u-boot.git/drivers/usb, branch v2024.04-rc2

treewide: Remove clk_free

2024-01-30T03:35:02Z

This function is a no-op. Remove it. Signed-off-by: Sean Anderson Link: https://lore.kernel.org/r/20231216193843.2463779-3-seanga2@gmail.com

Merge patch series "k3-j721e: beagleboneai: Fix USB"

2024-01-20T16:39:13Z

Roger Quadros says: Hi, This series fixes USB operation on k3-j721e based boards.

usb: cdns3: avoid error messages if phys don't exist

2024-01-20T16:38:18Z

The phys property is optional so don't complain if it doesn't exist in device tree. Signed-off-by: Roger Quadros

configs: rockchip: Use dwc3-generic driver on RK3328 and RK3399

2024-01-19T02:57:36Z

Complete the transition away from xhci-dwc3 and dwc3-of-simple drivers and change to use the dwc3-generic driver on remaining RK3328 and RK3399 boards. MISC, USB_DWC3 and USB_DWC3_GENERIC is enabled on boards that used to enable USB_XHCI_DWC3. USB_XHCI_DWC3 is dropped from updated boards along with the default y of USB_XHCI_DWC3_OF_SIMPLE. There is no intended change in functionality with this changes, USB 3.0 is expected to continue same as before this change. Signed-off-by: Jonas Karlman Reviewed-by: Marek Vasut Reviewed-by: Kever Yang

fastboot: multiresponse support

2024-01-09T13:58:33Z

Currently u-boot fastboot can only send one message back to host, so if there is a need to print more than one line messages must be kept sending until all the required data is obtained. This behavior can be adjusted using multiresponce ability (getting multiple lines of response) proposed in this patch. Signed-off-by: Ion Agorria Signed-off-by: Svyatoslav Ryhel Reviewed-by: Mattijs Korpershoek Link: https://lore.kernel.org/r/20240105072212.6615-2-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek

global: Drop common.h inclusion

2023-12-21T13:54:37Z

In order to make it easier to move on to dropping common.h from code directly, remove common.h inclusion from the rest of the header file which had been including it. Reviewed-by: Simon Glass Signed-off-by: Tom Rini

Merge tag 'v2024.01-rc4' into next

2023-12-05T02:39:57Z

Prepare v2024.01-rc4 # -----BEGIN PGP SIGNATURE----- # # iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmVuHrwACgkQFHw5/5Y0 # tyy3Tgv+LB/X0ZR3IHnu1mvQ7kpOFvAjjKr0BUpcEEzsrDZeJnS6sy06m+REez2E # UmuLeKFj5NUCYXNKtxn2+gVnJt8Tk6ftxhMTiZHmR4Y4NVc5aPtqYmVsv6Q29j0U # mcg7AGcZTniu9/naNM+ZcDeHzLDAB0whmE9eVfixXVgyitILoLHNdFiQ7W4oR7Kh # /mBgdMDBS3rqiRi6CuqKUnl4ADX8T3AXaSfi3hqOC5Pj+HPkZSUfyWx31mu9mN1D # wXTHASZX06Dop25fm/ZSdWk1blBw29WqRiJBdwNatvyC5pqMsotTvAfH2AcHBEYg # tpoper+WDOBAipt6b6Y1B7q4VPvJ97L9dFCAYqN0nGCe+rkdi+k+cly7M6Ye9xLt # e7rVUfnKgIMP8jkLcVBYoWkFY5FiJ82O5qjoF5N3dAuHeWacDFsB5TugDTOQvblH # LWCmcIyU1N9Ma/Ib0rTvNduvpBUYBKXYlD1+rjPZUbTUnfc79mf+ReFpcoW6Kxh+ # bkz81p8P # =ebIZ # -----END PGP SIGNATURE----- # gpg: Signature made Mon 04 Dec 2023 01:47:24 PM EST # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini " [ultimate]

usb: USB_XHCI_PCI depends on PCI

2023-12-01T15:01:59Z

Compiling with CONFIG_USB_XHCI_PCI and CONFIG_PCI=n results in usb/host/xhci-pci.c:48:(.text.xhci_pci_probe+0x44): undefined reference to `dm_pci_write_config32 Add the missing Kconfig dependency. Signed-off-by: Heinrich Schuchardt Reviewed-by: Mark Kettenis Reviewed-by: Marek Vasut

usb: dwc3-generic: Use combined glue and ctrl node for RK3588

2023-12-01T13:06:12Z

Like Rockchip RK3328 and RK3568, the RK3588 also have a single node to represent the glue and ctrl for USB 3.0. Use rk_ops as driver data to select correct ctrl node for RK3588 DWC3. Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang Reviewed-by: Marek Vasut

usb: xhci: Fix DMA address calculation in queue_trb

2023-12-01T13:06:04Z

We need to get the DMA address before incrementing the pointer, as that might move us onto another segment. Signed-off-by: Hector Martin Reviewed-by: Marek Vasut