u-boot.git/drivers/usb, branch v2022.10 Unnamed repository; edit this file 'description' to name the repository. Fix out of bound access of ep array. 2022-09-25T23:49:36+00:00 Alison Huffman alisn@google.com 2022-09-22T04:01:32+00:00 206af3dec00071ec96c0fdec6c8dda3a039c07cf When processing USB_REQ_CLEAR_FEATURE, USB_REQ_SET_FEATURE, and USB_REQ_GET_STATUS packets in dwc2_ep0_setup an out of bounds access can occur. This is caused by the wIndex field of the usb control packet being used as an index into an array whose size is DWC2_MAX_ENDPOINTS (4). Signed-off-by: Alison Huffman <alisn@google.com> 
When processing USB_REQ_CLEAR_FEATURE, USB_REQ_SET_FEATURE, and
USB_REQ_GET_STATUS packets in dwc2_ep0_setup an out of bounds access
can occur. This is caused by the wIndex field of the usb control packet
being used as an index into an array whose size is DWC2_MAX_ENDPOINTS (4).

Signed-off-by: Alison Huffman <alisn@google.com>
usb: host: nuvoton: Add nuvoton NPCM7xx ehci/ohci driver 2022-09-25T23:49:36+00:00 Jim Liu jim.t90615@gmail.com 2022-06-21T09:09:02+00:00 693765a720ba4f116923372deb0c32488f031cf8 Add nuvoton BMC NPCM750 ehci/ohci driver Signed-off-by: Jim Liu <JJLIU0@nuvoton.com> 
Add nuvoton BMC NPCM750 ehci/ohci driver

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
usb: gadget: designware-udc: Drop the driver 2022-09-19T15:45:51+00:00 Marek Vasut marex@denx.de 2022-08-23T17:06:50+00:00 c34edb893aca45b81460fc6ce341b4304f08f0f3 This driver is not used by any system and is long unmaintained, drop it. There is a DWC2 OTG driver which is maintained, see CONFIG_USB_GADGET_DWC2_OTG . Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> 
This driver is not used by any system and is long unmaintained, drop it.
There is a DWC2 OTG driver which is maintained, see CONFIG_USB_GADGET_DWC2_OTG .

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
usb: Kconfig: Fix typo in SPL_DM_USB text 2022-09-19T15:45:51+00:00 Fabio Estevam festevam@denx.de 2022-09-17T23:28:29+00:00 c6ab91c77edd3f831ae6ddabd4462bff983fd3fd Change a typo in "USB host mode". Signed-off-by: Fabio Estevam <festevam@denx.de> 
Change a typo in "USB host mode".

Signed-off-by: Fabio Estevam <festevam@denx.de>
drivers: usb: fastboot: Fix full-speed usb descriptor 2022-09-02T11:26:58+00:00 qianfan Zhao qianfanguijin@163.com 2022-08-22T01:18:31+00:00 2522bd3ea67d6e22259cf363eeb3822a358b50d6 The host will report such error message if the fastboot device work in full-speed mode: "Duplicate descriptor for config 1 interface 0 altsetting 0, skipping" Fastboot device ack both full and high speed interface descriptors when work in full-speed mode, that's will cause this issue. Fix it. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: John Keeping <john@metanate.com> 
The host will report such error message if the fastboot device work in
full-speed mode: "Duplicate descriptor for config 1 interface 0
altsetting 0, skipping"

Fastboot device ack both full and high speed interface descriptors when
work in full-speed mode, that's will cause this issue.

Fix it.

Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: John Keeping <john@metanate.com>
Convert CONFIG_SYS_FSL_QMAN_V3 et al to Kconfig 2022-08-12T20:10:49+00:00 Tom Rini trini@konsulko.com 2022-08-01T01:08:29+00:00 ff4e87c030bd62d643b0cbd86e7ff893caa97d1b This converts the following to Kconfig: CONFIG_FSL_NGPIXIS CONFIG_SYS_FSL_QMAN_V3 CONFIG_SYS_FSL_RAID_ENGINE CONFIG_SYS_FSL_RMU CONFIG_SYS_FSL_SINGLE_SOURCE_CLK CONFIG_SYS_FSL_SRIO_LIODN CONFIG_SYS_FSL_TBCLK_DIV CONFIG_SYS_FSL_USB1_PHY_ENABLE CONFIG_SYS_FSL_USB2_PHY_ENABLE CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY Signed-off-by: Tom Rini <trini@konsulko.com> 
This converts the following to Kconfig:
   CONFIG_FSL_NGPIXIS
   CONFIG_SYS_FSL_QMAN_V3
   CONFIG_SYS_FSL_RAID_ENGINE
   CONFIG_SYS_FSL_RMU
   CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
   CONFIG_SYS_FSL_SRIO_LIODN
   CONFIG_SYS_FSL_TBCLK_DIV
   CONFIG_SYS_FSL_USB1_PHY_ENABLE
   CONFIG_SYS_FSL_USB2_PHY_ENABLE
   CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
   CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY

Signed-off-by: Tom Rini <trini@konsulko.com>
usb: ehci-mx6: Remove MX6Q_ARM2 related ifdefery 2022-07-25T13:08:23+00:00 Fabio Estevam festevam@denx.de 2022-05-19T12:13:58+00:00 96e85ba0c202f77adac5c781b9de7e378efbb7b8 The imx6q arm2 board support has been removed from U-Boot as it did not get converted to DM. Remove the MX6Q_ARM2 related ifdefery in the driver. Signed-off-by: Fabio Estevam <festevam@denx.de> 
The imx6q arm2 board support has been removed from U-Boot
as it did not get converted to DM.

Remove the MX6Q_ARM2 related ifdefery in the driver.

Signed-off-by: Fabio Estevam <festevam@denx.de>
arch: mvebu: Disable by default unused peripherals in SPL 2022-07-21T08:14:04+00:00 Pali Rohár pali@kernel.org 2022-05-24T08:58:42+00:00 35ed176af24484dbea064266be75aefdc88d79ec SPL on mvebu loads proper U-Boot from custom Marvell kwbimage format and therefore support for other binary formats is not required to be present in SPL. Boot source of proper U-Boot is defined by compile time options and therefore it is not required to enable all possible and unused peripherals in SPL by default. This change decrease size of SPL binaries. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> 
SPL on mvebu loads proper U-Boot from custom Marvell kwbimage format and
therefore support for other binary formats is not required to be present in
SPL. Boot source of proper U-Boot is defined by compile time options and
therefore it is not required to enable all possible and unused peripherals
in SPL by default.

This change decrease size of SPL binaries.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
musb: sunxi: Allow host-side USB with external VBUS 2022-07-15T12:10:39+00:00 Samuel Holland samuel@sholland.org 2022-07-15T03:34:54+00:00 9674c09b7495d15017b68a3d462b17040c12ff70 Now that the PHY driver will not try to drive VBUS if it is already driven by an external supply, there is no need to check the VBUS voltage before powering on the PHY. Signed-off-by: Samuel Holland <samuel@sholland.org> 
Now that the PHY driver will not try to drive VBUS if it is already
driven by an external supply, there is no need to check the VBUS voltage
before powering on the PHY.

Signed-off-by: Samuel Holland <samuel@sholland.org>
usb: dwc3: add a SPL_USB_DWC3_GENERIC option for the dwc3 driver 2022-07-15T12:10:39+00:00 Angus Ainslie angus@akkea.ca 2022-07-14T15:11:11+00:00 582ce23c7870b93e361083b1578ae45ed61df9b6 Suppress warnings when building the SPL without USB_DWC3_GENERIC Signed-off-by: Angus Ainslie <angus@akkea.ca> 
Suppress warnings when building the SPL without USB_DWC3_GENERIC

Signed-off-by: Angus Ainslie <angus@akkea.ca>