u-boot.git/drivers/usb, branch v2022.01-rc1

usb: xhci-brcm: Include header file needed for dev_err

2021-10-30T20:54:57Z

dev_err seems to be moved to different header file. Include dm/device_compat.h file to compile properly. Fixes: 69dae8902b16 ("linux/compat.h: Remove redefinition of dev_xxx macros") Signed-off-by: Stefan Agner

Convert CONFIG_USB_EHCI_IS_TDI to Kconfig

2021-10-15T13:42:22Z

On mvebu this is defined if and only if !ARM64. Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300). Signed-off-by: Marek Behún

Convert CONFIG_USB_EHCI_MXS to Kconfig

2021-10-15T13:42:22Z

This option is only used for mx23evk_defconfig mx23_olinuxino_defconfig which are the only i.MX23 boards. Add depend on ARCH_MX23 and default to y. Signed-off-by: Marek Behún

Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDI

2021-10-15T13:42:22Z

In preparation for moving this option to Kconfig, rename it to be consistent with other USB EHCI Kconfig options. Signed-off-by: Marek Behún

Merge tag 'u-boot-stm32-20211012' of https://source.denx.de/u-boot/custodians/u-boot-stm

2021-10-12T16:01:00Z

- Disable ATAGS for STM32 MCU and MPU boards - Disable bi_boot_params for STM32 MCU and MPU boards - Update stm32-usbphyc node management - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards - Convert some USB config flags to Kconfig for various boards - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board - Remove specific CONFIG_STV0991 flags - Remove unused CONFIG_USER_LOWLEVEL_INIT flag - Add ofdata_to_platdata() callback for stm32_spi driver - Update for stm32f7_i2c driver - Remove gpio_hog_probe_all() from STM32 MP1 board - Fix bind command Signed-off-by: Tom Rini

usb: sandbox: Add gadget callbacks

2021-10-12T12:20:04Z

Add usb_gadget_handle_interrupts(), usb_gadget_register_driver() and usb_gadget_unregister_driver() to be able to test binding usb gadget. Signed-off-by: Patrice Chotard Cc: Marek Vasut Cc: Herbert Poetzl Reviewed-by: Simon Glass

usb: gadget: Add bcdDevice for the DWC2 USB Gadget Controller

2021-10-12T12:20:04Z

Add an entry in usb_gadget_controller_number() for the DWC2 gadget controller. It is used to bind the USB Ethernet driver. Signed-off-by: Patrice Chotard Reported-by: Herbert Poetzl Cc: Marek Vasut Cc: Herbert Poetzl

sunxi: Clean up inclusions of asm/arch/gpio.h

2021-10-11T09:46:44Z

As part of migrating to DM_GPIO and DM_PINCTRL, eventually we will remove the asm/arch/gpio.h header. In preparation, clean up the various files that include it. Some files did not contain any GPIO code at all, so this header was completely unused. A few files contained only legacy platform-specific GPIO code for setting up pin muxes. They were left unchanged, as that code will be completely removed by the DM_PINCTRL migration. The remaining files contain some combination of DM_GPIO and legacy GPIO code. For those, switch to including asm/gpio.h (if it wasn't included already). Right now, this header provides both sets of functions, because ARCH_SUNXI selects GPIO_EXTRA_HEADER. This will still be the right header to include once the DM_GPIO migration is complete and GPIO_EXTRA_HEADER is no longer needed. Signed-off-by: Samuel Holland Reviewed-by: Andre Przywara Signed-off-by: Andre Przywara

usb: dwc3: meson-gxl: add AXG compatible

2021-10-07T08:14:50Z

Upstream Linux uses the "amlogic,meson-axg-usb-ctrl" for AXG SoCs. This adds it to the compatible list for this driver. Reported-by: Vyacheslav Bocharov Signed-off-by: Neil Armstrong Tested-by: Vyacheslav Bocharov

arm: Remove zmx25 board and ARCH_MX25

2021-10-02T01:08:18Z

This board has not been converted to CONFIG_DM by the deadline. Remove it. As this is the last ARCH_MX25 platform, remove those references as well. Cc: Matthias Weisser Cc: Stefano Babic Signed-off-by: Tom Rini