u-boot.git/drivers/usb, branch v2024.01-rc3

tree-wide: Replace http:// link with https:// link for ti.com

2023-11-10T16:01:50Z

Replace instances of http://www.ti.com with https://www.ti.com Signed-off-by: Nishanth Menon

Kconfig: Remove all default n/no options

2023-10-30T19:32:49Z

Similar change was done by commit b4c2c151b14b ("Kconfig: Remove all default n/no options") and again sync is required. default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek Reviewed-by: Svyatoslav Ryhel # tegra Reviewed-by: Tom Rini Reviewed-by: Angelo Dureghello

arm: imx: Check header before calling spl_load_imx_container

2023-10-18T00:50:52Z

Make sure we have an IMX header before calling spl_load_imx_container, since if we don't it will fail with -ENOENT. This allows us to fall back to legacy/raw images if they are also enabled. This is a functional change, one which likely should have been in place from the start, but a functional change nonetheless. Previously, all non-IMX8 images (except FITs without FIT_FULL) would be optimized out if the only image load method enabled supported IMX8 images. With this change, support for other image types now has an effect. There are seven boards with SPL_LOAD_IMX_CONTAINER enabled: three with SPL_BOOTROM_SUPPORT: imx93_11x11_evk_ld imx93_11x11_evk imx8ulp_evk and four with SPL_MMC: deneb imx8qxp_mek giedi imx8qm_mek All of these boards also have SPL_RAW_IMAGE_SUPPORT and SPL_LEGACY_IMAGE_FORMAT enabled as well. However, none have FIT support enabled. Of the six load methods affected by this patch, only SPL_MMC and SPL_BOOTROM_SUPPORT are enabled with SPL_LOAD_IMX_CONTAINER. spl_romapi_load_image_seekable does not support legacy or raw images, so there is no growth. However, mmc_load_image_raw_sector does support loading legacy/raw images. Since these images could not have been booted before, I have disabled support for legacy/raw images on these four boards. This reduces bloat from around 800 bytes to around 200. There are no in-tree boards with SPL_LOAD_IMX_CONTAINER and AHAB_BOOT both enabled, so we do not need to worry about potentially falling back to legacy images in a secure boot scenario. Future work could include merging imx_container.h with imx8image.h, since they appear to define mostly the same structures. Signed-off-by: Sean Anderson

Merge tag 'u-boot-imx-20231016' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

2023-10-16T21:34:38Z

u-boot-imx-20231016 ------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/18168 - Imrovement MX93 - Toradex: fixes - Convert to DM (serial, watchdog) for some boards - HAB improvements for Secure Boot - DTO overlay for DHCOM - USB fixes, Mass storage for MX28 - Cleanup some code - Phytec MX8M : EEProm detection, fixes - Gateworks Boards improvements

Merge tag 'u-boot-amlogic-20231015' of https://source.denx.de/u-boot/custodians/u-boot-amlogic

2023-10-16T13:09:54Z

- add Amlogic A1 clock driver - add Amlogic A1 reset support - add USB Device support for Amlogic A1 - enable RNG on Amlogic A1 & Amlogic S4 - move Amlogic Secure Monitor to standalone driver

usb: ehci: mxs: Use regulator_set_enable_if_allowed()

2023-10-16T06:46:01Z

Since commit 4fcba5d556b4 ("regulator: implement basic reference counter") the return value of regulator_set_enable() may be EALREADY or EBUSY for fixed/GPIO regulators. Switch to using the more relaxed regulator_set_enable_if_allowed() to continue if regulator already was enabled or disabled. This fixes the following error when running the 'ums' command: => ums 0 mmc 0 UMS: LUN 0, dev mmc 0, hwpart 0, sector 0x0, count 0xece000 Error enabling VBUS supply g_dnl_register: failed!, error: -114 g_dnl_register failed Signed-off-by: Fabio Estevam Reviewed-by: Marek Vasut

usb: ehci: mxs: Fix the USB node pointer retrieval

2023-10-16T06:46:01Z

Use dev_ofnode() to retrieve the USB node pointer from the udevice structure. This fixes the following build error: drivers/usb/host/ehci-mxs.c:143:38: error: 'struct udevice' has no member named 'node_' Signed-off-by: Fabio Estevam Reviewed-by: Marek Vasut

usb: gadget: atmel: fix transfer of queued requests

2023-10-13T11:42:10Z

In the existing implementation, multiple requests queued up on an endpoint are subject to getting evicted without transmission. For both control and bulk endpoints, their respective logic found in usba_control_irq()/usba_ep_irq() guarantees that TX FIFO is empty before data is sent out, and that request_complete() gets called once the transaction has been finished. At this point however, if any additional requests are found on the endpoint queue, they will be processed by submit_next_request(), which makes no checks against the above conditions, trashing data on a busy FIFO and neglecting completion handlers. Fix the above issues by removing the calls to submit_next_request(), and thus forcing the pending requests to be processed on the next pass of the respective endpoint logic. While at it, remove a DBG message, as that branch becomes part of regular flow. This restores mass storage mode operation on Microchip ATSAMA5D27 SoC. Signed-off-by: Artur Rojek

dwc3: add support for Amlogic A1 family

2023-10-12T11:39:41Z

Now the driver supports also A1 phy layer. Signed-off-by: Alexey Romanov Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20231005085434.74755-8-avromanov@salutedevices.com Signed-off-by: Neil Armstrong

Merge branch 'next'

2023-10-02T14:55:44Z

Signed-off-by: Tom Rini