boards: imx7s-warp and imx6dl-pico-pi. Signed-off-by: Fabio Estevam

usb: ehci-mx6: Move fdtdec_get_alias_seq() inside the CONFIG_MX6

2021-06-24T18:23:23Z

On a imx7s-warp board the fdtdec_get_alias_seq() function always fails. As priv->portnr is only used on i.MX6, move fdtdec_get_alias_seq() inside the CONFIG_MX6 block. Signed-off-by: Fabio Estevam

Merge tag 'u-boot-imx-20210616' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

2021-06-16T15:18:11Z

u-boot-imx-20210616 ------------------- - imxrt : fixes, USB, imxrt1020-evk - imx8m: fix for verdin-imx8mm Add conga-QMX8 board - imx6 : documentation for pico-imx6: Add SeeedStudio NPI-IMX6ULL Support ventana: DM PCI - imx7d: added SMEGW01 board CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7765